Svoë Mesto Kayfun III ES Discussion/Questions

Status
Not open for further replies.

Kataphraktos

Vaping Master
ECF Veteran
Verified Member
May 1, 2013
3,241
10,032
New York, NY
A few observations:

1. I love the default drip tip's aesthetics, but the vape is much too hot for me. I prefer a cool vape. I swapped it out for the adapter and a long-neck drip tip, and now it is as I prefer it. The vape was so hot it was burning my tongue.

2. I went through a full tank of 6mg VCV Mewlew's Magic Blend, a very very thick VG liquid, and it didn't stop wicking until there were perhaps three or four drops left in the chamber. No fall-off in vapor, no burnt flavor until then. Wicked.

3. I am now trying some 12mg Ahlusions Smooth Criminal (also VG), and this thing is smashing nicotine into my face like it's looking for the Higgs Boson. I had to loosen the air flow screw a bit so I wouldn't need a defibrillator. 12mg is normally my nic limit, anything higher tastes like poison to me. I'll be making all my future liquid orders 6mg or less.

4. Regardless, I cannot really take the vapor down - I am using this like a pipe or cigar, mouth vaping only. I don't mind this at all, the flavor is so good, I don't miss breathing it down at all.
 

icucme2

Ultra Member
ECF Veteran
Verified Member
Jul 15, 2012
1,823
2,386
42
Costa Mesa, ca
I just ordered a kayfun and I am kind of confused. Where can I get a filler bottle or tip to fill the kayfun?

Mcmaster.com search "luer" and u will see the plastic tips under there.. I think 20gauge r good. There cheap enough to get one of each size to see
 

fed71

Moved On
ECF Veteran
May 29, 2012
626
535
Krasnodar, Russia
  • Deleted by classwife
  • Reason: Forum Rules

fed71

Moved On
ECF Veteran
May 29, 2012
626
535
Krasnodar, Russia
  • Deleted by classwife
  • Reason: Forum Rules

mavieboy

Super Member
ECF Veteran
Verified Member
Dec 22, 2012
420
70
SG
I have spheroids and kayfuns I do agree with some juices flavor is a little better with the spheroid I think that's to do with the small close chamber. I like both the same my top 2 rebuildables by far.Also try normal silica and or different wire.
If you decide to get rid of it hit me up i'd trade you one of my spheroids and some cash for it I have many always will!

got it running already =D flavour is awesome. i am a happy man now ! glad i sold my spheroid alr!
Lastly i would like thank cloud9vaping for their awesome service as i was having some website issue and they help me secure one! Very much appreciated and would gladly recommend their website to more of my friends =)
 

Dan33

Super Member
ECF Veteran
Verified Member
Apr 15, 2013
382
114
Bay Area, USA
Strange issue here. When I use the fill valve, juice comes out the top. Happens when the tank isn't anywhere near full (it's happened with the tank less than half full, about half full, and nearly full). Amount of juice in the tank doesn't seem to matter. Any suggestions? Obviously I'm already holding the device upside down while filling. Thanks.
It seems like a pressurization issue. Check all your seals and make sure that everything is fastened firmly.
 

Dan33

Super Member
ECF Veteran
Verified Member
Apr 15, 2013
382
114
Bay Area, USA
I just picked up a new kayfun and i been leaking around town all day. I got home, i tried different methods and still leaking. I tried to fill up from the top and turn it upside down to screw the rest of the way and the liquid just leaks out the mouth end. And put it upside down to fill up from the hole and it still leaks from the mouth end. and when i put it upright it vapes fine but sometimes it will leak out the middle hole (air intake). I need helppppp
I hope it is not the case, but it is possible that it might be defective. That having been said, I would check that all seals are installed correctly and all parts are fastened tightly. Do not waste the juice, use water to see if the leaking issue goes away.

When I tried filling from the top, it always leaked. When I started using the filling hole with a thin, plastic tip, no leaking issues at all, but when the juice is no longer visible in the small, clear window, it starts gurgling and it might leak in the collector tank, which is apparently normal. It is just a sign that it needs to be refilled.
 

Dan33

Super Member
ECF Veteran
Verified Member
Apr 15, 2013
382
114
Bay Area, USA
Also what is the best type of wicking material to use? I'm pretty excited to try this thing and I would like to at least have the right wicking material.
This. 3 and 2mm seems to work best. Any size should work, but it seems easier to wrap the coil on a thicker Eko.
 
Last edited:

Dan33

Super Member
ECF Veteran
Verified Member
Apr 15, 2013
382
114
Bay Area, USA
You can use the turbo lighter. For example such as in the photo

images


The wick can catch fire, it's not scary. Just let it burn, being careful of course. Coke is formed inside the coil and on the wick. Therefore it is necessary to press the button Fire several times. If the smoke does not appear - then everything is fine.
Do you take it off the base prior to the flame treatment? I have seen people torching silica on the base, but there is a think plastic isolator there. I am afraid it might melt.
 

Dan33

Super Member
ECF Veteran
Verified Member
Apr 15, 2013
382
114
Bay Area, USA
So I have been reading about how Kayfun boosts flavor a lot, but I was a bit skeptical. I mean, I believed it, but just by reading about it, it was hard to tell how much of a flavor boost it could provide. Well, I wrapped a fresh coil and filled it with Halo's Longhorn. Now, Longhorn is a bold and flavorful juice as is, but in Kayfun, it is as if I have inhaled a triple flavor boost version of it. I wonder if this intense flavor boost is consistent across all juices.

I have also noticed that when using Kayfun, some juices have a noticeably different flavor when exhaled through the nose vs. the mouth. Longhorn's flavor is consistent when exhaled through the nose or the mouth, but Need2Vape's London and Louisville are not, for some reason.

Has anyone else noticed something like this?
 
Status
Not open for further replies.

Users who are viewing this thread