Slightly brown cotton close to heating wire

[eddykoodoo]

you did happen to notice, you ignored the ones I suggested yet again? this is why people are frustrated with you.. we suggest something, you ask us about something else... wbhy don't you look up reviews on youtube...

Maybe i'm not good to explain me well when i talk about to much vapor...

Trying to explain you better for your understanding:

You for sure remember when we started vape with old devices 36 mg was strong 18 mg was medium an 9 mg was light nicotine intake...

You can be agree on that?

Few days ago i tried a subohm kit with just 4mg of nicotine and i was close to vomit with light head and the strongest hit i ever tried on a Ecig...

I'm using Justfog Q16 1.6 ohm at the lowest voltage 3.4 volt wich is the lowest wattage for this device...
And even if is considered a very soft vaping from subohm users for me with my 9mg liquid is too strong nicotine intake each draw.

So i have 2 options:

1)Lower the nicotine of the liquid cut by hal lets say at 4.5 mg i already tried and is much better but than i finish the liquid very fast and always finish with a discharged battery...

2)Do short draw as i'm doing right now but is not a nice style of vaping always being careful to not exceed and get to much nicotine each draw...

3)Looking for a less powerful device work well but consume a lot less liquid so i would be fine with 9mg nicotine...


Basically i would kill for a 2.2 ohms coils 3.7 volt costant battery but with Pyrex and Cotton...

 

[Cheallaigh]

and you got off on another tangent again...

I suggested several devices capable of 80%+ VG, that can use 1.2 to 1.8 ohm coils, which are NOT subohm.. and you ignore them again. did you even look at them? I told you before, you will probably need to compromise.

 

[eddykoodoo]

and you got off on another tangent again...

I suggested several devices capable of 80%+ VG, that can use 1.2 to 1.8 ohm coils, which are NOT subohm.. and you ignore them again. did you even look at them? I told you before, you will probably need to compromise.

Ok ok i understand...

I'm not interested in 1.2 ohm but YES i'm interested in 1.8 ohm coil can you show me directly the coil you are talking about could be much easyer this way starting from the coil insted of the atomizer...

 

[englishmick]

Crappy kit?

I bought also Nautilus Mini which is most recommended hardware for MTL around the forums by far...
But i'm very unlucky i NEED to vape WITHOUT PG cause i'm ALLERGIC so the
only option i have is a stupid combo VG+H2O and seems all the atomizer are not able to handle VG ONLY liquids cause they are TOO THICK...
Nautilus is just terrible with my liquid always gurgling/dry hit/splitting liquid on my tongue...
Is not very easy for me to find an hardware
satisfy me cause you must know all new device are DTL SUBOHM device you need 5 times the battery size and consume liquid very fast...

I'm looking for something i can do long tight draws MTL without generating MONSTER
CLOUDS and consume tons of liquid...

The only kit i found may have this style of vaping is the OLD CRAPPY EVOD with plastic tank and silica wick

And all of you suggested me PYREX and COTTON so i'm looking for something with this priority...

But honestly i need to find something below 8 watt to consume little amount of liquid with MTL and is very hard...

MOST OF YOU are PRO VAPERS and loves HUGE CLOUDS with HIGH WATTAGE so is hard for me to follow your suggestions...
Even at 7.2 WATTS with my justfog Q16 which is the only hardware despite the brown cotton seems the only one can handle my vg liquid without gurgling or dry hits produce to much vapor and i need to do short draws...

Cotton and Pyrex are priority cause i changed my Ovale Elips C cause i had to many bronchits so would like trying staying away from plastic and silica with my new hardware...
How can i follow the suggestion of an Evod with both the cons?
Or a miniprotank work only with silica?

If you can suggest me an hardware use cotton heads with pyrex working at a low wattage can handl pretty well high VG liquid without gurgling splitting and dry hits design for MTL i would follow your suggestions without any problems but if i'm not wrong i never got a suggestion with this requisites.
If i miss one please do it again and i will buy the kit to try is very important for me...

I use VG because PG makes my chest hurt.

I use mini Protanks daily, with coils from around 1.7 ohms to 2.1 ohms, at around 10 W. You can buy heads for them now with cotton wicks. And you can rebuild the heads with whatever wicks and resistance you want. And they work fine with VG, even unflavored. Never had to add water. Long slow inhales like you were looking for. Go through the juice very slowly. Though I doubt they would work at the water and power levels you have chosen. I doubt if anything would.

