Squape Reloaded Clone

Status
Not open for further replies.

COM76

Super Member
ECF Veteran
Verified Member
Mar 18, 2010
608
396
QLD, Australia
As far as I know the version with glued frosted glass in the Kingtu, the version with the O rings and pyrex tank is the Coppervape and the FT is the Ivogo - the Ivogo has a pmma tank and looks rough.

Yes the FT one has the same box as the Ivogo Squape but the Ivogo is said to be glass not plastic. Also the Ivogo one has an engraved number on the base, whereas the FT one does not. It is all confusing.
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    Got my squape clone from focalecig today, I was lucky to order it before it got pulled, the only con for me so far, it is not a glass tank section, but plastic, so have to be careful what juice to put in it, but otherwise it was very worth the money, especially as it came with all 3 decks too.

    tmIwT34.jpg


    Coiled with 24gauge 7 wraps @ 0.50ohm using japanese cotton
    OybGGpr.jpg


    Sitting in top of the hanaa, vaping at 25 watts
    Ut7pYmi.jpg


    Decided to use the 'w' base, as vaping sub ohms with high watts, so using the 'w' base, could have more cotton to make sure it wicks fast enough, and so far it seems to be working really well, wicking well and no leaking at all.

    The air flow as expected is really good, the biggest hole is great for lung hits, but do lose flavor, I am liking the 4th biggest hole, still plenty of air flow, but getting good flavor too though.
     

    AnsonJames

    Ultra Member
    ECF Veteran
    Verified Member
    Jun 23, 2011
    1,855
    2,239
    IRELAND
    Which one seems to not have as much negative feedback?
    Not enough info out there right at the minute - the Focal one works without leaking so I guess that's got to be one of the better ones, pity about the plastic tank.
    If Kingtu start putting o rings into their version - it will be top notch, the deck and the chimney are genuine ematal coated.
    The finish is as good as the genuine too.

    I'll update if I get a fixed top section.
     

    Nuclear Cowboy

    Super Member
    ECF Veteran
    Verified Member
    May 26, 2014
    313
    336
    Memphis, TN
    I had two arrive yesterday. One from EZvapers.com and another from Ebay. I didn't know the manufactor of either before I bought them and they both seem to be from the same maker,,,ELEKAR?????????????

    To make a long story short I'm not impressed. The only thing that holds the center 510 pin is an O ring and it does a poor job of keeping this pin in place and making good contact with the APV. Every time I pull the atty off I have to re-adjust the center pin on the atty or the mod to make contact and I've got a serious ohm's jump problem. The ebay auction said the tank was glass but it's plastic.

    I'm returning the one I bought on ebay and I'll be in contact with EZvapers today about the one I bought from them. Hopefully I can get a refund from them too.

    What a dissapointment. I was really looking foward to these. Once I get this settled I may do a little more resurch and try one from a different manufactor.
     

    Wammus

    Full Member
    Mar 24, 2014
    38
    79
    Netherlands
    I just canceled my Squape i had ordered from Gvapers.
    Gvapers delivers the same Squape as EZvapers.
    My squape was send the 4th but still no movement on the T&T from usps heck they didn't received the item yet.
    I've asked Gvapers to send me The Rose V2 instead of the Squape reloaded.
    I allready have a squape reloaded in transit that i bought at Focale and the Focale one got no glass but for the rest it is a good clone.
    i will post the answer from Gvapers and sorry for my poor English (i'm a 51 year old Dutch guy that learned English on the internet)
     

    M3CH M0D M4DN355

    Senior Member
    Aug 21, 2014
    276
    330
    UK
    I just canceled my Squape i had ordered from Gvapers.
    Gvapers delivers the same Squape as EZvapers.
    My squape was send the 4th but still no movement on the T&T from usps heck they didn't received the item yet.
    I've asked Gvapers to send me The Rose V2 instead of the Squape reloaded.
    I allready have a squape reloaded in transit that i bought at Focale and the Focale one got no glass but for the rest it is a good clone.
    i will post the answer from Gvapers and sorry for my poor English (i'm a 51 year old Dutch guy that learned English on the internet)

    You learned English from the internet? You speak better English than I do! Man I need to go back to school!
     

    Wammus

    Full Member
    Mar 24, 2014
    38
    79
    Netherlands
    Just got an answer from Gvapers and this is the answer;
    Unfortunately, the package has been shipped Saturday. Not sure why it hasn't been updated yet.
    hmm what to do now?
    I think i will wait till tomorrow and if there is no movement on the T&T or they didn't received the Squape i will file a case with Pay-pal (allmost 40 days from the moment i payed for the squape in pre-order)
     

    AnsonJames

    Ultra Member
    ECF Veteran
    Verified Member
    Jun 23, 2011
    1,855
    2,239
    IRELAND
    I've just found out that the tank section/top cap is being replaced for the clone that I bought in the group buy - they'll be sending us top sections with the glass installed with O rings instead of glue. These clones are becoming very hard to find as SQ are sending C&D letters to the vendors that stock them - understandably.

    If you can find them, the Kingtu version is the absolute best version out there - or at least the next batch will be. The engraving is as fine as the original, the placement of the logos is correct plus they use a genuine glass tank and real Ematal coating - it's a true 1:1 and very good quality bar the leaking issue which will now be eradicated.
    I just canceled my Squape i had ordered from Gvapers.
    Gvapers delivers the same Squape as EZvapers.
    My squape was send the 4th but still no movement on the T&T from usps heck they didn't received the item yet.
    I've asked Gvapers to send me The Rose V2 instead of the Squape reloaded.
    I allready have a squape reloaded in transit that i bought at Focale and the Focale one got no glass but for the rest it is a good clone.
    i will post the answer from Gvapers and sorry for my poor English (i'm a 51 year old Dutch guy that learned English on the internet)

    Your English is phenomenal!
    Good call as far as the Rose V2 is concerned, it's a little more fiddly to build but it's a better atomizer than the Squape R in my opinion. I believe the V2 the Gvapers sells also comes from Kingtu - and it's a perfect clone, the air control is actually an improvement over the original Eden version.

    You wont regret getting the Rose instead of the Squape!
     
    Last edited:

    mberlinger3

    Senior Member
    ECF Veteran
    Verified Member
    Aug 2, 2014
    185
    32
    Atlanta, Georgia, United States
    I've just found out that the tank section/top cap is being replaced for the clone that I bought in the group buy - they'll be sending us top sections with the glass installed with O rings instead of glue. These clones are becoming very hard to find as SQ are sending C&D letters to the vendors that stock them - understandably.

    If you can find them, the Kingtu version is the absolute best version out there - or at least the next batch will be. The engraving is as fine as the original, the placement of the logos is correct plus they use a genuine glass tank and real Ematal coating - it's a true 1:1 and very good quality bar the leaking issue which will now be eradicated.


    Your English is phenomenal!
    Good call as far as the Rose V2 is concerned, it's a little more fiddly to build but it's a better atomizer than the Squape R in my opinion. I believe the V2 the Gvapers sells also comes from Kingtu - and it's a perfect clone, the air control is actually an improvement over the original Eden version.

    You wont regret getting the Rose instead of the Squape!
    I smell a group buy on the kingtu version. I'd be interested. Anyway, I think the vape95 version is an elekar (sp?) clone too. I hope it's slightly better than what the other less than decent ones because vape95 seems to be in close contact with the manufacturer. In any case I'll update you on Thursday when I get mine.
     
    Status
    Not open for further replies.

    Users who are viewing this thread