Q: Remove devil from TW mini ecig atomizer

[wdave]

I contacted TW and they said to try fingernail polish. It did not work. It appears impossible to get the logo off without destroying the paint.

I understand I should get RN4075 rather than true DSE901 (they are different). Somebody told me TW ships RN4075 parts. This makes sense as the my cartridges from TW keep falling out of the "DSE901's" I got somewhere else. And filler in the TW cartridges ALWAYS sticks to the wick--someone suggested a DSE901 wick might push up too far into an RN cartridge.

Anyway, any suggestions for a way out of my sad situation would be greatly appreciated.

Thanks,
ave W.

 

[kinabaloo]

I contacted TW and they said to try fingernail polish. It did not work. It appears impossible to get the logo off without destroying the paint.

I understand I should get RN4075 rather than true DSE901 (they are different). Somebody told me TW ships RN4075 parts. This makes sense as the my cartridges from TW keep falling out of the "DSE901's" I got somewhere else. And filler in the TW cartridges ALWAYS sticks to the wick--someone suggested a DSE901 wick might push up too far into an RN cartridge.

Anyway, any suggestions for a way out of my sad situation would be greatly appreciated.

Thanks,
ave W.

I guess to remove the devil you can visit a holy man for a blessing of the e-cig.

Or try garlic. Maybe upside down.

There's many feel that there's an evil spirit lurking in their VP

Why not go for the brushed platinum look if acetone doesn't work.

 

[happily]

I guess to remove the devil you can visit a holy man for a blessing of the e-cig.

Or try garlic. Maybe upside down.

There's many feel that there's an evil spirit lurking in their VP

LMAO...........was thinking the same thing(exorcism)

 

[framitz]

Nail polish to cover it up should work of you can't get it off and don't want to remove all the paint. Maybe that's what TW meant?

 

[skullsoup432]

I'd rather laugh with the sinners than cry with the saints.

ho ho ho-he he he-ha ha ha.

 

[wdave]

Nobody ever takes me seriously

Since I got a little smarter, I think I will go with the true 901's anyway.

I'm hoping the attys will last longer as their supposed to run cooler than the ones for the RN4075. I should have known something was up when TW didn't call their mini's 901's.

Alcohol seems to take the white paint off my true 901. Back to Coke

Dave

 

[youfillintheblank]

Stick one end of the atomizer in an electric drill (cover that end with masking tape first). Run the drill and use fine sandpaper to remove the paint, remove atomizer and do the same for the other end. You get nice shiny Stainless steel atomizers that way. You can do the same to the batteries too for the full SS effect, but I would cover the hole of the battery first, or maybe stick part of a toothpick in the hole so no metal filings foul the switch.

 

[slowmotioneric]

maybe they meant nail polish remover? that or rubbing alcohol and enough elbow grease usually i can get screen printed logos off whatever. Just hope the paint or whatever that is below it doesnt start to rub off...

 

[Zofryer]

I want instructions on how to add a bigger devil with tattoo's, and a machine gun.

 

[wdave]

I LIKE the devil on the 510 PCC. It's white everyone know white devils are not near as bad as red devils

 

[DonDaBoomVape]

I like the devil's head on the five 801 atomizers I recently received from TW ... but I will be using my blessed (i.e., plain) atomizer when leaving my home office to train corporate and government* clients.

* No, not the FDA! Think Neil Armstrong.

 

[SharonLM]

I've taken mine off with very fine steel wool. Didn't mar up the atty much at all.

 

[mmoolloo]

Use 1000 or 1200 grit sandpaper on it really carefully. The paint will probably lose some shine, but you can then use some car polish and hopefully you'll end up with a plain atty. I wouldn't go through all that to remove a logo, but that's what I'd do if nail polish remover won't do it and I really wanted to.

 

[BarkeepCat]

Nobody ever takes me seriously

Dave

I am with you Dave...
I personally don't buy or use anything from TW just because of the logo.

 

[whiskey]

I'd rather laugh with the sinners than cry with the saints.

ho ho ho-he he he-ha ha ha.

BRAVO<BRAVO

 

[NuMoNiC]

My simple solution, gather all your TW gear that is stamped with their devils, walk to the nearest large body of water, and toss in. That will fix the problem, wont see their devil anymore, and paint on atty should be good for while!

 

[shameful26]

My Avatar and their logo hang out

 

[Parky50]

Try some Ronsonol lighter fluid it works wonders !!!

 

[Rubicon]

I am with you Dave...
I personally don't buy or use anything from TW just because of the logo.

I bought TW just for the devil logo

 

[SantoLoco]

I have a she devil on mine!