SubTank mini spitting issue

[Imperialchugger]

you gotta find your sweet spot man. redid my setup and wick and the splitting went away. did a parallel coil at 0.5 ohm and it was dope.
one thing i dislike about subtank is the hot vape. 25w and ya burning your lungs.

 

[Jojo1991]

you gotta find your sweet spot man. redid my setup and wick and the splitting went away. did a parallel coil at 0.5 ohm and it was dope.
one thing i dislike about subtank is the hot vape. 25w and ya burning your lungs.

what guage wire are you using?

 

[Imperialchugger]

26 gauge on 0.25mm

 

[Minzy]

you gotta find your sweet spot man. redid my setup and wick and the splitting went away. did a parallel coil at 0.5 ohm and it was dope.
one thing i dislike about subtank is the hot vape. 25w and ya burning your lungs.

That happened to me when i squeezed the coil together. Made a spaced coil, and was a whole lot better.

 

[NaughtyClownn]

Using the 0.5ohm occ. It still spits. I guess its just the tank. Haha!

 

[jemton]

i manage to get my subtank mini to not spit...

messed around with the wick and coil alot till i finally figured...

u have to really wick it properly into the 2 holes... not to much not too little just nice and fluffy covering both holes...( wick at the coil cant be too loose or tooooooo tight * after wicking it through pull left and right *)

 

[Jojo1991]

The best build i had on my subtank was 24g 6wraps 3mm vertical coil... my best coil so far for subtank, wicking a bit tricky and different but is pretty easy...

 

[jemton]

any alternate tanks u guys recommend for the kboxmini? i too got a subox starter kit

The best build i had on my subtank was 24g 6wraps 3mm vertical coil... my best coil so far for subtank, wicking a bit tricky and different but is pretty easy...

 

[kkiet]

Try playing around with your wick, that is what I think the problem is.

 

[Epic_Sinner]

Haha I have the perfect wicking method for subtank. No dry hits, no spitting, no leaking. By far most perfect. Would love to show you guys but have to think of a way. If you guys wanna know more, please pm me instead.

 

[javafreak]

Haha I have the perfect wicking method for subtank. No dry hits, no spitting, no leaking. By far most perfect. Would love to show you guys but have to think of a way. If you guys wanna know more, please pm me instead.

Do a tutorial on a new thread.

 

[Epic_Sinner]

Haha. Just PM me. I am lazy to do up a tutorial.

 

[WarA]

build has to be very specific about its brand of cotton used due to its thickness of which, general rule i use is roughly 2x internal dimension of coil pull through back and forth a little and cut to edge of deck then just plop the cap on and screw it down. No spitting perfect hits. 90% of the time it works every time

 

[Epic_Sinner]

Yep. Wara has got it right.