How do you order direct from Kindbright? On their website?
Reload Rta
- Thread starter Heartsdelight
- Start date
- th_trl_thread_readers 0
- Status
For all we know, 3f might be just saying that to peer pressure more ppl in to buying so their order is bigger and get a bigger discount.
Side note, rep is kinda cute. Haha.
Reload clone just popped up on fast tech
$12.00 Free Shipping Reload Style RTA Rebuildable Tank Atomizer (24mm, 304 SS + Glass, Silver) at m.FastTech.com
$12.00 Free Shipping Reload Style RTA Rebuildable Tank Atomizer (24mm, 304 SS + Glass, Silver) at m.FastTech.com
Well she didn't say it was not true, she said not ture which in mandarin means "get em while there hot" [emoji100] [emoji100] [emoji100] [emoji100] [emoji6]
Sent from my SM-N910P using Tapatalk
I went ahead and ordered the stainless steel kindbright reload from 3fvape as well. For $12 it is worth my peice of mind to compare that with the other 2 I am getting from hotecig. I will post back when I get them and compare, should be a couple weeks at least....sigh
Sent from my SM-N910P using Tapatalk
Sent from my SM-N910P using Tapatalk
I'd be willing to bet the Hotecig listing is Kindbright. Should have mine sometime next week, ordered from Kindbright should ship beginning of the week, and arrive here by end of week.
I did order more then minimum, however the MOQ really isn't enforced my order has several 1 piece selections in it. The problem with ordering direct is shipping cost, Kindbright, and most others will only ship via DHL which puts you at about $16.00 minimum for shipping, they also add fund transfer fees (PayPal or bank fee). I just ordered 3 Skyline atties from Coppervape, Shipping and fees was $27.00
So it really isn't worthwhile for small orders. The advantages are DHL China to USA is 2-4 days, I'm typically 3 days, quicker access to new items, and stuff sites like 3F or FT either discontinued or just never list.
So it really isn't worthwhile for small orders. The advantages are DHL China to USA is 2-4 days, I'm typically 3 days, quicker access to new items, and stuff sites like 3F or FT either discontinued or just never list.
I placed a ticket with 3f asking about the Black Reload Style Rta (order placed 5/25) & I included the order # for the SS (order placed 6/1). I think I confused them, you can only ask one question at a time. They replied my order will ship in 24 hrs, but they didn't say which order. Then a little while later I got a ship confirmation for the SS. Now I had to ask again, what about the black one? Whaaaaaa!
The Black is now sold out on 3f.
The Black is now sold out on 3f.
Opened a ticket and nearly ended up cancelling both by their staff haha. They are easily confused...
Black is sold out , yes. Opened a ticket too what's up there
Black is sold out , yes. Opened a ticket too what's up there
Hello again my vaping fam,ok got another question that I hope you'll be able to help me with,I wanted to get a mech mod(the new sqonker from boxer mods looks dope) but I have no experience with them,if I run say a .2 .3 ish build am I cool? Will it fire it? Being its unregulated will it fry my cotton instantly? Not sure how it all works so a few pointers would be much appreciated as I don't want to get something I can't use :-/
Hi Franck! I saw you on Mikevapes vid
yes .2, .3 for a mech is fine, it will fire. Do the ohms law calculation. It won't fry your cotton. When I first started with mechs, not that I'm that experienced but it's really not hard. I tried to build too high like .80-.90 ohms, I use LG HG2's so after I used ohms law I realized with the specs of the battery & .80-90 ohms I was firing it around (make believe too early for calculations) 18 watts barely a whisper of vape. So then I built it to .24 ohms, worked wonderfully. So first, look up ohms law with the specs of your battery & it will tell you how many watts a .2-.3 build will be. You will also be in the safe amperage of your batteries.
I got the Pulse bf rda &I am using my cheap Kanger Dripbox 60 watts. Its great! My build is a .42 ohm. I brought the Kanger to see if I liked squonking. I just brought on VU a Frankenskull clone for $13, second hand. I thought at first the Kanger was meh with a Hadaly clone, but it's not the Kanger it's you need a good bf rda.
Love that Boxer Squonk box too! Maybe buy a cheap Squonk to try first & if you like it then invest.
Hope this helps.
Hi there,yes it sheds a little more light on the subject thank you so muchHi Franck! I saw you on Mikevapes vid
So first, look up ohms law with the specs of your battery & it will tell you how many watts a .2-.3 build will be. You will also be in the safe amperage of your batteries.
I got the Pulse bf rda &I am using my cheap Kanger Dripbox 60 watts. Its great! My build is a .42 ohm. I brought the Kanger to see if I liked squonking. I just brought on VU a Frankenskull clone for $13, second hand. I thought at first the Kanger was meh with a Hadaly clone, but it's not the Kanger it's you need a good bf rda.
Love that Boxer Squonk box too! Maybe buy a cheap Squonk to try first & if you like it then invest.
Hope this helps.
I was looking at the pulse actually,how do you like it? Is it a smooth vape? (airflow wise) or is it turbulent?
Very smooth! It's really good! Love the way it distributes the juice into both channels when you Squonk & it doesn't leak because of the airflow tubes. Definitely more than worth it!Hi there,yes it sheds a little more light on the subject thank you so much
Ok then I shall get one next week,didn't have much luck with the druga or the icon,I can't seem to nail coil position and they vape very harshly,what kind of coil are you running in the pulse? Do you have you're coil set pretty high up as well?
I'm using Claptons, I think it was 26*2/32g Geekvape wire, 6 wraps, .42 ohms, 3mm I.d. Yes, I measured the legs to be 7mm long. Watch djlsb vapes vid he used the ultem driptip as a guide to the coil legs length & he measured 7mm long. You want the coil to be positioned high enough so the airflow tubes are centered on the coil for best flavor.
- Status
