Thanks for the update hubblecraft! I figured with the returns I'll most likely be making I might as well try one more. Lol
Squape Reloaded Clone
- Thread starter yungstu
- Start date
- th_trl_thread_readers 0
- Status
No problem! Glad to help
This should be the end all clone once fixed. I have a feeling my FT Squape R is going right in the trash lol. That's how you do a Fasstech return haha.
Last edited:
OK! This is a Winner!!!! Squape Reloaded Clone from G Vapers. Got home built a 1.8 ohms coil around a 2.38mm ~ 3/32 in drill bit. Wicked it with Japanese Cotton & filled her up. Been using her for 30 to 45 minutes, no leaks at all. Flavor is very good. Clouds.... OMG... Clouds a plenty at 15 watts. Smooth. Just the way I like to vape using the largest air hole.
Personally I do not like to buy clones. I prefer originals, but when the originals are just too damn hard to get and there is a clone that is this good.....
I still might get an original, but I have wanted one in the black they showed from the first announcement that has yet to be made available. So not only is the silver almost impossible to get, the Black IS impossible. So I gave no problem buying, using and being pleased as a hog in mud this G Vapers Clone. No hesitation recommending this at all.
The glass appears to be glass as well. But I did not look at it that closely. All I was concerned about was if it was leaking or not. It ain't.
Personally I do not like to buy clones. I prefer originals, but when the originals are just too damn hard to get and there is a clone that is this good.....
I still might get an original, but I have wanted one in the black they showed from the first announcement that has yet to be made available. So not only is the silver almost impossible to get, the Black IS impossible. So I gave no problem buying, using and being pleased as a hog in mud this G Vapers Clone. No hesitation recommending this at all.
The glass appears to be glass as well. But I did not look at it that closely. All I was concerned about was if it was leaking or not. It ain't.
Last edited:
Got mine from g vapes today... It's good everything works as it should... No leaks but the plastic window portion orings are a b^*+ to put in.... I have an orchid, a kayfun and a big dripper ... So far the big dripper and the orchid are the best, squape reloaded third and kayfun even with drilled out holes is last....
Well, that guy may have just pulled $60 out of my wallet. I'm still waiting on my Ivogo clone to ship but I'm guessing it won't be nearly as nice as the fixed Kingtu. The real ematal coating on the decks and chimney, along with an o-ringed Pyrex tank makes this one hard to beat at just about any price point.
The one from Focale is made by Ivogo according to Doris, my order from Focale arrived today and the quality is good and no leaking or what so ever.
It came with all 3 decks and the tank is made of plastic and the tank is sealed with o-rings.
The coil screws are outstanding en catch the wire easy.
The adjustable airflow works good and i love that part....and the main thing..........The Vape is fabulous.
The 510 screw is hold stable by a thick o-ring and it doesn't wobble.
The plastic is gonna be no problem at all, most juices i use are not tank-crackers and the ones that are i'll vape them in my Blackwood.
With a little luck the authentic glass replacement may fit in this one.
It came with all 3 decks and the tank is made of plastic and the tank is sealed with o-rings.
The coil screws are outstanding en catch the wire easy.
The adjustable airflow works good and i love that part....and the main thing..........The Vape is fabulous.
The 510 screw is hold stable by a thick o-ring and it doesn't wobble.
The plastic is gonna be no problem at all, most juices i use are not tank-crackers and the ones that are i'll vape them in my Blackwood.
With a little luck the authentic glass replacement may fit in this one.
Just got mine in the mail about 20 minutes ago. After building the deck and putting it together - IT LEAKS THROUGH THE WINDOWS ON THE TANK!?!?!?!?!?
Unacceptable, this is completely un-useable. I have sent an e-mail to customer service to Gvapers. we'll see what they have to say. I've been waiting for this atomizer for over a month and now here it is, spilling juice all over my desk
Edit: even though the one I received is un-useable, I would, however, like to comment on the deck. This deck is fantastic! Building is super easy. Just wish I could actually use it.
Unacceptable, this is completely un-useable. I have sent an e-mail to customer service to Gvapers. we'll see what they have to say. I've been waiting for this atomizer for over a month and now here it is, spilling juice all over my desk
Edit: even though the one I received is un-useable, I would, however, like to comment on the deck. This deck is fantastic! Building is super easy. Just wish I could actually use it.
