The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Q: Remove devil from TW mini ecig atomizer

Discussion in 'Cosmetic Mods' started by wdave, Jul 21, 2009.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. wdave

    wdave Ultra Member ECF Veteran

    Jun 11, 2009
    Cincinnati, OH
    I contacted TW and they said to try fingernail polish. It did not work. It appears impossible to get the logo off without destroying the paint.

    I understand I should get RN4075 rather than true DSE901 (they are different). Somebody told me TW ships RN4075 parts. This makes sense as the my cartridges from TW keep falling out of the "DSE901's" I got somewhere else. And filler in the TW cartridges ALWAYS sticks to the wick--someone suggested a DSE901 wick might push up too far into an RN cartridge.

    Anyway, any suggestions for a way out of my sad situation would be greatly appreciated.

    :Dave W.
  2. kinabaloo

    kinabaloo Vaping Master ECF Veteran

    I guess to remove the devil you can visit a holy man for a blessing of the e-cig.

    Or try garlic. Maybe upside down.

    There's many feel that there's an evil spirit lurking in their VP ;)

    Why not go for the brushed platinum look if acetone doesn't work.
  3. happily

    happily Ultra Member Verified Member ECF Veteran

    May 25, 2009
    anchorage, ak
    LMAO...........was thinking the same thing(exorcism)
  4. framitz

    framitz Moved On

    May 24, 2009
    RSM, CA
    Nail polish to cover it up should work of you can't get it off and don't want to remove all the paint. Maybe that's what TW meant?
  5. skullsoup432

    skullsoup432 Senior Member ECF Veteran

    Feb 7, 2009
    Michigan USA
    I'd rather laugh with the sinners than cry with the saints.

    ho ho ho-he he he-ha ha ha.
  6. wdave

    wdave Ultra Member ECF Veteran

    Jun 11, 2009
    Cincinnati, OH
    Nobody ever takes me seriously :(

    Since I got a little smarter, I think I will go with the true 901's anyway.

    I'm hoping the attys will last longer as their supposed to run cooler than the ones for the RN4075. I should have known something was up when TW didn't call their mini's 901's.

    Alcohol seems to take the white paint off my true 901. Back to Coke :)

  7. youfillintheblank

    youfillintheblank Super Member ECF Veteran

    Nov 13, 2008
    Ontario, Canada
    Stick one end of the atomizer in an electric drill (cover that end with masking tape first). Run the drill and use fine sandpaper to remove the paint, remove atomizer and do the same for the other end. You get nice shiny Stainless steel atomizers that way. You can do the same to the batteries too for the full SS effect, but I would cover the hole of the battery first, or maybe stick part of a toothpick in the hole so no metal filings foul the switch.
  8. slowmotioneric

    slowmotioneric Full Member ECF Veteran

    Jul 29, 2009
    Philadelphia, USA
    maybe they meant nail polish remover? that or rubbing alcohol and enough elbow grease usually i can get screen printed logos off whatever. Just hope the paint or whatever that is below it doesnt start to rub off...
  9. Zofryer

    Zofryer Ultra Member ECF Veteran

    Jun 4, 2009
    Near DC
    I want instructions on how to add a bigger devil with tattoo's, and a machine gun.
  10. wdave

    wdave Ultra Member ECF Veteran

    Jun 11, 2009
    Cincinnati, OH
    I LIKE the devil on the 510 PCC. It's white everyone know white devils are not near as bad as red devils :)
  11. DonDaBoomVape

    DonDaBoomVape Reviewer / Blogger ECF Veteran

    Jun 5, 2009
    South Florida
    I like the devil's head on the five 801 atomizers I recently received from TW ... but I will be using my blessed (i.e., plain) atomizer when leaving my home office to train corporate and government* clients. ;)

    * No, not the FDA! Think Neil Armstrong.
  12. SharonLM

    SharonLM Ultra Member ECF Veteran

    I've taken mine off with very fine steel wool. Didn't mar up the atty much at all.
  13. mmoolloo

    mmoolloo Full Member

    Jun 21, 2010
    Use 1000 or 1200 grit sandpaper on it really carefully. The paint will probably lose some shine, but you can then use some car polish and hopefully you'll end up with a plain atty. I wouldn't go through all that to remove a logo, but that's what I'd do if nail polish remover won't do it and I really wanted to.
  14. BarkeepCat

    BarkeepCat Senior Member ECF Veteran

    Jun 3, 2010
    Orlando, FL
    I am with you Dave...
    I personally don't buy or use anything from TW just because of the logo.
  15. whiskey

    whiskey Moved On

    Jan 13, 2010

  16. NuMoNiC

    NuMoNiC Senior Member ECF Veteran

    Apr 28, 2010
    My simple solution, gather all your TW gear that is stamped with their devils, walk to the nearest large body of water, and toss in. That will fix the problem, wont see their devil anymore, and paint on atty should be good for while!
  17. shameful26

    shameful26 Senior Member ECF Veteran

    May 26, 2010
    My Avatar and their logo hang out:laugh:
  18. Parky50

    Parky50 Super Member ECF Veteran

    Try some Ronsonol lighter fluid it works wonders !!!
  19. Rubicon

    Rubicon Senior Member Verified Member

    Apr 20, 2011
    Tampa Bay, FL
    I bought TW just for the devil logo
  20. SantoLoco

    SantoLoco Full Member

    Nov 10, 2011
    New Orleans
    I have a she devil on mine! :p
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice