Smoant Cylon

[madstabber]

in its defence it works every time if it's mashed but it is slightly irksome.

Yea the TS is a good mod, I haven’t got any button rattle, but I wish it hit harder and faster. I use the curve modes or the max preheat to counter this but I don’t like that it makes the normal, high, settings basically useless. My only other complaint is it’s rounded corners makes it unstable when set down. It is surprisingly durable though because I’ve knocked it over and off tables many times and the touchscreen is still intact. Can’t wait for the Cylon, sounds like the answer to all my complaints about the TS.

 

[ShowerHead]

Yes there is

Yeah the link is in my review here and on Reddit. I'm on mobile or I'd link it lol

Language barrier. The link is software that allows pictures to be uploaded to the mod.
It is not an update for the mod.
Which is good. There wasn't an oversight that needed fixed so quickly.

 

[SteamHead]

I'll be pairing mine with a black resin Fireluke, the resin has subtle brown swirls. Smoant has a tarnish rta that is well thought of and easy to maintain and they are/have released a subtank that will probably be fair to good. Steam Crave Aromamizer line offers gunmetal finish. Think the Drop now has a gunmetal as well. I know there are a couple others out there, just not coming to mind.

Thanks for those suggestions! The Siren V2 is another one, for those looking for a MTL setup.

 

[Anthony_Vapes]

Language barrier. The link is software that allows pictures to be uploaded to the mod.
It is not an update for the mod.
Which is good. There wasn't an oversight that needed fixed so quickly.

that's correct but they are also making an update to lower soft cell cutoff to 3.0 outside of that i don't believe any other updates are needed/coming current cut off is around 3.2ish

 

[SteamHead]

that's correct but they are also making an update to lower soft cell cutoff to 3.0 outside of that i don't believe any other updates are needed/coming current cut off is around 3.2ish

It'd be awesome if they could make that user adjustable. I rather it stay where it is, or be even higher.

 

[Letitia]

I don't worry about cut off since I don't let my batteries get too low. Usually around 3.7 when I put them on the charger after a rest.

 

[score69]

I agree, perfectly fine with the cutoff where it's at. If current cut off is at 3.2v, that's already lower than when I typically replace my cells. I currently shoot for swapping/recharging when I hit the 3.5v mark. Not hard to keep another set of cells nearby.

If the only updates to be available (or soon) are for wallpapers and lowering the voltage cutoff, I have no need for them. Mine are working like a champ.

 

[score69]

I'll be pairing mine with a black resin Fireluke, the resin has subtle brown swirls. Smoant has a tarnish rta that is well thought of and easy to maintain and they are/have released a subtank that will probably be fair to good. Steam Crave Aromamizer line offers gunmetal finish. Think the Drop now has a gunmetal as well. I know there are a couple others out there, just not coming to mind.

Now you're going to make me have to order a black resin Fireluke, lol. I like my Firelukes, but purple and blue won't look good on the tarnish Cylon. I've been running SS tanks on it so far.

 

[Letitia]

Now you're going to make me have to order a black resin Fireluke, lol. I like my Firelukes, but purple and blue won't look good on the tarnish Cylon. I've been running SS tanks on it so far.

I'll attempt to post a pic.

 

[Anthony_Vapes]

It'd be awesome if they could make that user adjustable. I rather it stay where it is, or be even higher.

would be but outside of DNA mods i'm not aware of any others that do it. ti's already a great value for a mod under 50 bucks with a color screen, built well, takes 30mm attys, leather accents, watt and temp curves, good temp control with every preset mode and TC modes available. custom wall papers all out of the box.

 

[Gallant]

Language barrier. The link is software that allows pictures to be uploaded to the mod.
It is not an update for the mod.

Run the software connect your device then click update

 

[Gallant]

My only issue is a lot of fire button rattle; anyone else?

No rattle at all!

Only thing I've noticed on mine is the I need to press fire near the middle to top of the button to get it to fire. No pressing it at the bottom like some reviews mention.

Mine fires fine on the bottom

 

[Letitia]

No rattle at all!

Mine fires fine on the bottom

Wonder if qc is going to be an issue?

 

[Gallant]

Wonder if qc is going to be an issue?

You will soon find out when you receive yours

 

[madstabber]

Can you update the mod from an iPhone? Or a Mac?

 

[Anthony_Vapes]

No rattle at all!

Mine fires fine on the bottom

mine had a slight rattle.

 

[KenD]

I don't worry about cut off since I don't let my batteries get too low. Usually around 3.7 when I put them on the charger after a rest.

The cells we use are fine down to about 2.5v so a cutoff at 3v, or even a bit lower, is totally fine. Personally, the reason I continued using my Smok Alien even though it had sub-par tc was its 2.8v battery cutoff. Superb battery life. Doesn't matter much when at home, but out and about it means there's no need to carry spare batteries. I've had mods with a 3.5v cutoff and I'd never be satisfied with one nowadays.

Sent from my Thor E using Tapatalk

 

[ShowerHead]

Run the software connect your device then click update

Well, I’ll ask directly.
Is there a firmware update for this mod?
Because there doesn’t seem to be any file to upload in the package I downloaded.
What version were you updated to?

 

[Letitia]

Well, I’ll ask directly.
Is there a firmware update for this mod?
Because there doesn’t seem to be any file to upload in the package I downloaded.
What version were you updated to?

If there was an actual firmware update it may already be on your mod. Most companies now just add it on the new runs.

 

[Letitia]

The cells we use are fine down to about 2.5v so a cutoff at 3v, or even a bit lower, is totally fine. Personally, the reason I continued using my Smok Alien even though it had sub-par tc was its 2.8v battery cutoff. Superb battery life. Doesn't matter much when at home, but out and about it means there's no need to carry spare batteries. I've had mods with a 3.5v cutoff and I'd never be satisfied with one nowadays.

Sent from my Thor E using Tapatalk

I know I can run my batteries lower, just have gotten into the habit of pulling them when they show below 40% or so on battery indicator on mods.