I don't think any different tank would change your results.

 

[eddykoodoo]

I use VG because PG makes my chest hurt.

I use mini Protanks daily, with coils from around 1.7 ohms to 2.1 ohms, at around 10 W. You can buy heads for them now with cotton wicks. And you can rebuild the heads with whatever wicks and resistance you want. And they work fine with VG, even unflavored. Never had to add water. Long slow inhales like you were looking for. Go through the juice very slowly. Though I doubt they would work at the water and power levels you have chosen. I doubt if anything would.

I don't think any different tank would change your results.

Mini protank 1 or 2 what is the difference between rhe two?

 

[eddykoodoo]

Ok finally i found the cotton coils i'm looking for Kanger SOCC MT32 2.2 ohms...

I need your help cause i need a battery an atomizer...

1)Atomizer should be something like EVOD,Protank,Protank mini 2 something around 14mm diameters fit well with 650 mah battery

2)Battery should be 650 mah 3.7 volt and most important thing is COSTANT VOLTAGE and PASSTROUGHT microusb

Can you suggest me this two points and finally is done?

 

[Cheallaigh]

compromise... learn the word, try it... and go through your old posts and maybe actually look at all the devices suggested this time... at this point are we expected to vape it for you? you'll get it and complain yet again.

 

[eddykoodoo]

compromise... learn the word, try it... and go through your old posts and maybe actually look at all the devices suggested this time... at this point are we expected to vape it for you? you'll get it and complain yet again.

I'm just asking with the suggested coils which is the best atomizer compatible to use?

Protank mini V2 ? Pyrex and tight draw?
Or maybe there is something better just asking?

2.2 ohm cottons coil amazings i reade great reviews i couldn't even image they exist

 

[eddykoodoo]

Today my ecig shop showed me a fantastic adapter turn any 510 battery to an ego.
So i can eventually keep my Justfog easy 9 battery and attach a Kanger Emow atomizer wich is 16 mm exactly as my battery...
What about the Emow atomizer is a good choiche ?

 

[eddykoodoo]

Today my ecig shop showed me a fantastic adapter turn any 510 battery to an ego.
So i can eventually keep my Justfog easy 9 battery and attach a Kanger Emow atomizer wich is 16 mm exactly as my battery...
What about the Emow atomizer is a good choiche ?

 

[GeorgeS]

The "EMOW" tank (actually a renamed Areotank) is a good fit. +2ohm single and dual coils are available in cotton (I prefer Silica), pyrex and has protective metal around tank so it won't break. Very effective AFC. Coils in bulk from Fasttech are fairly inexpensive.

Here's some choices:

Starting from the bottom and working our way up:

• The EVODv1 fits your use pattern. Fixed 3.7V, not sure the tank material but it does have Silica wick which works fine with %100VG. I run 18-25MG %100-%66 VG in mine (the rest being H2O) The atomizers are silly simple to rebuild (preferred over next option)
  
• iTaste CLK! with Aspire K1. This is/was my FIRST mod setup which got me off of smokes. The mod has VV and USB pass through charging and the tank is pyrex and can have ether cotton BVC or Silica BDC coils. Both work with %100VG. The atomizers are a challenge to rebuild.
• Last but not least is the ultimate "toodle puffing" setup - a VMAX mod with a KayFun V4 mounted. The mod can be configured as single or dual battery, VV/VW. The KFv4 is a RTA so needs to be user build configured. Tight air flow and JFC. Top fill, Glass. I usually wick with Rayon.

Here's 4 different setups I have in regular rotation:

While I picked up 5x dual EVOD kits for a mere $5 a kit the "EMOW" kit shown (bottom) was picked up from Fasttech for < $20USD. (I had more than that fall out of my pocket on a nightly basis back in my drinking days)

Both of the tube mods require a 510 charger (comes with it) so no pass through USB charging.

The other two mods USB charge and can last all day. On the left is a DNA75 device outfitted with a Lemo2 RTA. The Lemo2's air flow can be shut off completely. On the right is a TFV4 outfitted with a single coil RBA. Both RTA's are outfitted with Silica rope wick, have ~1ohm builds and last MONTHS between fiddling with the coils/wick on them.

