Two things, Ash:
1) Congrats on the new family member!
2) You will have to pry my Katana out of my cold dead hand...
- Status
1) Congrats on the new family member!
2) You will have to pry my Katana out of my cold dead hand...
loooooooooooooool OMG no man it's fine lol you can keep it
but how do you fined it ?
Can't you tell? I LOVE it! It is a hard beast to tame for a first time geni user, but I got it going very nicely now. Posts and wick positioning are just SO close together.loooooooooooooool OMG no man it's fine lol you can keep it
That what I want to hear it worse the price am planing to save 300 to 350 and get Katana V3. or Limted Edation
Thats what I paid - I think its worth it - especially as they are not made anymore.
hi gang,
i was fortunate enoguh to grab a defcon mini on the classifieds. just ran one tank thru it and I am not seeing anywhere to refill the tank akin to other 'line' style genesis attys. the wick hole is very small so I cannot get my plunger into there with the wick installed, and because the wick hole is so small I can not fit the syringe plunger into the wick itself. how do you refill this thing?
any updates or pics on the atom?
thanks,
patch
i was fortunate enoguh to grab a defcon mini on the classifieds. just ran one tank thru it and I am not seeing anywhere to refill the tank akin to other 'line' style genesis attys. the wick hole is very small so I cannot get my plunger into there with the wick installed, and because the wick hole is so small I can not fit the syringe plunger into the wick itself. how do you refill this thing?
any updates or pics on the atom?
thanks,
patch
I have a fairly quick fix for the condensation leaking down the sleeve. Chopper told me to send it in and he would update my DC to fix the condensation problem. This thing is just too damn good to give up for any amount of time and chopper is really busy so I came up with a really easy fix. Remove the top then pull the sleeve off of the tank (carefully). Clean everything up good then wrap the top 1/4" or so of the tank with teflon tape (used for plumbing). Much more than 1/4" will show in the window cut outs. Liberally lubricate the sleeve and tank with some spit (or other lubricant) then slowly slide the sleeve back over the tank with a gentle twisting motion. Next, wash off spit unless you like that sort of thing. To test, cover the air hole and trying blowing into the drip tip. If you did this correctly, it will be air tight. Unlike the way it was before. It only took about 2 wraps for mine. There's a fine line between having wrapped too many times and not enough. I've been using mine like this since last night and it works perfectly.
I have successfully stalked down the mail carrier and Atoms are in hand and I got one filled and on the ProVari now. It is good - really good. I do find the draw extremely tight, but I can fix that later. Vapor production is nice (as well as flavor). I will post pics up later.
A lot of people don't like the draw that comes from the same size air hole as I put on yours.They say its too airy but I love the draw that size hole gives off.Let me know how they work for you later.
*UPDATE*
I have drilled out my Atom top cap to 1/16 and am now officially in love! I would like to stress that no one should do this on my say so - the light, airy, easy draw that this size air hole produces is right for ME. It does not mean that anyone else should do it. I have prior experience on another genisis type mod where I did the exact same thing. I will have my wife try hers and then mine to see which she prefers when she comes home.
*UPDATE*
Surprise, surprise! Hers was already 1/16. Strange that they both had different size intake holes. But everyone is happy! You da man, Chopper!
I have drilled out my Atom top cap to 1/16 and am now officially in love! I would like to stress that no one should do this on my say so - the light, airy, easy draw that this size air hole produces is right for ME. It does not mean that anyone else should do it. I have prior experience on another genisis type mod where I did the exact same thing. I will have my wife try hers and then mine to see which she prefers when she comes home.
*UPDATE*
Surprise, surprise! Hers was already 1/16. Strange that they both had different size intake holes. But everyone is happy!
You da man, Chopper!
Last edited:
*UPDATE*
I have drilled out my Atom top cap to 1/16 and am now officially in love! I would like to stress that no one should do this on my say so - the light, airy, easy draw that this size air hole produces is right for ME. It does not mean that anyone else should do it. I have prior experience on another genisis type mod where I did the exact same thing. I will have my wife try hers and then mine to see which she prefers when she comes home.
*UPDATE*
Surprise, surprise! Hers was already 1/16. Strange that they both had different size intake holes. But everyone is happy!
It's because I drilled one at a 3/64 which is the one you had to drill to a 1/16 and the other one was drilled at the 1/16 because my 3/64 broke.
*UPDATE*
I have drilled out my Atom top cap to 1/16 and am now officially in love! I would like to stress that no one should do this on my say so - the light, airy, easy draw that this size air hole produces is right for ME. It does not mean that anyone else should do it. I have prior experience on another genisis type mod where I did the exact same thing. I will have my wife try hers and then mine to see which she prefers when she comes home.
*UPDATE*
Surprise, surprise! Hers was already 1/16. Strange that they both had different size intake holes. But everyone is happy!
Now you can go show yours off here http://www.e-cigarette-forum.com/forum/new-members-forum/225727-pictures-your-setup.html if you wanted lol.I can't show any of them there as they think I'm advertising when it would only be my personal one.
Hey Chopper,
I PM'ed you a few days ago. Haven't heard back.
Don't know if you got it or not.
Thanks
I PM'ed you a few days ago. Haven't heard back.
Don't know if you got it or not.
Thanks
That's the type of question that should be asked in a PM.
- Status
