ProVarinati Diner & Saloon and Beyond

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,543
Happy to be... Not Smoking!!!
Soooooooooooooo...I bought some goodies in the classies last week, and among them was a Zen Atty Pro minus glass and a drip tip. I've been poking around ECF and the internet to try to learn more about it and see what I would need to turn the metal into something to vape on. So far, it looks like it is pretty old school and the threads are locked for new posting. I would like to try to get this to work, but there is so much I don't know about it that I'm not positive what to start with.

I found the Fused Quartz Glass Replacement Tank (Fits Kabuki, Mini, & Rokkaku) store that seems to be the last place to get parts, but I'm not sure what all will fit this. Does it really work with anything Kabuki? If I want the purty OMG rings, will they work on this one too? Will any drip tip work, or do I need to get one of the ones on ZFO?

I still haven't been brave enough to make my own coil, but can I use some of those pre-made FT coils and rayon on this tank or do I need to get some of that mesh or ceramic stick?
A good source for info...

Legacy Products
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,543
Happy to be... Not Smoking!!!
Soooooooooooooo...I bought some goodies in the classies last week, and among them was a Zen Atty Pro minus glass and a drip tip. I've been poking around ECF and the internet to try to learn more about it and see what I would need to turn the metal into something to vape on. So far, it looks like it is pretty old school and the threads are locked for new posting. I would like to try to get this to work, but there is so much I don't know about it that I'm not positive what to start with.

I found the Fused Quartz Glass Replacement Tank (Fits Kabuki, Mini, & Rokkaku) store that seems to be the last place to get parts, but I'm not sure what all will fit this. Does it really work with anything Kabuki? If I want the purty OMG rings, will they work on this one too? Will any drip tip work, or do I need to get one of the ones on ZFO?

I still haven't been brave enough to make my own coil, but can I use some of those pre-made FT coils and rayon on this tank or do I need to get some of that mesh or ceramic stick?
One more link...

https://squareup.com/market/houseofhybrids
 

cats5365

Super Member
Supporting Member
ECF Veteran
Verified Member
Dec 27, 2013
764
6,789
United States

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,543
Happy to be... Not Smoking!!!
What is the difference between this store and ZFO? Everything seems to link back to House of Hybrids and NY, so I'm a bit confused.
They are all connected.

Just different levels of newness is all.

Grab all you can while it is still available.
 

WillyZee

Vaping Master
ECF Veteran
Verified Member
Sep 23, 2013
9,930
36,929
Toronto
74874862543317e081864e53b43e4881.jpg



Sent via iPhone
 

ENAUD

Resting In Peace
ECF Veteran
Verified Member
Jul 23, 2013
9,810
64,089
Bordertown of ProVariland and REOville
Soooooooooooooo...I bought some goodies in the classies last week, and among them was a Zen Atty Pro minus glass and a drip tip. I've been poking around ECF and the internet to try to learn more about it and see what I would need to turn the metal into something to vape on. So far, it looks like it is pretty old school and the threads are locked for new posting. I would like to try to get this to work, but there is so much I don't know about it that I'm not positive what to start with.

I found the Fused Quartz Glass Replacement Tank (Fits Kabuki, Mini, & Rokkaku) store that seems to be the last place to get parts, but I'm not sure what all will fit this. Does it really work with anything Kabuki? If I want the purty OMG rings, will they work on this one too? Will any drip tip work, or do I need to get one of the ones on ZFO?

I still haven't been brave enough to make my own coil, but can I use some of those pre-made FT coils and rayon on this tank or do I need to get some of that mesh or ceramic stick?
That glass will fit the ZAP attie you got, I build mine with cotton, it's little tricky to get it right. With the stock size hole for the wick, I find its best to use a tapered wick, with a very skinny portion that goes down into the tank.

It's a Genesis atomizer and there are threads in the atomizer sub forum where you might get some good info on building them. These atties were really designed to use the oxidized mesh as a wick, some folks love them, but many more have had problems ever getting the hang of how to build them. If you've never wrapped a coil before, there are a ton of easier to build atties out there, that will work much better with pre wound coils, Kayfuns come to mind.
Good luck.

PS, oh, any 510 drip tip should work, they tend to be a little tight fitting.
 

Opinionated

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2015
11,168
59,365
56
My Mountain
Click Play :laugh:




Hahaha.. don't show this to my cat! That's all I need is for her to think ill come running if she rings a bell as if I was the maid..

She just learned this week that she can wake me up, and that's been horrible enough! Haha
 

Users who are viewing this thread