Status
Not open for further replies.

Capt' Brian

Unregistered Supplier
ECF Veteran
Remember the zombie cutlass? This Zebra lady has changed hands a few times and wound up with a failed regulator. Repairs would have been too costly for the owner so I bought her back but I couldn't leave it dead. So I opened her up, took out the old regulator, replaced the inner hardware, took it down to bare wood and got out the dings and dents and put it all back together with new outer hardware. Been my pet project you might say.

She is going to go into my own collection I think, it's the only Cutlass 5.1 I have presently.

 

Capt' Brian

Unregistered Supplier
ECF Veteran
Arrr,Itsa beaut cap'n!Ain't that one of the dual mode cutlass'?
That needs to be in yer cabin arrrr

Aye, it's a dual mode. Believe it or not (and you know me) the Cutlass II is a design I have been working on for a while. Taking all the suggestions, complaints and hints that I've gotten, taken the good, thrown out the bad and am turning it into yet another model. Dual mode of course. Some time down the road anyway....but it will not be the old fat one, I've not heard anyone complain yet about the new styles being "Too thin to hold", heh.
 

toto1013

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2011
4,449
6,683
SE Kansas
Lookit how perty she is!!!

photo-77.jpg

photo-78.jpg

photo-79.jpg

Just awesome Pchela....Capt' Brian is a Master Craftsman.....
 

Capt' Brian

Unregistered Supplier
ECF Veteran
Ahoy, not many mods left on the site, except for the Mark-10. So I knocked off $20 from them and don't forget, there is also a coupon code for another 5% discount "Booty".

$123.95 shipped for a 3.7v Inset tank mod ... this will not happen again, yo ho!

Mark-10 - Red Sky Mods


And I am gonna go kick back now, have a nice evening all, arrrr
 

fright88

Vaping Master
ECF Veteran
Verified Member
May 21, 2011
5,079
2,372
45
Loveland CO
Remember the zombie cutlass? This Zebra lady has changed hands a few times and wound up with a failed regulator. Repairs would have been too costly for the owner so I bought her back but I couldn't leave it dead. So I opened her up, took out the old regulator, replaced the inner hardware, took it down to bare wood and got out the dings and dents and put it all back together with new outer hardware. Been my pet project you might say.

She is going to go into my own collection I think, it's the only Cutlass 5.1 I have presently.


Looks great Cappy any chance at before pics. She looks just like my lady who's been a great first Mate since November!!
 

Slot-Tech

Vaping Master
ECF Veteran
Verified Member
Jun 29, 2011
3,317
5,113
California
Ahoy, not many mods left on the site, except for the Mark-10. So I knocked off $20 from them and don't forget, there is also a coupon code for another 5% discount "Booty".

$123.95 shipped for a 3.7v Inset Tank mod ... this will not happen again, yo ho!

Mark-10 - Red Sky Mods


And I am gonna go kick back now, have a nice evening all, arrrr

If I wasn't so strapped this would be the one I'd buy!!!!

#1004

Curly Maple & Macassar Ebony body, door and end caps

 

Capt' Brian

Unregistered Supplier
ECF Veteran
Ahoy, good morning, Happy Fathers day all you dad's out there.

#1004, yeah I thought that would be the first Lady to sail away, but alas ...

It's a bit of a bummer, but a couple days ago late at night I decided to put all the bottom end caps on and go to bed. I did, then next day realized I just eliminated the possibility of putting inlays like that on this batch. Sometimes I just get old and stupid I guess.... arrrr
 

Capt' Brian

Unregistered Supplier
ECF Veteran
Hi everyone. I have also been eyeing that #1004 Curly Maple & Macassar Ebony body, door and end caps. Finally!!!! I got the money together to get her sailing down my way. Thanks Captain!!! She's a beauty. I can't wait until she shows up at my door.

Congrats Dmorr, she will be on the tide tomorrow on the way to the port o' PA (didn't we pillage there last year?), hope you like her :)
 
Status
Not open for further replies.

Users who are viewing this thread