So I got $125 in amazon gift cards for my birthday...

[SgtSponge]

Your welcome!

If you have some brass or copper mods you may be interested in the patina look. If so, look at this wonderful video:

ThATS super kool to bad I dont have any metal mods really just a Kana dna 30 put i guess i could try on that

I just ordered a bunch of stuff off of amazon.
CityPisces is a good vendor there (sells women's shoes mainly) But I got a Tobeco Knight mod in 18650, Gladiator UDT-V23 in 26650, and a Tobeco Orchid V2 from them.
Also picked up a copper Tobh in 18650 and a stainless Tobh in 26650 from amazon... as well as kanthal and nichrome in various gauges...
I had a bunch of gift cards and actually found a bunch of good stuff there... no complaints from me, and if you have any questions on which vendors I got what from, feel free to send me a PM

Oh kool man ill look into the tobh's been looking at a few anyway..what gauges did you get ? Ill be getting my fist cloud chader so I dont know what to get for it ? and should I get Nichrome or kanthol?

If you are into DIY, Essentials Depot sells their VG and PG there.

I want to get into it but im scared ill end up making crap and wasting my money haha

 

[Susan~S]

You could also consider some type of magnifier like this: SE MH1047L Illuminated Multipower LED Binohead Magnifier

This is the first one I saw. If you're interested search Amazon to see if there are others that you would like more.

 

[Garym93]

There is a trusted battery supplier that does business on Amazon. It might be illumination supply not sure. Do the research first but I am about 95% positive one of the good ones has an Amazon store


Sent from my iPhone using Tapatalk

 

[SgtSponge]

You could also consider some type of magnifier like this: SE MH1047L Illuminated Multipower LED Binohead Magnifier

This is the first one I saw. If you're interested search Amazon to see if there are others that you would like more.

Oh Susan your filled with great suggestions

There is a trusted battery supplier that does business on Amazon. It might be illumination supply not sure. Do the research first but I am about 95% positive one of the good ones has an Amazon store

Sent from my iPhone using Tapatalk

Alright I'll shop around for it I'm sure I'll find it somewhere in the world of Amazon

 

[Kaezziel]

Oh kool man ill look into the tobh's been looking at a few anyway..what gauges did you get ? Ill be getting my fist cloud chader so I dont know what to get for it ? and should I get Nichrome or kanthol?

I've got Kanthal in 32, 30, and 28.
Nichrome in 26 and 24.
I guess just get what you want based on what you're trying to do. I don't know your experience level in rebuilding, so I don't want to commit to much as an answer at the moment.
What mods/RDAs/RTAs etc. have you built on before? What do you have for checking resistances/shorts/battery voltages? If you're wanting low ohm builds, you're gonna need VTC4s or 5s if you are into 18650s. KeepPower 50s if you're going on 26650s...

 

[SgtSponge]

I've got Kanthal in 32, 30, and 28.
Nichrome in 26 and 24.
I guess just get what you want based on what you're trying to do. I don't know your experience level in rebuilding, so I don't want to commit to much as an answer at the moment.
What mods/RDAs/RTAs etc. have you built on before? What do you have for checking resistances/shorts/battery voltages? If you're wanting low ohm builds, you're gonna need VTC4s or 5s if you are into 18650s. KeepPower 50s if you're going on 26650s...

Well I've had my KFL+ for 2 months now and have done every build imaginable on it ( duel coil , chimney, micros macros) so I have this down pat...and I'm getting the tugboat as my first rda, played around with my friend and loved it I want me some CLOUDS... I have a regular ohm reader and then I got one on my Kana dna 30 too ( I don't look at that one though it's always different than my actual ohm reader.) I have 28g kanthal and resides my dna 30 I have a Nemesis but that's it don't got alot of mats.

 

[Kaezziel]

I've never trusted those little box ohm reader/build deck boxes (whatever they call 'em). At least not for deep sub-ohm builds... can't beat an actual milli-ohm reader for knowing what you're really running at (unless you spring for a micro-ohm reader)...

That said, I've got a build in a Tobh with 24g Nichrome that measures at 0.13 on my milli-ohm meter, and that thing is a cloud chukka... I do not use it often! It's a 5/4 wrap with a 2mm ID. But you've got to have a good reader to be sure that it isn't actually .0X because there isn't any room for error when you go that low. Those cheap little $10-$20 ohm readers have too much built in error for my comfort at that level...

 

[SgtSponge]

I've never trusted those little box ohm reader/build deck boxes (whatever they call 'em). At least not for deep sub-ohm builds... can't beat an actual milli-ohm reader for knowing what you're really running at (unless you spring for a micro-ohm reader)...

That said, I've got a build in a Tobh with 24g Nichrome that measures at 0.13 on my milli-ohm meter, and that thing is a cloud chukka... I do not use it often! It's a 5/4 wrap with a 2mm ID. But you've got to have a good reader to be sure that it isn't actually .0X because there isn't any room for error when you go that low. Those cheap little $10-$20 ohm readers have too much built in error for my comfort at that level...

Alright kool man thanx for th info.. Ill get some Nichrome and Kanthol for sure and probably a better ohm reader which gagues should I get on the wire?

 

[Kaezziel]

Alright kool man thanx for th info.. Ill get some Nichrome and Kanthol for sure and probably a better ohm reader which gagues should I get on the wire?

If you don't have any 28g, I'd get some of that... it's a good general purpose gauge (you can always twist 2-3 strands together for less resistance). For solid sub-ohm builds, I'm liking the 26g Nichrome... I onlyl use the 24g when I wanna "show off" or build for a comp.
30g & 32g is what I use in my Orchid V2 so that I can use it on my Tesla... it's limited to >1.3 ohm to fire (<1.3 and the mod won't even fire) it is much easier to get high resistance coils with tiny wire.

 

[SgtSponge]

If you don't have any 28g, I'd get some of that... it's a good general purpose gauge (you can always twist 2-3 strands together for less resistance). For solid sub-ohm builds, I'm liking the 26g Nichrome... I onlyl use the 24g when I wanna "show off" or build for a comp.
30g & 32g is what I use in my Orchid V2 so that I can use it on my Tesla... it's limited to >1.3 ohm to fire (<1.3 and the mod won't even fire) it is much easier to get high resistance coils with tiny wire.

Alright kool man thankyou so much for the info ...now all I need to do is find some place that has VTC5'S in stock hahahaha

 

[Kaezziel]

Good luck on the VTC5s....

But you can get VTC4s here... same battery, just 400mAh lower than the VTC5... still has 30A continuous discharge.
Xtar 30A 2100mAh (VTC4)

 

[ddkl7780]

I wouldnt buy batteries on amazon...http://www.amazon.com/Winding-Jig--...?ie=UTF8&qid=1411579407&sr=8-31&keywords=Ecig that might help ifyou have trouble wrapping coils

 

[cmangoboogie]

I wouldnt buy batteries on amazon...http://www.amazon.com/Winding-Jig--...?ie=UTF8&qid=1411579407&sr=8-31&keywords=Ecig that might help ifyou have trouble wrapping coils

There is a version on Ebay for between 10-15$ depending on who has one.

Sent from my SCH-I535 using Tapatalk

 

[SgtSponge]

I wouldnt buy batteries on amazon...http://www.amazon.com/Winding-Jig--...?ie=UTF8&qid=1411579407&sr=8-31&keywords=Ecig that might help ifyou have trouble wrapping coils

Yea i got one of those first thing i love it!