I have made a small observation that I hope one of you can confirm or deny. I am using a carto tank with pre punched smoketech 2.ohm carto. I started using it on my darwin playing with the wattage/voltage until it was just right. I wound up cranking it all the way up to 12.7 watts which on my darwin was reading 5.2 volts. Delicious vape ! Now my normal go everywhere device is the Provari so when I switched to the provari and copied the darwin's setting of 5.2 volts, it seems like its firing more , burning hotter and needs to be turned down . Why at the same voltage is the carto acting different?
Provari Voltage Comparison
- Thread starter djeleveneleven
- Start date
- th_trl_thread_readers 0
-
- Tags
- provari
- Status
id say its off more than that though anything over 4.7 seems to be too too high producing less vapor and harsher believe it or not. the darwin at 12.7/5.2 is perfect. I cant seem to find that perfect spot on the provari
Well the first thing I would suggest is a 3 ohm carto on a Provari instead of a 2 ohm. This allows a wider range of adjustment. I'm also having a hard time visualizing 12.5 watts through a carto without burning it. (unless it's a dual coil)
I would also be aware of air flow on the Provari with a tank type setup. I do this to the bottom of my tanks so that I don't have to worry about blocking off the air.
I would also be aware of air flow on the Provari with a tank type setup. I do this to the bottom of my tanks so that I don't have to worry about blocking off the air.
Last edited:
it seems to get near the same vape its 4.5 volts on the provari and 12.7 watts or 5.2 volts on the darwin. why is that? airflow is definately not an issue as there is a buffer between them but that looks nice! what kind of carto is that?
That looks like a V1 Provari (2.5 amp limit) If it is Provape will upgrade it to a V2 (3.5 amp limit) for a very reasonable price.
There are several good cartos to choose from. I use this one on my Provari, but I only run 8 watts through a single coil carto.
ElectronicStix.Com · 510 Punched Cartomizers
There are several good cartos to choose from. I use this one on my Provari, but I only run 8 watts through a single coil carto.
ElectronicStix.Com · 510 Punched Cartomizers
Last edited:
i paid them to upgrade already is it possible they didnt do it? and thanks for clearing that up alb53
Curious. What resistance does the carto read at on the Provari?
Tapatalking on iPhone.
Join the CASAA.
Protect your Vaping Rights!
Tapatalking on iPhone.
Join the CASAA.
Protect your Vaping Rights!
not quite sure if i have a means of checking the output voltage outside of the provari atm but I have been toying around with this thing since we all had a chat and there is no voltage I can set the provari to where it matches the taste and how the darwin is making the carto fire. I think maybe the batteries are different for 1 and there is something the darwin is doing with the amps. The provari is reading 2amps and the darwin at 12.7 watts 5.2v reads 2.5amps
- Status
Similar threads
- Locked
