Sigelei Mechnical Mods
- Thread starter pillowking
- Start date
- th_trl_thread_readers 0
- Status
How big is the positive pin in the 20?
With the rsst you can shave some off the bottom of the connector and just run the pin up higher if the 20 positive pin didn't hit the outside of the rsst connector
With the rsst you can shave some off the bottom of the connector and just run the pin up higher if the 20 positive pin didn't hit the outside of the rsst connector
Last edited:
Mine is 200.906
How did you do that bud
I shaved the delrin housing down a few mm at the top. Shaved the positive pin down on the side that rests inside the copper spring to make up for the lost height of the delrin housing. Used a donut spacer where I shaved the delrin down to keep everything in place. I did all these measurements for the rsst, so it wont be flush for all attys. The fact that the rsst has an adjustable pin helps.
A simpler method would be to shave the rsst down to desired height.
On a side note: I dropped the button spring and spent an hour trying to find it.
Last edited:
That's probably how long it took me to get the button assembly out.
It does look purty once it's all polished up though.
The height of the part of the positive pin that touches the atty is tiny. Not much to work with. I was hoping it was longer.
There is no way im going to be able to fit a dna 20 in there unless I settle for an 18350 replaceable battery. Too little mah and c rating for my tastes. If I keep the tube extended to the max, I could do a 900mah lipo, but probably wont. Would be a shame to destroy the 20.
That's probably how long it took me to get the button assembly out.
It does look purty once it's all polished up though.
Picture! 10char
LOL, you guys are already modding/polishing and I just got the hot spring in and tested it...I will be in the back of the class for awhile longer.
EDIT: The fire button keeps spinning into the locked position. I have to spin it back to unlock it...
EDIT: The fire button keeps spinning into the locked position. I have to spin it back to unlock it...
Last edited:
lol....at least you have one and didn't fail ordering so now your waiting...but I'm enjoying my latest toy immensely so I can handle a few days....besides this gives everyone else the chance to get it all figured out
I am probably going to remove that pesky locking crap asap. After I devise a better switch setup than this stock spring stuff. Not liking that at all. Way to easy for a accidental fire. Use a vape-safe fuse if you have them folks. We don't need any accidents.
I did put a 2Cent fuse in. I will expect a photo-tutorial for the class dummy when you fix the switch
Got it filled up and up and running. Hits great!! Hot springs should be coming soon and cant wait to try the difference
I did put a 2Cent fuse in. I will expect a photo-tutorial for the class dummy when you fix the switch
Well, I've already ditched the locking switch. That had to go! Now to figure out a little better switch altogether. I may just see about getting a roller switch ...'y. It would make this really shine I think.
Just in case anyone is having a hard time finding this mod... KidneyPuncher has the #20 for preorder.
Done with one. Just like bmay said, the switch design is a accident waiting to happen. I may sell my 3 20's.
wow this thread is for the hot-rodders of vaping for sure; lots and lots of vape porn...
- Status
Similar threads
