S&S MODS Home of the DEFCON MINI RE-BUILDABLE ATTY

[mace bewley]

Last check my mini departed Sandston, VA yesterday...so hopefully sometime this week I will have it. Thank you for the great guide. I can't wait.

Jealous! My two DC's show no movement at all.

Sent from my DROIDX using Tapatalk 2

 

[suzannep]

Jealous! My two DC's show no movement at all.

Sent from my DROIDX using Tapatalk 2

I really don't understand the tracking system that the postal services use anyway...i have one item that says that it hasn't moved a bit, but i just got it here today and am using it....hopefully the tracking of yours is doing the same and just not showing updated online

 

[Chopper71]

Jealous! My two DC's show no movement at all.

Sent from my DROIDX using Tapatalk 2

I just checked it and I get the same thing.Matter of fact a few are showing that.I have no clue maybe they didn't get scanned?Its been shipped though.

 

[Chopper71]

If you are getting a leak and do not want to send it back here is a fast fix that works.If you have old drip tips that you don't use.Take the small o ring off it and carefully pull out the juice tube and replace the skimpy white o ring that is on the base connector with it.You have have to force your tube back on the connector but it won't leak after you do that.Thanks to sj74 for this tip he sent me in a email.It was something I never thought of.Only do this if you are comfortable in doing so.

Also any orders that get shipped out the next few days will not have an extra mesh in it.I'm almost out and I'm waiting for a supply order to get here.

 

[tiburonfirst]

I just checked it and I get the same thing.Matter of fact a few are showing that.I have no clue maybe they didn't get scanned?Its been shipped though.

happens quite often with usps - the only time you need to worry is when it shows delivered and it's not in your box. then it's time to call your po immediately and make a ruckus .....

 

[mace bewley]

I really don't understand the tracking system that the postal services use anyway...i have one item that says that it hasn't moved a bit, but i just got it here today and am using it....hopefully the tracking of yours is doing the same and just not showing updated online

I just checked it and I get the same thing.Matter of fact a few are showing that.I have no clue maybe they didn't get scanned?Its been shipped though.

Thats what i was thinking, but it don't help my OCD none!!! You would think after 3+ years of vaping i would be used to it by now....

Sent from my DROIDX using Tapatalk 2

 

[Green Mtn Vpr]

Thanks to all for the manual and getting it posted...read it... saved it... now all I need is my shiny new DC!

Build Chop, build!

 

[Dozent]

it needs to be cleaned or change Stainless Steel Mesh?

 

[overall]

Mine arrived today.

I was all geared up to make some wicks ......So I made 5

I found a great use for empty blood tubes. I put my spare wicks in with a bit of PG and wrapped the kanthal around the inner rim of the stopper. I used the label so I know what wick goes to what device.
It is great to be a nurse sometimes.
My provari didn't like the wick it arrived with .....sorry chopper, but my trusty Altoids mod will vape anything for me.

While we are at it I want to talk a little bit about dreaded word leaks. I bought a Janty Neo some time back in March. The Neo uses a puromizer to hold the juice. The puromizer tank is extremely similar to the tank on the DC. And just like the Neo puromizer the DC leaked right after filling. However once I vaped for a couple of minuted the leak stopped ....just like the Neo. The leak is most likely related to the pressure caused by filling.

Hope all these images upload.

 

[overall]

Mine arrived today.

I was all geared up to make some wicks ......So I made 5

I found a great use for empty blood tubes. I put my spare wicks in with a bit of PG and wrapped the kanthal around the inner rim of the stopper. I used the label so I know what wick goes to what device.
It is great to be a nurse sometimes.
My provari didn't like the wick it arrived with .....sorry chopper, but my trusty Altoids mod will vape anything for me.

While we are at it I want to talk a little bit about dreaded word leaks. I bought a Janty Neo some time back in March. The Neo uses a puromizer to hold the juice. The puromizer tank is extremely similar to the tank on the DC. And just like the Neo puromizer the DC leaked right after filling. However once I vaped for a couple of minuted the leak stopped ....just like the Neo. The leak is most likely related to the pressure caused by filling.

Hope all these images upload.

 

[MegaT4ever]

Cant wait till mines in the mail

 

[ED-209]

Also any orders that get shipped out the next few days will not have an extra mesh in it.I'm almost out and I'm waiting for a supply order to get here.

