ProVarinati Diner & Saloon and Beyond

[Hobbs]

Well, I just got a new to me Radius EXACTLY like the one I already have LOL ... should be here Monday

If I REALLY like something and they're scarce, I try to get two (my buddy, Mason)

 

[JUMA55]

It's fairly easy to tweak, Hobbs. Get yourself a nice lil calculator (ejuicemeup is one, but there are many) and you can twerk to your hearts delight with the PG and VG. 18mg to 12mg is a super swift task.





I shall call on our HOT TEXAN master for this question. He's had that problem for as long as I've known him, which is a while.

@JUMA55 - questions for ya.






70/30 (or my iteration which is 65/35) carries a lot more flavor and just enuf VG to produce some lovely vapor. No, not cloudy, but just enuf without muting the original design.




You can DO it!

I've used a bunch of tanks over the years, and I've never had a Kabuki leak--except when I got a bad coil or I had cracked the glass without knowing it. I go in and out of cold buildings and hot cars in the summer. No leaking.

 

[JUMA55]

It's fairly easy to tweak, Hobbs. Get yourself a nice lil calculator (ejuicemeup is one, but there are many) and you can twerk to your hearts delight with the PG and VG. 18mg to 12mg is a super swift task.





I shall call on our HOT TEXAN master for this question. He's had that problem for as long as I've known him, which is a while.

@JUMA55 - questions for ya.






70/30 (or my iteration which is 65/35) carries a lot more flavor and just enuf VG to produce some lovely vapor. No, not cloudy, but just enuf without muting the original design.




You can DO it!

And I should have said my juice is 50-50.

 

[JUMA55]

Enaud ... I DO play around a bit with coil tightness. The reason being I sometimes see a drop of liquid on the (ProVape) mod pin and on the bottom of the (Kabuki) coil from time to time (not always) when I remove the tank from the mod. I tighten the top and bottom of the tank well too ... I have one of those gripper thingies for tanks and coils that rebuilders use. But I never have had the coil stay in the top part when removing the bottom of the Kabuki from the top to fill or replace a coil. So I guess I'm not over tightening the tank to the mod or anything.

EDIT: NC can get pretty warm. Not that much different than Lower Alabama I guess. But the greater commonality is that you and Zen Knitter BOTH have higher PG than VG and NEITHER of you have the (minor) issues I have in the summer. Might be something to it.

On the Kabukis I use at home, which are all stainless, I do get a bit of condensation inside the well on a ProVari. But with the Kabuki Ti's that going inside and outside a lot, I've never gotten any liquid inside the well.

 

[Hobbs]

On the Kabukis I use at home, which are all stainless, I do get a bit of condensation inside the well on a ProVari.

Could be what I'm seeing from time to time. Sometimes it looks like little dots of liquid around the mod pin edge/rim, sometimes simply like a sheen on the coil bottom and pin ... but is liquid. I can see that it is when I run my finger across it or dab with a clean white cloth. I called it a "drop" in a previous post. Never a puddle and never enough for me to vape and see what it is exactly ... guess I could try and taste it, but I vape flavorless and my taste buds were ruined a.long. time ago by stinkies. Even so, prolly wouldn't be enough to taste anyway. Got me thinking out loud LOL

EDIT: All 4 of my Kabukis are P3 threaded and only used on ProVari

 

[ENAUD]

Could be what I'm seeing from time to time. Sometimes it looks like little dots of liquid around the mod pin edge/rim, sometimes simply like a sheen on the coil bottom and pin ... but is liquid. I can see that it is when I run my finger across it or dab with a clean white cloth. I called it a "drop" in a previous post. Never a puddle and never enough for me to vape and see what it is exactly ... guess I could try and taste it, but I vape flavorless and my taste buds were ruined a.long. time ago by stinkies. Even so, prolly wouldn't be enough to taste anyway. Got me thinking out loud LOL

EDIT: All 4 of my Kabukis are P3 threaded and only used on ProVari

Ah, well that's just part of the design, according to Zen. Perfectly natural.

 

[Hobbs]

Ah, well that's just part of the design, according to Zen. Perfectly natural.

AH-HA !!! Very good to know. Thanks Enaud. Lest now I know it's perfectly natural.

 

[JUMA55]

Could be what I'm seeing from time to time. Sometimes it looks like little dots of liquid around the mod pin edge/rim, sometimes simply like a sheen on the coil bottom and pin ... but is liquid. I can see that it is when I run my finger across it or dab with a clean white cloth. I called it a "drop" in a previous post. Never a puddle and never enough for me to vape and see what it is exactly ... guess I could try and taste it, but I vape flavorless and my taste buds were ruined a.long. time ago by stinkies. Even so, prolly wouldn't be enough to taste anyway. Got me thinking out loud LOL

EDIT: All 4 of my Kabukis are P3 threaded and only used on ProVari

Mine are all P3 threaded too. (And I've never found the 510 adapter to work consistently.) I've gotten into the habit of swabbing out the well when I refill the tanks. I use Dukal cotton tipped applicators, which I get from Amazon, rather than regular Q-tips as I've found them to leave less lint behind to get caught in the threads.

 

[Pinggolfer]

With all of the Kabuki talk this baby looks out of place.

 

[beckdg]

Well, I just got a new to me Radius EXACTLY like the one I already have LOL ... should be here Monday

If I REALLY like something and they're scarce, I try to get two (my buddy, Mason)

Beautiful girls!

Guns don't kill people, virgins do! -Jim Jeffries

 

[FringeChief68]

Our view: Legislators still attack vaping, even as evidence of its benefits mounts

 

[FringeChief68]

Don't stop watching
Wait for it

 

[RadiusNick]

i just ordered a new red radius for a descent price.
I'm surprised it went under the radar for so long,
especially since I've been to so many sites around the world looking for one and somehow missed this one.

reds are gone now,but there is still a black and a white.
pm me if you're interested.(I'll give priority to the persons I've seen in this thread since i joined it)

 

[Hobbs]

Still don't have access to the classifieds. Thought I would by now. Did everything right with no problems when verifying by paypal last week. Shoot

 

[FringeChief68]

Still don't have access to the classifieds. Thought I would by now. Did everything right with no problems when verifying by paypal last week. Shoot

Maybe @classwife can help

 

[Pinggolfer]

i just ordered a new red radius for a descent price.
I'm surprised it went under the radar for so long,
especially since I've been to so many sites around the world looking for one and somehow missed this one.

reds are gone now,but there is still a black and a white.
pm me if you're interested.(I'll give priority to the persons I've seen in this thread since i joined it)

60 or 40 Watts

 

[ENAUD]

To anyone who has a Triton mini, will the Nautilus coils fit in it and work?

 

[gnees]

Yes.

TRITON MINI by Aspire | Spinfuel VAPE

"Rightly or wrongly, the Aspire Triton Mini can make use of any leftover Nautilus coil heads you may have stashed away. "

 

[ENAUD]

Yes.

TRITON MINI by Aspire | Spinfuel VAPE

"Rightly or wrongly, the Aspire Triton Mini can make use of any leftover Nautilus coil heads you may have stashed away. "

Thanks for the link gnees

 

[Hobbs]

Caught my eye: