Squape Reloaded Clone
- Thread starter yungstu
- Start date
- th_trl_thread_readers 0
- Status
Yep but you have to close down the airflow to get more liquid pulled to the wick.
And I was at 25W on my ipv.
And I was at 25W on my ipv.
Indeed....Satin comes from FT as well, the same box /lol
Thanks I did file a support ticket for the Satin Repair kit for my FT Devil. Should be interesting to see how long my new fix ala food grade silicone works. Just sitting and vaping.
For god sakes lube the tube and the plastic tank and the elcheap two orings before you attempt to install them.
Welcome to H E L L
Thanks I did file a support ticket for the Satin Repair kit for my FT Devil. Should be interesting to see how long my new fix ala food grade silicone works. Just sitting and vaping.
For god sakes lube the tube and the plastic tank and the elcheap two orings before you attempt to install them.
Welcome to H E L L
I couldn't see any ematal either, but it was there. My first coil should have been 1.5 ohms or thereabouts. I turn on the ohmmeter and see...0.1ohm, lol! Ugh, no, that's not possible.
Wow look what I found, the EHPRO SR clone w/3 decks!!! Do any of you know if the EHPRO is fine in regards to leaks and the 510 issues?
Ehpro 1 1 Atomizer Clone Rbta Style of Squape R Reloaded Preorder SHIPS11 03 10 | eBay
BTW is $49.99
Ehpro 1 1 Atomizer Clone Rbta Style of Squape R Reloaded Preorder SHIPS11 03 10 | eBay
BTW is $49.99
Last edited:
Choose your poison.
Same seller just a different bundle and factory: New RBA Rbta 1 1 Style of Squape R Reloaded with 2 Glass Tanks 3 Decks HQ Kingtu | eBay
Welcome to H E L L
Choose your poison.
Same seller just a different bundle and factory: New RBA Rbta 1 1 Style of Squape R Reloaded with 2 Glass Tanks 3 Decks HQ Kingtu | eBay
Welcome to H E L L
Same 510 issue? Wait a sec, I linked the EHPRO version not Kingtu...
Play nice!!! Seriously, any word on the EHPRO version? I think its the best out of the bunch atm and now you can get the 3 decks I might go for it.
Last edited:
I have no clue on the 510 issue. I'm going to blame Marc!!! /lol /joke
I ordered and so did Marc but until I get my grubby little paws on one, I have no clue.
Welcome to the Early Adopters Club
Besides that, we are approaching 4 hours with no base leak after my fix on my FT Satin Mod
I ordered and so did Marc but until I get my grubby little paws on one, I have no clue.
Welcome to the Early Adopters Club
Besides that, we are approaching 4 hours with no base leak after my fix on my FT Satin Mod
I've been watching that one, too. (It's the reason for my searches that led me to this thread in the first place.) It's been relisted two or three times since I first started watching it and another preorder for a KingTu clone. I think the estimated dates keep getting pushed back, but I can't remember for sure due to the way they sometimes listed only when they expected their batch to ship vs. when they expected to ship them out to buyers.
The no-logo version is really appealing, but after this thread ... I'm scared! Chuckie is obviously in search of new victims.
I wish it was easier to find the originals.
EDIT:
I'm not in the club yet, but "Rah Rah Rah! Go Team Go!" wholeheartedly from up here in the cheap seats!
Last edited:
Four hours is pretty stable for one of the SR clones, new record !!! I will keep checking back to see how it goes for you. Best of luck, I'm off work omw home to build my Erlkonigin clone. Just got delivered, woot! 
I've been watching that one, too. (It's the reason for my searches that led me to this thread in the first place.) It's been relisted two or three times since I first started watching it and another preorder for a KingTu clone. I think the estimated dates keep getting pushed back, but I can't remember for sure due to the way they sometimes listed only when they expected their batch to ship vs. when they expected to ship them out to buyers.
The no-logo version is really appealing, but after this thread ... I'm scared! Chuckie is obviously in search of new victims.
I wish it was easier to find the originals.
I agree, I would get an authentic but too hard to find in stock atm (take note modders, make more stuffs so you can have more money)... I really like this RBA so I would pay full on this and depending how the Erlkonigin performs that too.
I have no clue on the 510 issue. I'm going to blame Marc!!! /lol /joke
I ordered and so did Marc but until I get my grubby little paws on one, I have no clue.
Welcome to the Early Adopters Club
Besides that, we are approaching 4 hours with no base leak after my fix on my FT Satin Mod
I'm taking you all down this dark road with me!
That's all I got....
Roxy is taking a wait and see approach on the Kingtu and EHPro
Good move! I'm not nearly as smart as you are and now you have proof.
Kingtu on the way.
I decided not to wait for FC to get my new pin in the mail and followed Marc's lead. I just ordered some stainless M3 x 16mm machine screws. I was hoping to find brass but no dice.
They are flat heads and hopefully won't be too big. I did figure out a 510 insulator from an Aspire BVC coil fits damn near perfectly in 510 pin hole in the SqR deck. The flat head on the machine screws I ordered are likely quite a bit larger than the head on the existing pin but should snug up against the BVC insulator nicely. It was only a $7.00 gamble (for 50 of them, lol). If they work I'll gladly share the wealth with anyone interested.
They are flat heads and hopefully won't be too big. I did figure out a 510 insulator from an Aspire BVC coil fits damn near perfectly in 510 pin hole in the SqR deck. The flat head on the machine screws I ordered are likely quite a bit larger than the head on the existing pin but should snug up against the BVC insulator nicely. It was only a $7.00 gamble (for 50 of them, lol). If they work I'll gladly share the wealth with anyone interested.
Last edited:
Hell inswva Roxy inspired me after working on hers for I think 10 hours total. Be careful with the insulator that you don't block your air hole. If you look down the opening you'll be able to see how far you can go.
I have been vaping mine at 25 watts with a 0.5ohm coil, using the 'w' deck with japanese cotton and not had wicking problems myself, know that's not quite as high as you was asking, but thought it was close enough for my reply
I have one from g vapers that came in the exact *same box* but, also came with a black airfow control ring. it's made by elekar and sofar it's been spot on *knock on wood* it's sad so many of you are having issues! awesome device. it's now tied with the Heron for vape qualityIndeed....Satin comes from FT as well, the same box /lol
Thanks I did file a support ticket for the Satin Repair kit for my FT Devil. Should be interesting to see how long my new fix ala food grade silicone works. Just sitting and vaping.
For god sakes lube the tube and the plastic tank and the elcheap two orings before you attempt to install them.
Welcome to H E L L
Last edited:
Wow, there seems to be a love-hate thing for Chucky. 
I hope you guys can fix whatever's wrong with this thing. Right now I'm kind of torn between keeping it or getting my money back.
Just got mine from FT today, with the short pin.
I hope you guys can fix whatever's wrong with this thing. Right now I'm kind of torn between keeping it or getting my money back.
Just got mine from FT today, with the short pin.
- Status
Similar threads
