SXK Billet box...

[BillW50]

Is that the unitank that comes with the Supbox? If so I'll try that trick myself.

There are two of them included. One with a black Delrin bottom and one clear bottom. You want to use the black Delrin bottom one.

Make sure the Abyss PnP bridge bottom will fit inside first. Then trim off of the upper lip of the bridge to fit.

That bridge that is inside of the SXK Unitank will also fit RPM coil heads I think. I don't have any RPM coils so I'm not sure.

 

[b.m.]

Is that the unitank that comes with the Supbox? If so I'll try that trick myself.

I was wrong,the one I did is the euc bridge not the pnp.I think the pnp could be used with a metal sleeve at the bottom in an a tank like BillW50 mentioned though.

 

[b.m.]

There are two of them included. One with a black Delrin bottom and one clear bottom. You want to use the black Delrin bottom one.

View attachment 969256

Make sure the Abyss PnP bridge bottom will fit inside first. Then trim off of the upper lip of the bridge to fit.

That bridge that is inside of the SXK Unitank will also fit RPM coil heads I think. I don't have any RPM coils so I'm not sure.

Nevermind,I think I'm mistaken,I believe what I posted is the euc bridge,not the pnp.

 

[BillW50]

Yeah,that's the one,they sell them separately also,but same type.You don't have to modify anything on the tank,I was a little off saying it was just the lip on the bridge though,I had to completely remove that lip,and then on the front and back,I had to grind away some of the knurled area to make it flat so the top would go on the boro.

View attachment 969268 View attachment 969269

That is for the Abyss EUC bridge. The Abyss PnP bridge needs the black Delrin bottom Unit Tank. Because they use the larger bottom hole for the wider PnP coils.

 

[b.m.]

That is for the Abyss EUC bridge. The Abyss PnP bridge needs the black Delrin bottom Unit Tank. Because they use the larger bottom hole for the wider PnP coils.

Yeah,right after I posted the pics,I realized it was the euc haha.So the black base fits the pnp?

 

[BillW50]

Yes, the black Delrin base should fit PnP, GTX, RPM, SXK coils, maybe Vandy Vape VVC coils, etc. You just need the right bridge.

 

[Pigs]

There are two of them included. One with a black Delrin bottom and one clear bottom. You want to use the black Delrin bottom one.

View attachment 969256

Make sure the Abyss PnP bridge bottom will fit inside first. Then trim off of the upper lip of the bridge to fit.

That bridge that is inside of the SXK Unitank will also fit RPM coil heads I think. I don't have any RPM coils so I'm not sure.

Thanks @BillW50 . I have a unitank with the black delrin base but the Abyss PnP adapter fits in very loosely. It wobbles around without a seal at either the top or the bottom.
Do you have a photo of how yours works?

 

[Pigs]

Here's the unitank I have with the PnP bridge and a coil inside.

 

[BillW50]

You need an o-ring just above the lip. Did you grind the lip of the bridge to fit? Or it wasn't required? The PnP coil has its own o-ring on the coil. If loose, it needs a thicker one.

I use the impossible to find nowadays the Unit Tank (Unitank) with the its own PnP bridge in any boro compatible. The Abyss PnP bridge I use in the Abyss itself.

 

[Pigs]

You can see here that the base of the SXK coil that came with my Supbox/unitank has a bigger diameter base than the PnP coil.
I can't see a PnP working with the unitank I have.

EDIT Ok - just saw your post about the O ring @BillW50 . I might give that a try.

 

[BillW50]

You are right. Here is the PnP Unitank (left) and the SXK coil Unitank (right) with the coils at the bottom. They are different. The PnP coil just falls straight through the base on the right. Both of these are in my needs to be clean pile, so they are dirty. Sorry.

 

[borno]

You can see here that the base of the SXK coil that came with my Supbox/unitank has a bigger diameter base than the PnP coil.
I can't see a PnP working with the unitank I have.
View attachment 969274

EDIT Ok - just saw your post about the O ring @BillW50 . I might give that a try.

I've got a rpm rba coil in the sxk tank that came with the supbox

 

[Pigs]

You are right. Here is the PnP Unitank (left) and the SXK coil Unitank (right) with the coils at the bottom. They are different. The PnP coil just falls straight through the base on the right. Both of these are in my needs to be clean pile, so they are dirty. Sorry.

View attachment 969275

Thanks, that makes sense. It would make life easier if SXK had labelled their different Unitanks clearly. Never mind - it was more curiosity from me. I'm not too desperate to get the PnP bridge running in a BB.

 

[badinfluence357]

Down the rabbit hole we go!!!

 

[Cortez85]

Finally back in action! Evolv to the rescue and also got sent an extra screen by pro vapes! Let the fun begin!

 

[badinfluence357]

Finally back in action! Evolv to the rescue and also got sent an extra screen by pro vapes! Let the fun begin!

Looking good there Cortez!

 

[Cortez85]

Looking good there Cortez!

Appreciate it! I’ve been ready to use this thing for weeks now lol. So far so good been using the mobb minnie and it’s super good so far.

 

[badinfluence357]

The Atom isn't bad, and I would like feedback from you guys on the Orbit. Im not feeling it so Im looking for feedback to see if others feel the same.

 

[Pigs]

The Atom isn't bad, and I would like feedback from you guys on the Orbit. Im not feeling it so Im looking for feedback to see if others feel the same.

I like an RDL vape and as far as flavour and smooth AF goes, the Orbit is at the top of my RBA list. It's knocked off the Xeta and the Qbix. Better than the Mobb Mini too imo.
I've been experimenting with 2.5mm and 3mm ID fused claptons (5 wrap - around 0.5 to 0.6 Ohms) and found I get better results with the 2.5.

The only problem I have is with the gasket being loose and sometimes leaking a bit. A strip of teflon tape under the gasket (thanks @borno ) or a thin O ring added cures the problem.

 

[badinfluence357]

I like an RDL vape and as far as flavour and smooth AF goes, the Orbit is at the top of my RBA list. It's knocked off the Xeta and the Qbix. Better than the Mobb Mini too imo.
I've been experimenting with 2.5mm and 3mm ID fused claptons (5 wrap - around 0.5 to 0.6 Ohms) and found I get better results with the 2.5.

The only problem I have is with the gasket being loose and sometimes leaking a bit. A strip of teflon tape under the gasket (thanks @borno ) or a thin O ring added cures the problem.

The problem im having is that fully opened it doesn't really feel like DLH vaping. Its more like a restricted DLH and that was with me completely removing that inner plunger thats obstructing the airflow. I feel the Orbit was designed more for mtl vaping.

Secondly I feel that the juice wells are so tiny that you have no choice but to use a smaller diameter coil to reduce the amount of cotton. Even with a smaller diameter coil and less cotton I feel like it doesn't wick properly... I feel like they over thought it and miss the simplicity of wicking and air flow like the VapeSnail.

Last but not least the deck having four parts to it instead of two. I mean doesn't that reduce conductivity?

This is only my opinion and experience so far...

I'm going to use it a little longer and come back to talk about it...Anyone else that has it please shine some light...