RBA testers Needed.

[forcedfuel50]

I need 5 testers for our new rba.

Requirements:

Must own a Simplicity 18000 series.
Must be proficient in coil building.

Just to clarify, i'm not looking for reviewers. This is for testing purposes only and your feedback is to be confidential between Super T.

What we are looking for is what setups work best for you when using this device such as but not limited to:

What wire you use. What ohms you use. What wick you use. Single or dual coil preference(it can do dual or single coil). Vape times on your battery. What juice you use. Vape times out of your juice without refilling (its a dripper with a twist, it holds a couple of mls) Air draw preference. Etc.

Please post up what Simplicity model you own and what rba's you currently vape with if you'd like to be considered.

 

[Nach]

I'm in, David!

Precise Simplicity 18350, 14500, 2x ELA's.

I use DID's x3, Z-Atties, Cobra, Stratus 22, Synthesis and more

EDIT: I mostly like genesis tanks, but also use a few RDA's like IGO-L, DRA XL 2

EDIT 2: Please have a look at my personal vape porn album http://imgur.com/a/3TzAJ

 

[raqball]

I'm in, I scored a Titanium 18350!!!

I currently have a Spheroid, a Kayfun Lite, 2 Divers and an Immortalizer.

I have also had a Cyclone

I use both 30g and 32g kanthal along with 2mm and 3mm silica.

I run single coils at anywhere from 1.2ohms to 2ohms.

[Shameless Plug] I've been a hardcore Super T'er for almost 4-years now. Had the T1, the S6, the OG Precise 10440 and others so that should count for something right?[/Shameless Plug]

Thanks

 

[vaptamist]

I'm in. I have a simplicity 18500.

I currently use a Vicious Ant Cyclone, a kayfun lite and a kayfun v3.1. I've owned about 20+ rba's in the past so have pretty good experience with a variety (genesis and silica).

I mainly use 30 or 32g kanthal, but also play around with ribbon kanthal and nichrome. For wicks I mainly use ekowool, but also can do cotton, regular silica or SS mesh.

I can do single and dual coil setups.

I also beta test as part of my day job, so I'm pretty experienced in the testing discipline, and I'm also no stranger to confidentiality as part of my career.

 

[Riverboat]

I'm in, David
Please have a look at my personal vape porn album Vape Gear - Imgur

Very impressive collection Nach

 

[tppp]

Love to be involved.

Have a Precise Plus, mostly use a couple of Z-Atties or a Trident but have a range of rba/rda's.

 

[Freckle]

I need 5 testers for our new RBA.

Requirements:

Must own a Simplicity 18000 series.
Must be proficient in coil building.

Just to clarify, i'm not looking for reviewers. This is for testing purposes only and your feedback is to be confidential between Super T.

What we are looking for is what setups work best for you when using this device such as but not limited to:

What wire you use. What ohms you use. What wick you use. Single or dual coil preference(it can do dual or single coil). Vape times on your battery. What juice you use. Vape times out of your juice without refilling (its a dripper with a twist, it holds a couple of mls) Air draw preference. Etc.

Please post up what Simplicity model you own and what rba's you currently vape with if you'd like to be considered.

If I purchase a simplicity 1800 series can I qualify, and you can ship them at the same time? I would love to test it!

I currently own Kayfun 3.1, kayfun lite, kayfun mini, trident, nimbus, immortalizer, igo-l, igo-s, fatty, fatty res, fatty clone, era, hornet, cyclone, agi, era clone, iclear 16, sold a bunch also.


Oh my setups, ! I use ekowool in some, silica in others, mesh in all, and wire of 30-34. Single coils for me!

 

[Riverboat]

(its a dripper with a twist, it holds a couple of mls) Air draw preference. Etc. .

A dripper with a twist......mabey my RDA dreams have been answered I hope there will be one for the ELA before the end of the year?

 

[snork]

I have a 350 and a 650, plus the Kiklet extension. I do 1.5 0hm silica coils, am very persnickety about my RBA, dislike most of them, and am known to break things.

Oh, fairly tight draw too.

