Reo compatible RBAs
- Thread starter hildicat
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic fasttech mt baker myvaporstore
- Status
I am not that handy, I don't have a drill press. and the igo L wasn't really stainless steel. Guess I am not going to get the next gen igo with all the posts. I think I am going to wait this Rob offers a drilling and a milling service. Imagine a Origin dripper on reo grand. The reomizer is amazing but I think there is better flavor on RBAs with more air flow.
I just drilled the igo-W. It's all stainless. Having messed up on the Nimbus post, I was a little more attentive, cleared shavings more often, took my time. Success. This straight cylindrical cap is just begging for some kin'a airhole control valve . . . . . . .
BTW; I almost didn't drill the W because I thought I might want to reserve a dripper for tasting (that doesn't drain back into the juice reserve). Then I realized; alls ya' gotta do is slide a little silicone sleeve down onto the center post, and that juice stays put in the atty.
BTW; I almost didn't drill the W because I thought I might want to reserve a dripper for tasting (that doesn't drain back into the juice reserve). Then I realized; alls ya' gotta do is slide a little silicone sleeve down onto the center post, and that juice stays put in the atty.
Vicious Ant Cyclone with AFC (air flow control) cap:
The Cyclone with the regular cap will fit inside the standard catch cup of a Reo.
In order to use the AFC cap, you need a milled catch cup for the cap to go all the way on.
The Cyclone with the regular cap will fit inside the standard catch cup of a Reo.
In order to use the AFC cap, you need a milled catch cup for the cap to go all the way on.
Not sure if this has been mentioned but Hornet RDA clone top caps will fit ERA 1.5 attys if you want to switch up look or have made air hole to large.Got bored and just tried and fits perfect .
Anyone ever experimented with the atomic rda? Its quite a narrow rda, i wonder if it would fit in the standard reo catch cup. I think that would be pretty cool if it fit
I dont know who is crazy enough to spend $100+ on an rda and then drill through it though....
I dont know who is crazy enough to spend $100+ on an rda and then drill through it though....
You can run anything with a 510 connector on it if you use an adaptor, even a tank if you are too lazy to squonk or just fancy a change of flavour. But my issue with doing that is that if you then drop your Reo, and i am a clumsy so-and-so, then you can do more damage to the threads if it falls badly for you.
i run a milled down Reo that means i do not have to use the adaptors and it makes for a more seamless join. Rob sells adaptors, but you will have to mod any atty that is not already a bottom fed one to use it properly.
T
i run a milled down Reo that means i do not have to use the adaptors and it makes for a more seamless join. Rob sells adaptors, but you will have to mod any atty that is not already a bottom fed one to use it properly.
T
You either need a milled catch cup or 510 to 510 unsealed adapter like this: 510-510 Adapter (Unsealed)
Usually Rob has them on his site but I couldn't find 'em this time.
I haven't ventured into RBA territory yet.
Aside from an RM2, I also need a "2nd choice" RBA that would be good for a beginner.
REO 2.1
Part of my new year's resolutions is to "venture out" into RBA territory.
For whatever reason, and I have no idea why yet, I just haven't.
Aside from an RM2, I also need a "2nd choice" RBA that would be good for a beginner.
REO 2.1
Part of my new year's resolutions is to "venture out" into RBA territory.
For whatever reason, and I have no idea why yet, I just haven't.
I haven't ventured into RBA territory yet.
Aside from an RM2, I also need a "2nd choice" RBA that would be good for a beginner.
REO 2.1
Part of my new year's resolutions is to "venture out" into RBA territory.
IN other words, I want more than 1 atty to play around with, since I am a comparision tinkerer. Although, based on my success with a REO (i.e. that there ISN'T a better vaporizer out there for me!) I guess I will feel quite secure just getting an RM2 from the same vendor.
IN other words, I want more than 1 atty to play around with, since I am a comparision tinkerer. Although, based on my success with a REO (i.e. that there ISN'T a better vaporizer out there for me!) I guess I will feel quite secure just getting an RM2 from the same vendor.
I feel secure with what Rob works on
What are some of the most popular, most reccomended attys for the reos? I plan on getting one soooon
-Sent from my DNA20 through my Kayfun Lite
-Sent from my DNA20 through my Kayfun Lite
What are some of the most popular, most reccomended attys for the reos? I plan on getting one soooon
-Sent from my DNA20 through my Kayfun Lite
Reomizer2
It's out of stock what's the shipping time for a reo anyways
-Sent from my DNA20 through my Kayfun Lite
what's the shipping time for a reo anyways-Sent from my DNA20 through my Kayfun Lite
there are 42 in stock http://www.reosmods.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=936&category_id=32&option=com_virtuemart&Itemid=3
They ship on Monday, Wednesday and Friday. Priority mail from Maine. I live in Chicago if it goes out on Wednesday I'll get Friday or Saturday. Signature is required for the Reo itself.
They ship on Monday, Wednesday and Friday. Priority mail from Maine. I live in Chicago if it goes out on Wednesday I'll get Friday or Saturday. Signature is required for the Reo itself.
Signature required I'm in the navy I'm never home lol how am I going to receive it
-Sent from my DNA20 through my Kayfun Lite
If no one can be home to sign you can wait for the slip and pick it up at the P.O. There is a cut-off date before they return it to the sender.
You can fill out and sign a slip ahead of time and leave it with your carrier.
You could order and have Robert ship it to a friend or family member that lives close. You would need to PM Robert with that request.
- Status
Similar threads
