PV hiddin inside Inhaler?

[goonie]

Sorry if you thought I had one already made ....

I was at work today, stealth vaping at my my PV under my desk as usual and it got me thinking. If I had asthma and I puffed on an inhaler that blew out smoke nobody would care.

Anyone modded their PV to fit inside a medical inhaler?

 

[ZeroNullity]

Haven't seen one but it could be done... might be a bit odd looking to someone who actually uses a inhaler... given the fact it would give off vapor. Inhaler gives off a fine mist a bit different then vapor. Maybe they wouldn't mind if you just explained it? Or just use one that looks like a pen & use it lightly.

 

[goonie]

Now that I have a 6v flashlight mod under my belt ... this is going to be my next project. I want to keep it looking like an inhaler as much as possible (including the inhaler cartridge).

Its ok if you want to call me crazy =)

 

[crashtestjeep]

(umm, maybe just tell people its an inhaler?) Not sure it would be pretty, but stealth for sure!

 

[foebea]

That could be useful in a possible dystopian society. hollowed out cannister could house the battery, atty recessed in the mouthpiece, drip only or with cartridge if you go small enough.. 510 would fit, 801 might be a bit long.

If nothing else, it'd be a conversation piece.

 

[AlexTM]

Has recently been done in a German forum: Elektronisches Rauchen Forum (a few pics, so you don't have to worry about language).

 

[goonie]

Can't access link without a username and password

 

[AlexTM]

Drats, drats, and double drats!
I was not aware that the tinklers boards were inaccessible without a PW, too; I thought just the internal ones were. I'll ask the original poster whether he wants to post the pics here, too, or whether I can post them.

 

[Big Hit]

Sorry if you thought I had one already made ....

I was at work today, stealth vaping at my my PV under my desk as usual and it got me thinking. If I had asthma and I puffed on an inhaler that blew out smoke nobody would care.

Anyone modded their PV to fit inside a medical inhaler?

When someone approached me in an aggressive manor asking me if I was smoking cigarettes I told them that I was using a nebulizer for my asthma.
They retreated sheepishly after I told them that.
I plan on using that tact with my Juice Box and plan on customizing it with stickers or labels from a reputable nebulizer manufacturer such as Mavis.

 

[marlboro_man]

I am gonna make one of these,, I have seen the pictures on the ddr site and i think I can do it! in the natual blue of my ventolin inhaler,,,,

I will be able to fit a 501 or dse103 or even a SKE8084 atty in the mouth piece...

and battery 3.7v icr18350 in the empty ventolin cannister,
I will also trying to not fit the switch on the outside as on the ddr site ..
I will try to incorperate the switch so that when you depress the cannister as you would for medicine it would activate the switch..atty

It will take me a few days to get the bits together but it will happen

No I am not that gorgeous person in the picture/wrong lippy colour

 

[goonie]

Marlboro man!!! You're going to beat me to it 8-o

Anyways - I was actually thinking of using this inhaler:

I would place the switch on the circle on the bottom area.

I was thinking of using kr8 cartos with 1 cr2 800mah battery ... maybe 5v if there is space.

Did you think of a solution how of to use the mouthpiece? It would have to be vaccum sealed from the battery, right?

 

[delspa]

Now that I have a 6v flashlight mod under my belt ... this is going to be my next project. I want to keep it looking like an inhaler as much as possible (including the inhaler cartridge).

Its ok if you want to call me crazy =)

I have an e-cigar, that being said you got me thinking. The e-cigar has a very large cartidge and the atomizer is also quite large. I would very much have a modded device that uses those carts & atomizers. I have scanned the forums looking for a device like this with no luck. I would think that with the more powerful volts it would be a natural that we all would also want the e-cigars base components so we wouldn't have to keep refilling then all the time. An 801 (the biggest size now on all the mods) can take around 12 to 15 drops in a brand new cart. My e-cagar can take over 30 drops and sometimes I can put in just under 40! I have no idea how to make such a mod. I will send this idea to all the mod makers because I don't want to spend anymore on a mod before I see if someone can make one like this. Good luck with this!

 

[marlboro_man]

Marlboro man!!! You're going to beat me to it 8-o

Anyways - I was actually thinking of using this inhaler:

I would place the switch on the circle on the bottom area.

I was thinking of using kr8 cartos with 1 cr2 800mah battery ... maybe 5v if there is space.

Did you think of a solution how of to use the mouthpiece? It would have to be vaccum sealed from the battery, right?

hello Cousin

Right I'll send 2 morrow what I got on it so far the German I have seen on there forum as a member I cannot show you ..Respect...its RED !!! Is crape ,,,I have a much better design which is covert )( (wellalmost covert) )( In the big house the other day I was vaping with vapour showing I mean like a smoke house trying to convince a chest nurse 300-lb-er wiyth COPD that this is the way to go Wasted !!!showing I felt like an intruder sorry I have to leave bye

I have to top up my 6 hr blue stuff cart chow ARthur

 

[driptip]

I have seen one of these made just cant remember where. But here is one that would be cool Cambridge Consultants - Cambridge Consultants brings the 'connected patient' concept to life also this is the one I saw that was modded http://t3.gstatic.com/images?q=tbn:...estandard/drugtopics/182008/514079/advair.jpg wow that is long I just think these would be better to mod. Danno

 

[marlboro_man]

Marlboro man!!! You're going to beat me to it 8-o

Anyways - I was actually thinking of using this inhaler:

I would place the switch on the circle on the bottom area.

I was thinking of using kr8 cartos with 1 cr2 800mah battery ... maybe 5v if there is space.

Did you think of a solution how of to use the mouthpiece? It would have to be vaccum sealed from the battery, right?

goonie

I dont think so mate
have you seen the one on the German Site ?? In Red?
I will have a prototype to show soon in blue

Take care

Good Fortunes alles

Art

 

[tmbrown327]

I'd like to have a mod like this for stealth vaping (planes etc.). Let's see someone give me crap about using a medical inhaler!

 

[goonie]

Marlboro - Do you usually start with schematics or do you just build as you go?

 

[marlboro_man]

Marlboro - Do you usually start with schematics or do you just build as you go?

Hi goonie

I'm dragging my feet a bit on this one, I have loads of the blue inhalors small and large, don't know where to start, yet...

I dont think I need a schematic with this as the principle is the same as any mod-box

I thought,the first one, I will take moulds ( caulking silicone) or glazing putty of the mouth piece first,, to make the base plate for atomiser, then I will work out the cannister part for the battery, inc. inc, switch, so really it's gonna be a suck it 'n' see??

I will be cutting the 1st one longways ( just to see where I can reinforce etc) in cross section, the full length of the moulded plastic

as soon as I get going, I will PM you with pic's


Art

 

[marlboro_man]

Marlboro - Do you usually start with schematics or do you just build as you go?

Hi goonie

I have built it and started a new post on battery mods

go have a look-see

http://www.e-cigarette-forum.com/forum/battery-mods/68904-nichalor-uk.html

Art

 

[marlboro_man]

I have seen one of these made just cant remember where. But here is one that would be cool Cambridge Consultants - Cambridge Consultants brings the 'connected patient' concept to life also this is the one I saw that was modded http://t3.gstatic.com/images?q=tbn:...estandard/drugtopics/182008/514079/advair.jpg wow that is long I just think these would be better to mod. Danno

Hi digidan

Thanks for the idea

I have one of these also

http://t3.gstatic.com/images?q=tbn:2...079/advair.jpg

so i think it will be my next covert inhaler project

Art