Reuleaux RX200

[Baditude]

Just wondering which batteries do y'all recommend for this mod. Right now, Im running it with the Samsung 25r, but curious if the mxjo 3000mah or other batteries would last longer?

I was just recently gifted an RX200. I chose to put three LG HG2 3000mah 20 amp batteries in mine.

I'm using a Crown tank with 0.25 ohm coils and never vape higher than 30 watts. I charged the batteries upon delivery and they have been going strong, still on their third day of use.

 

[Dipper926]

Seeing as how this pertains to the RX 200, I've been seeing a lot of mentioning of a band under the firing button, and YouTube videos on how to fix it, how prevalent this is, is my question? Why does it need to be fixed, is it even important, and how soon? How to tell if needed to be fixed without voiding warranty? I have this device have had no problems, but would like to know how to tell if I am going to later

Sent from my SM-T800 using Tapatalk

 

[Dipper926]

I was just recently gifted an RX200. I chose to put three LG HG2 3000mah 20 amp batteries in mine.

I'm using a Crown tank with 0.25 ohm coils and never vape higher than 30 watts. I charged the batteries upon delivery and they have been going strong, still on their third day of use.

I'm actually using the HE4s, which are 2500 milliamp, and I've noticed that they last significantly longer at 80 to 100 Watts than a sigelei Fuchai , so the extra battery has to be worth something.

Sent from my SM-T800 using Tapatalk

 

[KenD]

Seeing as how this pertains to the RX 200, I've been seeing a lot of mentioning of a band under the firing button, and YouTube videos on how to fix it, how prevalent this is, is my question? Why does it need to be fixed, is it even important, and how soon? How to tell if needed to be fixed without voiding warranty? I have this device have had no problems, but would like to know how to tell if I am going to later

Sent from my SM-T800 using Tapatalk

The screen ribbon problem was with the Reuleaux DNA 200, not the rx200, and I seem to recall that it's been fixed in later batches. I haven't checked if mine has the problem.

Sent from my M7_PLUS using Tapatalk

 

[BillW50]

I'm using a Crown tank with 0.25 ohm coils and never vape higher than 30 watts.

Are you a MTL (mouth to lung) vapor? As I can't ever see a lung vapor getting any satisfaction with a Crown 0.25 ohm at 30 watts.

 

[Baditude]

Are you a MTL (mouth to lung) vapor? As I can't ever see a lung vapor getting any satisfaction with a Crown 0.25 ohm at 30 watts.

I was a MTL vaper for years, and recently converted to being a direct lung vaper. I shelved my beloved Kayfun Lite Plus RTA because the draw was too tight.

I'm not sure what your point about the Crown is. I'm using factory made coils, not homemade coils with the RTA accessory. I've read that the RTA accessory has a tighter draw than the factory-made tank, so I'll probably never get it.

 

[KLR650Tagg]

vape NW has the black/red in stock now, so i ordered one.

 

[BillW50]

The screen ribbon problem was with the Reuleaux DNA 200, not the rx200, and I seem to recall that it's been fixed in later batches. I haven't checked if mine has the problem.

When you run EScribe and click that button that says Get Information (EScribe can get information online about your mod), what does yours say? I bought my two like a week apart from two totally different places. And both of them were programmed on January 25, 2016. One in the AM and the other in the PM. No I didn't check mine either, but screens are only $12 anyway.

 

[BillW50]

I was a MTL vaper for years, and recently converted to being a direct lung vaper. I shelved my beloved Kayfun Lite Plus RTA because the draw was too tight.

I'm not sure what your point about the Crown is. I'm using factory made coils, not homemade coils with the RTA accessory. I've read that the RTA accessory has a tighter draw than the factory-made tank, so I'll probably never get it.

I never heard of a lung vaper using Crown 0.25 ohm coils down to 30 watts. Everyone I know needs at least 50 watts and up. While Robbie Vapes vaped his at 160 watts.

 

[inspects]

I use the .25 coils at 35-40 watts, works perfectly for me...like Baditude said, the batteries last for about three days.

The coils last forever, get my nic fix, all is well.

 

[BillW50]

I use the .25 coils at 35-40 watts, works perfectly for me...like Baditude said, the batteries last for about three days.

Yes my two RX200 and my two Reuleaux DNA200 does last 3 days too before recharging (between 700 to 1400 puffs). But I am mostly MTL vaping at 10 watts (I calculated a DNA200 is only about 60% efficient at this wattage). I do lung hit sometimes, but even for me, 30 watts is too low on the Crown with 0.25 coils.

 

[inspects]

I start the coil at 30 watts, it's surely vapable, but I'm not into high wattage vaping with the crown coils. Seldom do I go over 40 watts. I like the coils to last, when the flavor deteriorates I change the coil, and I've never had a coil burn on me.

As long as I'm getting decent vapor and great flavor it all good.

I tried the coils at 100 watt+, using 100% vg they won't last long, nor keep up with the juice without getting a half-dry hit.

 

[BillW50]

I'm using factory made coils, not homemade coils with the RTA accessory. I've read that the RTA accessory has a tighter draw than the factory-made tank, so I'll probably never get it.

Yeah it is probably true with airflow and the RBA. I never noticed that much of a difference really. And I don't vape from stock coils too often because with many manufactures, the coils vape differently from batch to batch. But when I build my own, they are perfect every time.

 

[BillW50]

I start the coil at 30 watts, it's surely vapable, but I'm not into high wattage vaping with the crown coils. Seldom do I go over 40 watts. I like the coils to last, when the flavor deteriorates I change the coil, and I've never had a coil burn on me.

As long as I'm getting decent vapor and great flavor it all good.

I tried the coils at 100 watt+, using 100% vg they won't last long, nor keep up with the juice without getting a half-dry hit.

Yes I bet. I just counted what I am vaping on my shelf. I have ten mods there and ten rebuildables out right now. And I don't think I rebuild more than two of them a month. Even the ones I vape on most of the time, lasts 4 to 6 weeks easy.

 

[inspects]

Yes I bet. I just counted what I am vaping on my shelf. I have ten mods there and ten rebuildables out right now. And I don't think I rebuild more than two of them a month. Even the ones I vape on most of the time, lasts 4 to 6 weeks easy.

I use squonkers 99% of the time. The Crown has been the best tank I've purchased so far out of about 30 different. I'm sure there is better, but I'm satisfied. My next experiment will be some RDTA's.