I mention these as the only way to truly customize your vape is to DIY juice AND build and wick your own coils.

Last but not least for size compare here's the EMOW, 3-Speed EVOD and EVOD1:

All the tanks pictured above could be outfitted on a 510-to-eGo adapter and used with any mod. (not stuck using a tube mod)

 

[gotch23]

yep, the emow is great. Love mine, although i haven't used it in quite a while.
It will suit your needs. It is a true mtl tank. Coils can also be rebuilt with cotton;
imo... if you're that picky about your vape and not willing to just suck it up, and you're saying
that you're basically willing to do whatever... then get into rebuilding those pro-tank heads.
Then you have a mtl-vape fit for a king for almost no money with minimal effort.


Although just the stock coils get the job done very well too.
Silicone is a fine wicking material. It can also char though (differently... gives off an odd taste).
There's basically some concerns with any wicking or wire material. If you want play it hundred
percent safe (not on the harm reduction band wagon) vaping is not for you.
Also i wouldn't be concerned about the markings on your cotton... that's perfectly fine.

 

[englishmick]

Mini protank 1 or 2 what is the difference between rhe two?

I never had a PT 1 so I don't know what the difference is. I don't think you can still buy the PT 1. If you get a PT2 mini it's worth getting an updated airflow section. They let you adjust the airflow to meet your needs which you can't do with the stock PT2. It's actually the stock airflow section from the Aerotank.

It's a pretty flexible tank, especially if you rebuild your own heads.

You can get a PT2 for $7 now. Google Protank mini and hoosierecig. The airflow section costs around $7 as well. You can get them from a lot of places, try Myvaporstore.

 

[kiba]

This thread is cancer.

 

[Alien Traveler]

This thread is cancer.

So, why you are participating in it? Keep yourself away and be happy.

 

[kiba]

So, why you are participating in it? Keep yourself away and be happy.

It's like a train wreck, you want to look away but you just can't.

 

[Cheallaigh]

just wait... he's post some tinfoil theory or a complaint about it in a few days, because he wont do his own research and refuses to learn.

 

[KenD]

Maybe i'm not good to explain me well when i talk about to much vapor...

Trying to explain you better for your understanding:

You for sure remember when we started vape with old devices 36 mg was strong 18 mg was medium an 9 mg was light nicotine intake...

You can be agree on that?

Few days ago i tried a subohm kit with just 4mg of nicotine and i was close to vomit with light head and the strongest hit i ever tried on a Ecig...

I'm using Justfog Q16 1.6 ohm at the lowest voltage 3.4 volt wich is the lowest wattage for this device...
And even if is considered a very soft vaping from subohm users for me with my 9mg liquid is too strong nicotine intake each draw.

So i have 2 options:

1)Lower the nicotine of the liquid cut by hal lets say at 4.5 mg i already tried and is much better but than i finish the liquid very fast and always finish with a discharged battery...

2)Do short draw as i'm doing right now but is not a nice style of vaping always being careful to not exceed and get to much nicotine each draw...

3)Looking for a less powerful device work well but consume a lot less liquid so i would be fine with 9mg nicotine...


Basically i would kill for a 2.2 ohms coils 3.7 volt costant battery but with Pyrex and Cotton...

With many modern tc/vw mods (the eleaf Pico for example) you can go down all the way to 1w, no matter the coil resistance. Get the Pico (tiny) and a mtl tank of your choice. You don't need to hunt for high resistance coils that are difficult to find nowadays, or outdated clearos.

Sent from my M7_PLUS using Tapatalk

 

[mongo74]

If you're a huge protank or e-go fan, watch Robert Ellis's "the armed vaper's" channel on youtube.

 

[Cheallaigh]

he wants something exactly like he had before and exactly 3.7v constant cannot vary, 2.2ohms, no clouds, tiny, pyrex, cotton, built in battery that will last a full day, uses very little juice, micro usb connection, pen style and tiny... i don't think i left anything out.. dedicated multiple posts asking for this exact thing, with a lot of great responses he's ignored... oh and anything above 7 watts is dangerous... i think i've about summed it up.

he wants a unicorn and nothing less.