ProVarinati Diner & Saloon and Beyond

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,862
San Bernardino area, So. Cal.
I have a question. My Dragon. as well as a couple other of my 2.5's is suffering from the blinking light when the battery is still checking at 3.90 ish volts. They have been cleaned, with new springs. I'm wondering if it's due to the ol AW's are getting old, like going on 4 years old?
 

Storm52

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jan 27, 2014
2,157
5,001
Shreveport, LA
I have a question. My Dragon. as well as a couple other of my 2.5's is suffering from the blinking light when the battery is still checking at 3.90 ish volts. They have been cleaned, with new springs. I'm wondering if it's due to the ol AW's are getting old, like going on 4 years old?
It's the battery. My AWs performed the same at the end of their cycle.
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
Or, an extension ring, opl? Go 18650?

I don't like the idea of the adaptation of button tops, tho I have no realistic info to share on that. I just find the idea like one asking for probs. To me, it's like tossing a magnet on top. Not kool.
 

FringeChief68

Kingsguard
ECF Veteran
Verified Member
Oct 10, 2013
14,582
77,416
Pittsburgh, Pa, USA
skate-smiley.gif


 

Storm52

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jan 27, 2014
2,157
5,001
Shreveport, LA
Guess I'm gonna have to get serious about getting some 18500 button tops from somewhere, and I'll also look into the adapter buttons for the flat top batts.
Orbtronic 3000mah recommended by DPL.
 

jwbnyc

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Mar 4, 2014
6,014
24,279
I'll try a couple of efest. I vape 1.8Ω at 4.5v, so shouldn't be over powering those things.

Honestly, I haven’t had any problems with the Vapcells.

They aren’t as resilient as the AWs, but they have mega mAhs.

They have been fine for low Watt vaping for me.

They are a bit long, but that has not been an issue. Just don’t screw them down too tight.

I know Mooch is ...... at them for swapping the larger batteries on him, but the 18350’s have been okay in my experience.
 
Last edited:

jwbnyc

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Mar 4, 2014
6,014
24,279
Free Skaters get all the press, but those Ice Dancers have some serious skills and technique. Thanks for sharing the video. :thumbs:

Ice dancing is the real ice skating these days.

Free skating is just gymnastics on skates, at this point.
 

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,862
San Bernardino area, So. Cal.
Honestly, I haven’t had any problems with the Vapcells.

They aren’t as resilient as the AWs, but they have mega mAhs.

They have been fine for low Watt vaping for me.

They are a bit long, but that has not been an issue. Just don’t screw them down too tight.

I know Mooch is ...... at them for swapping the larger batteries on him, but the 18350’s have been okay in my experience.

Where do you get your vapecells?
 

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,862
San Bernardino area, So. Cal.
Or, an extension ring, opl? Go 18650?

I don't like the idea of the adaptation of button tops, tho I have no realistic info to share on that. I just find the idea like one asking for probs. To me, it's like tossing a magnet on top. Not kool.

I'm really wanting to keep the Dragon at 18490/18500 size.
 

Users who are viewing this thread