Yes to all that has been said about the keeppowers. If you want to go that low with that much power and current take a look at LiPOs.
Seven 30
- Thread starter 350ZMO
- Start date
- th_trl_thread_readers 0
-
- Tags
- big fogger seven 30 seven-30
- Status
Thanks for the tip. I hope this works also for the Seven-22 so I can upgrade it in the future. But I don't quite get what o-ring you mean? Does the seven-30 have a rubber o ring? I really don't quite get where to put a screwdriver to. There seems to be a very thin sheet of metal ring on the top. Maybe it's just different on a Seven-22...
I really love form factor of the Seven-22 (like the closed form better than the open slits)
Post a close up of the top of your mod. It may be different than ours, when I get home from dinner I'll post one of mine showing it.
Sent from my HTC One
E. H. Pro Big Buddha on Seven 30
Lookin good! My juice is almost gone though....I think I kill a tank a day...
I go through about 20mL a day minimum, so don't feel too bad.View attachment 363927
Lookin good! My juice is almost gone though....I think I kill a tank a day...
Sent from my SM-P600
Hahaha...I think I could do that too. Messing with the mech and a dripper seems to cut it down so I don't keep draining the big buddha's tank, heh.
I can only imagine the battery drainage if I was using 18650s...
Last edited:
I actually don't know how much liquid I use a day because I rotate this guys and then some:
And now I added this gut to the bunch: 19 Ml Wolverine (Russian 91% Mega Clone)
What's next?
Maybe this guy:
How is the Wolverine (31mm!)? Design looks interesting....you like it more than the Big Buddha (capacity aside)?
The 31mm Wolverine's stock Airflow design didn't work well for me. I tried to build and re-build it "seven ways to Sunday" wasting half of spool of 26 Gauge and tons of Rayon wicks. The Vapor production was not that great and the flavor was a little muted, and the throat hit was a little too much. Like when you put your Dripper top cap and don't align airholes with your coils. So, I knew that I'm having an Airflow problem.
Then I gave up trying to make their Airflow design to work and made my own Airflow holes, much like it is made in a Fogger and Aqua.
So I drilled two new Airholes (one on each side) and sealed the old ones:
It made a World of difference! I've got a full flavor now and clouds of vapor much like I get from Big Buddha or Big Fogger.
I have it setup with 0.45 Ohms of 26 Gauge Kanthal and Rayon:
The advantages over Big Buddha that I see are:
1. Top tool-less filling.
2. Protective Stainless Steel sleeve around the Glass tank.
3. Almost twice the liquid capacity.
Disadvantages:
1. Bad Airflow design (IMHO)
2. Press Fit (to SS Center Pin) Brass Positive Terminal rather than Threaded.
3. It is so dam huge and heavy!
But, after drilling my own Airflow holes, I'm very satisfied with it. I'm going to make me a new Stainless Steel Positive Terminal that threads onto the Center Pin.
It looks perfect on my 26650 King Mod. Everything matches: The size, the color and the finish texture:
And, like I said: It is huge:
Seven-30 with top cap.
Seven-30 without top cap. Note the O-ring that holds the top cap on.
Seven-30 without the O-ring. That's where you wedge the screwdriver to remove the top.
Good luck.
Sent from my HTC One
Thank you for the pictures. The Seven-22 definitely looks different. I'll try to upload some pictures.
More on batteries...check out the Panasonic CGR 50amp 26650. Supposedly 50A...but the rating also seems to be a "max" rating...
So, after several solder burns, a shorted battery, a couple razor cuts, 2 burnt spots on my carpet, and 4 bandages, I've finally 350d my Seven-30. And it was all worth it.
Sent from my HTC One
Sent from my HTC One
Panasonic 26650 Li-ion 3.6V 50A 2650mAh CGR26650A Battery
MNKE 26650 3500mah 60A IMR and now 4000 mAH
Purple EFEST IMR 26650 32A / 64A Li-MN Battery 3500 mah
Sony 26650 50A IMR Battery 2600 mAH
VAPPOWER IMR26650 3.7V 4200mAh Rechargeable Li-Ion Batteries 40A
A123 ANR26650M1A 3.2V 2300mAh Rechargeable LiFePO Batteries 70A
So they say...
Do you Vape at that power?
Me? I Vape at 40 - 50 Watts the most and that is only 11 - 13 Amps, so I would go for the most longevity translated in mAH
MNKE 26650 3500mah 60A IMR and now 4000 mAH
Purple EFEST IMR 26650 32A / 64A Li-MN Battery 3500 mah
Sony 26650 50A IMR Battery 2600 mAH
VAPPOWER IMR26650 3.7V 4200mAh Rechargeable Li-Ion Batteries 40A
A123 ANR26650M1A 3.2V 2300mAh Rechargeable LiFePO Batteries 70A
So they say...
Do you Vape at that power?
Me? I Vape at 40 - 50 Watts the most and that is only 11 - 13 Amps, so I would go for the most longevity translated in mAH
Last edited:
Those Vappowers are supposed to be good. My SX350 doesn't like my MNKEs very much, so I'm gonna pick one of them up, along with one of those Keeppower batteries, see if either of them fare better.
Sent from my HTC One
Sent from my HTC One
I took a grinder to mine, left about 3 mm. It screws on fine without having to flip it. If you haven't come up with something else yet, you could try that. Heads up though, grinding it makes a mess of metal powder. Clean it off afterwards or your threads may bind up.
Sent from my HTC One
My stock Seven30 is still working just fine after more than a month of constant chain vaping, but I vape at 15-18 watts on a 1.0-1.3 ohm coil......wonder if mine will stand the test of time?
Yeah I posted a kidney puncher review on most of those...I still think the MNKEs (both variants) are the best bet overall (price is also a factor here), but some higher mah, lower amp versions should be better for VW devices.
I'm going on 3 weeks of chain vaping @.8 ohm/30 watts. I hope mine holds up too.
- Status
