Silverplay Nano RTA

[ThunderDan]

Seems like going back to the initial Goblin launch there were direct comparisons made to the Silverplay. Well now vapordna / PROJECT SUB-OHM® has their answer to the Goblin Mini getting ready to launch, the Silverplay Nano.

Project Sub-Ohm SilverPlay Nano RTA Rebuildable Tank Atomizer

Looks nice, costs a bit more than the GM, but does give you a bell cap included. The SP Nano is 33mm tall vs 28mm tall on the GM, but SP Nano vs GM w/ 510 DT adapter would probably seem rather negligible in height. Bottom fill looks like it will be easier to use the glass bottle dropper style bottles if that was an issue for you on the GM mini. Doesn't look like there is AFC, so this is most like a lung hitter only type rta.

 

[MattyTny]

Looks like a nice little rta. Definitely comparable to the Goblin mini. It has a very "clean" look to it in my opinion. Interested in seeing a review.

 

[drippaboi]

I hope they beveled out the edges a little from the v2 ... I was always using gloves to thread/unthread the base from the tank cuz the edges were sharp enough to slice fingers ...

 

[slightlystoop]

Same with the zephyrus I need paper towel or will cut my fingers open, I do like the look of this tank ! Although I do like being able to adjust air flow so I'm not sure about it

 

[Two_Bears]

Same with the zephyrus I need paper towel or will cut my fingers open, I do like the look of this tank ! Although I do like being able to adjust air flow so I'm not sure about it

I have not looked at the silver play Nano; but here is what I saw on A Mime Vapes vid.

He took a standard Silver play deck and the barrel then screwed the Nano Kayfun chimney into the barrel then put a Kayfun Bell cap on it and it worked!

My left hand is messed up from Dupodrens contracture and trapping leads under screw heads are a PITA so I bought a silver play from fasttech and will try that experiment.

 

[siktirgit]

Got my nano in today, first impression is that build quality is there really solid, compared to goblin mini it is maybe a bit taller, that may be due to the height of the base. Anyways the tank itself is easier to put together after the build, chimney is one piece design, and I used the bell tank without any problem and filling is easy. My only thumbs down would be the mouth piece, its too short, I replaced it with a different mouth piece. Overall I give it thumbs up for material and vape experience. I would put this rta up there along with goblin mini

 

[siktirgit]

I apologise for the quality of the pics, this should give an idea for those looking to buy the Nano

 

[siktirgit]

Here is a 3 way size comparison; From left to right Erlkonigin Nano,Silverplay Nano and Goblin Mini

 

[Two_Bears]

I hope they beveled out the edges a little from the v2 ... I was always using gloves to thread/unthread the base from the tank cuz the edges were sharp enough to slice fingers ...

Boy I know the feeling. I had to remove the Silverplay band and the AFC and that bottom was sharp.

I faked a sp Nano with Kayfun Nano chimney and bell cap. It worked. Liked the airflow but the flavor was mediocre.

 

[Two_Bears]

Here is a 3 way size comparison; From left to right Erlkonigin Nano,Silverplay Nano and Goblin Mini

Which has the best flavor of the three in the photo?

 

[siktirgit]

Which has the best flavor of the three in the photo?

As far as the flavor goes you can't go wrong with any of them. Erlkonigin is single coil rta it is good but is a cooler vape and flavour is there, so every now and then I find myself going back to it. Flavour wise between the other two its kinda difficult, I would say they are very close. Goblin Mini would be 1st place finisher with Silverplay nano coming very very close second. But for me overall award would go to Silverplay nano, building the tank is faster and easier, you get a bell cap. Only thumbs down for Silverplay nano would be no airflow control and the short mouth piece.

 

[Two_Bears]

As far as the flavor goes you can't go wrong with any of them. Erlkonigin is single coil rta it is good but is a cooler vape and flavour is there, so every now and then I find myself going back to it. Flavour wise between the other two its kinda difficult, I would say they are very close. Goblin Mini would be 1st place finisher with Silverplay nano coming very very close second. But for me overall award would go to Silverplay nano, building the tank is faster and easier, you get a bell cap. Only thumbs down for Silverplay nano would be no airflow control and the short mouth piece.

I prefer a single coil. I use the plug in the GMini and use the KFL+ W BELL CAP.

 

[siktirgit]

I prefer a single coil. I use the plug in the GMini and use the KFL+ W BELL CAP.

The option for single coil is a plus on Gmini and adjustable airflow is another plus.Would have been even better if the chimney was a one piece design like Silvernano, think its doable for v2 maybe.Same goes for silverplay nano they need a v2 with a airflow control of some sort built into it. For a single coil build Erlk nano is my go to atty, works every time I can probably build it blindfolded + I get a cooler vape I enjoy that every now and then.

 

[Two_Bears]

The option for single coil is a plus on Gmini and adjustable airflow is another plus.Would have been even better if the chimney was a one piece design like Silvernano, think its doable for v2 maybe.Same goes for silverplay nano they need a v2 with a airflow control of some sort built into it. For a single coil build Erlk nano is my go to atty, works every time I can probably build it blindfolded + I get a cooler vape I enjoy that every now and then.

I think a one piece chimney is a mistake. I like to see the coil heat up with the barrel around it so I can see if the coil is touching the barrel.

 

[ThunderDan]

I think a one piece chimney is a mistake. I like to see the coil heat up with the barrel around it so I can see if the coil is touching the barrel.

The one piece chimney would be nice to do topfill though. Would probably make it a lot easier than the Gmini.

 

[sacullen]

I think a one piece chimney is a mistake. I like to see the coil heat up with the barrel around it so I can see if the coil is touching the barrel.

Wouldn't your ohm meter tell you that?

 

[siktirgit]

I do 3mm builds on both Gmini and Silverplay nano with no issues from day one. Its not a tight fit either, yes there is a risk of touching the chimney wall but once you get the hang of it even 3mm build fits in nicely, but mostly 2.5mm builds are recommended and easier to work with

 

[sahsah]

Here is a 3 way size comparison; From left to right Erlkonigin Nano,Silverplay Nano and Goblin Mini

Which has a bigger deck and is easier to build on, the goblin mini or the silverplay nano?

 

[Two_Bears]

The Silverplay may have a bit more room than the Goblin Mini.

The posts and screws are virtually identical.

 

[siktirgit]

Which has a bigger deck and is easier to build on, the goblin mini or the silverplay nano?

I don't have the exact measurements, I would say same size deck on both. I will post side by side base pictures when I can so that you can get a rough idea. Build wise I can't really say one is easier than the other, but once you get the hang of it, it is easy on both.