Question about itaste134

[framehacker]

Hey everyone I have a question I have had my vv/vw for some time now and would like to get a mech mod. I really like the itaste 134 but since it is a vw is it going to be limited more that a straight mech. I want to do some sub ohm builds but dont know if that device will handle it. Thanks

Sent from my SM-T210R using Tapatalk

 

[Papa_Lazarou]

To subohm, you will likely need an unregulated mech. The 134, like most regulated devices, won't fire a coil with that little resistance.

Now, before you pull the trigger on anything, have you considered a microcoil at about 1.4 ohms (with, say, a cotton wick)? It gives 'sick clouds', great taste, and is safe to operate on most any regulated device. Don't fall victim to the fashion of extreme vaping. Just sayin'.

 

[rob33]

The regulation within your device will not allow for sub ohm coils.

 

[framehacker]

To subohm, you will likely need an unregulated mech. The 134, like most regulated devices, won't fire a coil with that little resistance.

Now, before you pull the trigger on anything, have you considered a microcoil at about 1.4 ohms (with, say, a cotton wick)? It gives 'sick clouds', great taste, and is safe to operate on most any regulated device. Don't fall victim to the fashion of extreme vaping. Just sayin'.

Well I have recently ordered my kanthal and I am waiting on it. But I have done a lot of research and video watching on the micro coils. I will have to admit I was getting cought up in the fassion. I have an evic with a protank 2. And also ordered the innokin iclear30B. I think ill try some micro coil builds in my protank first and see how it does. But I know I cant go too low with the ohm level

Sent from my SM-T210R using Tapatalk

 

[framehacker]

To subohm, you will likely need an unregulated mech. The 134, like most regulated devices, won't fire a coil with that little resistance.

Now, before you pull the trigger on anything, have you considered a microcoil at about 1.4 ohms (with, say, a cotton wick)? It gives 'sick clouds', great taste, and is safe to operate on most any regulated device. Don't fall victim to the fashion of extreme vaping. Just sayin'.

Will 30awg kanthal be ok for th micro coil and not too low of a ohm ?

Sent from my SM-T210R using Tapatalk

 

[pdib]

30 gauge will be great for a 1.4Ω micro.

 

[classwife]

Moved to Variable Voltage APV Discussion from The Modding Forum - Battery Mods

Modding Forum
Modified your e-cig or built one yourself? This is the place to show it off!