Do any Reo compatible rba's have adjustable air flow, or at least a stiffer draw than the RM2? I love my RM2, but I like a slightly stiff draw.
Reo compatible RBAs
- Thread starter hildicat
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic fasttech mt baker myvaporstore
- Status
I did that made one on each side. But maybe there is a special way to try duel coils on it. I tried one on each side and it didn't work
You can get an adjustable airflow cap for the cyclone but try a piece of tape over part of the reomizer hole or a small piece of metal inside it.
http://www.e-cigarette-forum.com/fo...ir-hole-battery-charge-its-all-connected.html
Dibby's RM2's have adjustable airflow. I'm not sure a cyclone with AFC fits in the Reo drip well unless the drip well has been milled flat.
T
Dibby's RM2's have adjustable airflow. I'm not sure a cyclone with AFC fits in the Reo drip well unless the drip well has been milled flat.
T
Maybe this thread will help?
http://www.e-cigarette-forum.com/forum/reos-mods/468695-dual-coil-dual-wick-reo-rm2-4-ohms.html
http://www.e-cigarette-forum.com/forum/reos-mods/468695-dual-coil-dual-wick-reo-rm2-4-ohms.html
i wrap dual coils on the same wick in an RM2 - no need to drill another hole then.
Plus - i am bone idle.
T
Plus - i am bone idle.
T
Thanks for the info guys! I' m gonna try the tape first, and see how that goes.
Ok, probably a stupid question but i need to ask it because it will affect what Reo i buy. Will the RM2 work on the VV Woodvil? I really want a Woodvil but after reading for a few hours here it appears only a couple RBA's will work with it? Really like the RM2 and if it isn't compatible with the VV Woodvil i'll have to go with the Grand.
ya the RM2 works fine on the VV mods i have a VVW and a VVG both with RM2s on them
The RM2 will work on any REO. But with the wood REO's you should let Robert know that it is going on a wood REO when you order. There are so many different catch cups on the woods that a stock RM2 will not fit.
BTW, Robert is not making VV Woodvils this time. Your only bet to purchase is to grab a used one.
I appreciate the help! VV or no, i must get me a wood(if i'm lucky enough). Just wanted to make sure what the RM2 would fit on.
Just wanted to add this to this thread:
Now that we can custom order our metal Reos with the catch cup milled down, virtually any rba with a 510 connection will fit.
Now that we can custom order our metal Reos with the catch cup milled down, virtually any rba with a 510 connection will fit.
But the thread is not 'RBA compatible Reos'! I will admit popping into work today to see how to chuck my Reo on the lathe there 
T
T
But the thread is not 'RBA compatible Reos'! I will admit popping into work today to see how to chuck my Reo on the lathe there
T
True enough.
So..., did you figure out a way to gitt'r done???
yes - apparently i have to make something to hold it off centre of the chuck, but it's been a looong time since i used that gear. I'll naturally ask the guy that runs that thing what he reckons before i start metal churning.
Rob has posted that he has 10 000 parts = 5 000 low-ohm mod kits, which means 2 pieces per mod. Is it a new spring and a firing pin, or a new firing pin and non-melty button? The answer to that makes a difference to what i do to the bottom of the Reo after i face it.
So does the v-drop.
My black grand is due a rebuild kit soon anyway having been my all day vape for ages now, but i'd be delighted to be able to whack a few bigger atties on top of it as you are able. I'd like it to be my all day "safer" sub-ohm vape.
T
Rob has posted that he has 10 000 parts = 5 000 low-ohm mod kits, which means 2 pieces per mod. Is it a new spring and a firing pin, or a new firing pin and non-melty button? The answer to that makes a difference to what i do to the bottom of the Reo after i face it.
So does the v-drop.
My black grand is due a rebuild kit soon anyway having been my all day vape for ages now, but i'd be delighted to be able to whack a few bigger atties on top of it as you are able. I'd like it to be my all day "safer" sub-ohm vape.
T
So for those of you all not using a Reomizer (or RM2) which one of these attys work well with the REO?
I was looking at the Chalice..but $95 is a bit rich for these vape budget hands and I see its out of stock.
The Cyclone looks really nice and at $59 is a bit more palatable.
I was looking at the Chalice..but $95 is a bit rich for these vape budget hands
and I see its out of stock.The Cyclone looks really nice and at $59 is a bit more palatable.
I'm pretty sure it's spring and pin. No buttons on the horizon.
- Status
Similar threads