 

[Freckle]

I am just going to be straight up, this integrated rba was going to be the reason for the purchase of the 18000 series simplicity. I been waiting to see the build on it. Waiting. I been stalking this forum waiting for the photos. I saw the photos of the kayfun, knew the build looked nice and easy and it made sense. Only reason I could pull the trigger for such a high priced atty.

Wongster also has a heck of a lot of experience with a lot of different atomizers, he owns a simplicity already. If I don't qualify cause I don't own a simplicity 18000 series now, I beg of you to send him one. I trust wongster's opinion! No offense guys!

 

[forcedfuel50]

I am just going to be straight up, this integrated rba was going to be the reason for the purchase of the 18000 series simplicity. I been waiting to see the build on it. Waiting. I been stalking this forum waiting for the photos. I saw the photos of the kayfun, knew the build looked nice and easy and it made sense. Only reason I could pull the trigger for such a high priced atty.

Wongster also has a heck of a lot of experience with a lot of different atomizers, he owns a simplicity already. If I don't qualify cause I don't own a simplicity 18000 series now, I beg of you to send him one. I trust wongster's opinion! No offense guys!

If you see Wongster, let him know about this thread. I've seen some of his vid's, he's welcome to put his name in

 

[Freckle]

If you see Wongster, let him know about this thread. I've seen some of his vid's, he's welcome to put his name in.

I sent him a message right after I posted.

 

[raqball]

If you see Wongster, let him know about this thread. I've seen some of his vid's, he's welcome to put his name in.

I think wongster would be an excellent choice!

Oh and that dude raqball would be too!

 

[Riverboat]

I have very little experience with RBAs....mostly I hate them...I do not own a Simplicity and have no plans to buy one at this point (unless I get to test a RBA)... I am the perfect beta tester as I will be starting from scratch........you always need a beginner in a test group....

 

[pAth77]

I'm in if there's space. I have a Simplicity 18650. Current RBAs in rotation:

- Origen dripper
- Omega
- Nimbus
- Immortalizer
- Ithaka
- Penelope
- Taifun GT
- Kayfun 3.1
- Kayfun Lite

EDIT: I forgot to mention the types of setups I use. I am generally a single coil type of guy, and my current "go-to" setup is a single microcoil with 28g kanthal at 0.9-1.0 ohm. I prefer a medium draw (1.0-1.2mm equivalent). I'm tempted to try out dual coils again, but I need to get some higher resistance wire because all I have are 26g, 28g, 29g & 30g, all of which would result in an overall resistance that is too low for my liking. I used to like genesis RBAs and had Zens & DIDs/Temon, but they're not my cup of tea anymore. The same goes for ribbon wire.

 

[rojo]

I'm hesitant to offer, as looking at the offers you have, I can already tell that there are at least 5 who are more qualified than I.

Plus, my first Simplicity will be the Ti if I can score one. (edit: I did.)

But I'll throw my name in the fish bowl anyway. Nothing ventured, right?

I've either used in the past or currently use a Penelope, Terminator-C, Dream BT804, Kayfun 3.1, and a few Geneses. I generally wrap my coils using 34 gauge K-A1 @1.8 ohms and burn them via pure mech. I've tried micro coils with minimal success; dual coils with greater success (and still build dual coils in my Kayfun when the mood strikes); and experimented with other non-traditional coiling (such as dual coils with a single unbroken wick and wire, and tri and quad coils). I've got a healthy stock of Kanthal in 28, 30, 32 and 34 gauge; lots silver non-resistance wire if needed; and silica in 1, 2 and 3mm just waiting to be wasted on trial and error beta test configs.

 

[lctrc]

Sadly, I don't qualify. In lieu of my participation, I support vaptamist (for his experience) and snork (for his persnickety-ness).

No offense intended to the rest of the field.

 

[snork]

My drawback is that I know what I like, not necessarily what's good.

But I break things better than most.

 

[vdefazzio]

Never mind, didn't notice simplicity

 

[Geoscouter]

So happy to see progress on a SuperT RBA! While not a simplicity user I eagerly await a precise + RBA from SuperT. While I was hoping for more capacity as discussed on the Strata RBA thread I can make do with 1.5 ml. Here's wishing you a quick and successful beta.


Sent from my iPhone using Tapatalk