If it helps, no need for extra mesh or even a pre-made coil on mine unless you do that to test it; I got soooooo much wire and mesh I should be set for at least about 75 wick attempts and hoping I'll have better luck with this than the G-Tank I had.

No rush but figured I'd throw that out there if that helps out some

Thanks

 

[Dozent]

it needs to be cleaned or change Stainless Steel Mesh after use?

 

[Chopper71]

it needs to be cleaned or change Stainless Steel Mesh after use?

You can find help here............. http://www.e-cigarette-forum.com/fo...mods-support-thread-all-things-chopper71.html

 

[Chopper71]

Mine arrived today.

I was all geared up to make some wicks ......So I made 5

I found a great use for empty blood tubes. I put my spare wicks in with a bit of PG and wrapped the kanthal around the inner rim of the stopper. I used the label so I know what wick goes to what device.
It is great to be a nurse sometimes.
My provari didn't like the wick it arrived with .....sorry chopper, but my trusty Altoids mod will vape anything for me.

While we are at it I want to talk a little bit about dreaded word leaks. I bought a Janty Neo some time back in March. The Neo uses a puromizer to hold the juice. The puromizer tank is extremely similar to the tank on the DC. And just like the Neo puromizer the DC leaked right after filling. However once I vaped for a couple of minuted the leak stopped ....just like the Neo. The leak is most likely related to the pressure caused by filling.

Hope all these images upload.

Sometimes I don't like my own wicks lol.

 

[Chopper71]

Mine arrived today.

I was all geared up to make some wicks ......So I made 5

I found a great use for empty blood tubes. I put my spare wicks in with a bit of PG and wrapped the kanthal around the inner rim of the stopper. I used the label so I know what wick goes to what device.
It is great to be a nurse sometimes.
My provari didn't like the wick it arrived with .....sorry chopper, but my trusty Altoids mod will vape anything for me.

While we are at it I want to talk a little bit about dreaded word leaks. I bought a Janty Neo some time back in March. The Neo uses a puromizer to hold the juice. The puromizer tank is extremely similar to the tank on the DC. And just like the Neo puromizer the DC leaked right after filling. However once I vaped for a couple of minuted the leak stopped ....just like the Neo. The leak is most likely related to the pressure caused by filling.

Hope all these images upload.

I don't see any images?

 

[Chopper71]

Hi everyone S&S Mods is now open for business.I'm starting this very small and hope to have it grow with more mods and things.Right now I'm just selling my version of a rebuild able atty named the DEFCON MINI.I'm sure some have seen the similar ones floating around.Mine are all hand made at my home by myself.These are made to order,so when you order one and pay I will then make it and ship when its complete.These are very nice units and work very well.They are made of Stainless Steel and I use .999 pure sterling silver for the electrodes along with mesh #400 and Kanthal 32 awg Resistance Heating Wire.The DefCon can hold approximately 1.8 to 2ml of liquid and has been tested for leaks with no evidence of any.Right now I have two different types,Black and Stainless.It will come to you fully ready to use just add juice and vape.

I'm currently working on something I call the DEFCON Atom which I hope will make it through all the testing.

Price for the DEFCON MINI is $55 shipping included in price.ALL international shipping orders will be a total cost of $71.95 for Priority flat rate box.That is the cheapest I can find.Buyer pays PP fees and comes with one pre installed oxidized wick pre wrapped using the 3/4 method,some Kanthal wire 32 awg.I only can accept PayPal right now with no mention of Ecig related stuff.I will offer a 10 day money back
guarantee or a replacement if anything should happen to the DEFCON MINI as a result of the way its built.Orders are to be taken by PM only and please use the word DEFCON in the subject box.Also include your ECF user name without using the word ECF in it and color choice and first and last name and address .It's my wish to make you all a low cost rebuild able atty that works very well and looks nice to boot.If I have left anything out please inform me and I will fix it.Thank you and take care.

Update for International shipping....I can go with First Class international shipping for cheaper then the $16.95 for the Priority International flat rate box.That is if buyer does not mind the extra time it will take to get from me to buyer once the Postal Office has it.

Air holes are going back on the top cap.

 

[otrem]

NICE JOB CHOPPER. now you're completely healed i guess/hope.

 

[tiburonfirst]

chopper, there have been quite a few questions on how to refill once the wick is in place. ash just asked on prevets.
any way to post a pic showing the best method for a straw wick?

 

[*ASH*]

And yah I've just got mine today and can't wait to try it when am home . It's just I want to know how to fill it with out remove the mesh and kanthel from it ?