Last edited:
I got a couple today, the g vapers one and the eBay one. They're identical other than a serial number on the bottom of the g vapers clone. I can't seem to build either one. My Hana won't recognize it. Pieces of .....
So, the g vapers clone won't fire. The eBay clone is at least firing.
Last edited:
I don't know why I even tried to fill the tank. The "glass" section seemed very loose.
That's because the gvapers one doesn't have the bottom oring installed for the plastic tube... Top one is in but the bottom one needs to be place in the groove from the spare parts kit... Easy fix
Sent from my iPhone using Tapatalk
So, g vapers got back to me pretty quickly. They said to send it back (they'll reimburse me for return shipping) and they'll send me a replacement.
Just received and built my second Elekar. Zero issues. My first one flooded and leaked due to a nick in the base o-ring, but no issues after replacing it.
The tank glass is sealed very tightly on both units. I dry them out with a blow gun fed with 120 PSI compressed air. If the o-rings were a loose fit, they wouldn't stay in place long.
I've been running on a Provari most of the time, but unscrewing the 510 pin by 3/4 turn makes contact on both of my Hana 30s (s/n 4376 and 6350).
My center pins did seem a little loose until I installed a coil and tightened the deck screws. I can adjust the pin with a fingernail, but they haven't moved installing/removing from a mod (unlike every Russian 91% I own).
I'm using the standard deck with a 1.6 ohm, 28ga, 5/64" microcoil. Wicked it with Japanese cotton, and I did run the cotton down the channels on the sides of the deck. Nary a dry hit in the first week.
Judging from some of the comments here, Elekar seems to have quality control issues. If the tank glass is loose, you're pretty much screwed right off the start. I went through that with the no name clone in the counterfeit box (glued in plastic tank).
Regarding the one in the counterfeit box, I'm not too sure about the quality of the Ematal coating. The material on the one I had was a very dark slippery substance, and there were lighter areas on the sides of the chimney. Looked more like a sprayed-on skillet coating. I have an authentic Squape (not Reloaded) and the Elekar's coating is very close. The one in the counterfeit box had deck screws with smaller heads, and the threading was difficult to engage when screwing the base into the tank.
Personally, I'm very impressed with the quality of my Elekars ***BUT*** based on other's comments, I'd only buy one from a vendor with a good return policy. If Elekar's quality isn't consistent, that's a big problem. And right now, it looks like a roll of the dice.
The tank glass is sealed very tightly on both units. I dry them out with a blow gun fed with 120 PSI compressed air. If the o-rings were a loose fit, they wouldn't stay in place long.
I've been running on a Provari most of the time, but unscrewing the 510 pin by 3/4 turn makes contact on both of my Hana 30s (s/n 4376 and 6350).
My center pins did seem a little loose until I installed a coil and tightened the deck screws. I can adjust the pin with a fingernail, but they haven't moved installing/removing from a mod (unlike every Russian 91% I own).
I'm using the standard deck with a 1.6 ohm, 28ga, 5/64" microcoil. Wicked it with Japanese cotton, and I did run the cotton down the channels on the sides of the deck. Nary a dry hit in the first week.
Judging from some of the comments here, Elekar seems to have quality control issues. If the tank glass is loose, you're pretty much screwed right off the start. I went through that with the no name clone in the counterfeit box (glued in plastic tank).
Regarding the one in the counterfeit box, I'm not too sure about the quality of the Ematal coating. The material on the one I had was a very dark slippery substance, and there were lighter areas on the sides of the chimney. Looked more like a sprayed-on skillet coating. I have an authentic Squape (not Reloaded) and the Elekar's coating is very close. The one in the counterfeit box had deck screws with smaller heads, and the threading was difficult to engage when screwing the base into the tank.
Personally, I'm very impressed with the quality of my Elekars ***BUT*** based on other's comments, I'd only buy one from a vendor with a good return policy. If Elekar's quality isn't consistent, that's a big problem. And right now, it looks like a roll of the dice.
- Status
Similar threads
