Small Review of MrPuffer MP1 Mod!!!

Status
Not open for further replies.

Amajn

Unregistered Supplier
ECF Veteran
Jul 13, 2009
1,874
428
41
New York
www.gloryvapes.com
INFO on my MP1......

Ok i have been using this device since for about 9 hours and it has got better and better

It is a Black painted cleared 510 Mrpuffer 1 with a 3ml juice fed system with a color changing led it was 45 plus 5 for shipping


1.At first the button was a little stiff and it seemed a little too firm it has now became much easier and much smoother acting obviously its breaking in still!


2. The juice bottle is very easy to press when full. And obviously harder the lower it is i find myself pressing the bottle in for 5-7 seconds to refill the cart.
When i removed the cart to see how it was filling i noticed after 2-3 second pushes it would fill the fluid into the cart then when releasing the bottle the suction actually sucked it all back out lol which is why i do about 5-7 seconds to fill it nicely.


I have not tried but im sure that if you removed the Poly-fil it would work as a straight auto drip

3. The tube,bottle,cap are all able to be removed cleaned or switched
the unit comes with a extra bottle both are 3ml in size and he puts some extra poly/fil in with the box.


I attempted to see if it would leak i held it upside down for quite some time with not one bit of leakage!!!! this was important to me as i was taking it out with me
it has a on off switch so once pocketed it cannot misfire
i was however worried that the tubing would come off and well it did once or twice but did not leak i snugged it in real tight and has not since repeated


4.The quality of this mod so far is exceeded my expectations the fact that i went out tonight with only a spare atty was so awesome

i usually take a cart 10ml of juice and then have to refill every other min

it was great to have one item i have been using some AW 14500 batts and they shine in this device i cannot wait to try some LR attys!!

Great mod it acutally does what it is supposed to i dont need to Screw the bottle half way on or off, no juice changing color,no blowing into a hole or tube, no constant flooding, and as a matter of fact it has not flooded once due to like i said the suction after you release the bottle it removes excess fluid not to say you cannot flood the device im sure someone can!!:rolleyes:

It does what it says and it is a true JUICEBOX!!

Here are some pics with comparison shots of my PV1 5vmod and chucks

i will shoot a vid at some point to show how it vapes which it vapes awesome!!!

TY Mrpuff COngrats on a awesome mod:thumb:
 

Attachments

  • IMG_0361.jpg
    IMG_0361.jpg
    40.2 KB · Views: 368
  • IMG_0353.jpg
    IMG_0353.jpg
    39.6 KB · Views: 599
  • IMG_0351.jpg
    IMG_0351.jpg
    39.8 KB · Views: 347
  • IMG_0354.jpg
    IMG_0354.jpg
    40 KB · Views: 356
  • IMG_0352.jpg
    IMG_0352.jpg
    39.4 KB · Views: 393

margate11

Full Member
ECF Veteran
Verified Member
Jul 21, 2009
30
15
86
After reading Amajns review I checked outside the front door and sure enough Mr Puffer was there. Really impressed on the workmenship. Still waiting for the Batts from China (LOL) so not able to test it yet. I ordered a Carlos JB and sent it back because it was a piece of junk. Had to fight three weeks to get a refund.
 

clyde2801

Vaping Master
ECF Veteran
Verified Member
Dec 13, 2009
4,039
3,173
In the land of no hills and red dirt
Nice review. I'm sure that you will find the 901 to be an even better vaping experience.

I had the first prototype of the 501, and it didn't have nearly the vape or tastiness/flavor of the cjb, or other bottom fed juice mods that I tried beforehand. It was better than a standard 901, to be fair. For me, it was the later 901 version that had the vape and flavor closer to a true juicebox.

OTOH, one of the things about the MP over the CJB and other mods, besides size, was durability. Every other 3rd generation mod I've tried has been returned to the manufacturer, while the MP has hanged tough. Both versions struck me as solid mods that would hold up to extended use. The only parts that would give trouble with the MP is the tubing and modified cart, and both could be easily repaired in the field with items from a craft store.
 

Amajn

Unregistered Supplier
ECF Veteran
Jul 13, 2009
1,874
428
41
New York
www.gloryvapes.com
Nice review. I'm sure that you will find the 901 to be an even better vaping experience.

I had the first prototype of the 501, and it didn't have nearly the vape or tastiness/flavor of the cjb, or other bottom fed juice mods that I tried beforehand. It was better than a standard 901, to be fair. For me, it was the later 901 version that had the vape and flavor closer to a true juicebox.

OTOH, one of the things about the MP over the CJB and other mods, besides size, was durability. Every other 3rd generation mod I've tried has been returned to the manufacturer, while the MP has hanged tough. Both versions struck me as solid mods that would hold up to extended use. The only parts that would give trouble with the MP is the tubing and modified cart, and both could be easily repaired in the field with items from a craft store.
Yea i find that the 901 has a better flavor then the 510 when i use high voltage 901 flavors taste better....but i like the airy draw of the 510
i have some LR attys on the way to use on the Mrpuffer i cannot wait to try them
 

Amajn

Unregistered Supplier
ECF Veteran
Jul 13, 2009
1,874
428
41
New York
www.gloryvapes.com
How do you get juice back in the bottle? I don't see a screw on cap.
It pops off them you refill away i used about 3ml in one day I always use more on other mods or by dripping i seem to be saving some liquid this way


Will have a full vid review of it tonight with a break down of it for the curious ppl!
 
Status
Not open for further replies.

Users who are viewing this thread