SXK Billet box...

[charlie1465]

I always liked the idea of the billet box, but I didn't pursue because I haven't found a dealer here in the UK with all the necessary parts, which I would buy as I progress - and not in one single, very large money outlay at the beginning. I don't buy direct from China.

There is a dealer in the UK that I use called Provapes...here's a link...which does the SXK clone (this is a clone thread) and I can give you another supplier for the authentic if you wish...I have both

Billet Box & Spares

But nowhere does all the accessories for the BB because they are so diverse So many different makers for the bridges, drip tips, panels and so on.

The website above will get you started and the sxk kit itself comes with a Kanger rebuildable bridge and 2 other bridges...one for aspire coils and the other Kanger. So you're up and running straight away. You might want to get the vapeshell rebuildable...fantastic flavour. The BB is the one vape product I wish i'd got earlier...its a superb vape

 

[BillW50]

Ï do to But be careful thé threads for thé OG are different so won't fit the sxk.

I wouldn't bet on it. All four of my SXK BB use the same threads as the OG. Although there are some OG that isn't the same. I've been trying to figure out which ones isn't. So far I had no luck figuring it out.

 

[laurie9300]

I wouldn't bet on it. All four of my SXK BB use the same threads as the OG. Although there are some OG that isn't the same. I've been trying to figure out which ones isn't. So far I had no luck figuring it out.

My first run SXK has different threads than the OG. They are the same as the OG on my later SXK. I have 2 SXKs with different threads.

 

[charlie1465]

I wouldn't bet on it. All four of my SXK BB use the same threads as the OG. Although there are some OG that isn't the same. I've been trying to figure out which ones isn't. So far I had no luck figuring it out.

Thanks Bill OK so it must have been the first run and maybe they corrected it. I'll test and find out.

 

[Aspiebride]

Alright. Chronic leaking... it was really bad and now that i am making sure the seal is tight on the glass door not so bad but there is still random juice when i take the front door off to adjust battery etc.
I am using the nautilus bridge...
I added a higher vg juice this time thinking maybe my salt was just too thin but...

 

[Aspiebride]

Also best mtl coils?

 

[charlie1465]

Alright. Chronic leaking... it was really bad and now that i am making sure the seal is tight on the glass door not so bad but there is still random juice when i take the front door off to adjust battery etc.
I am using the nautilus bridge...
I added a higher vg juice this time thinking maybe my salt was just too thin but...

Welcome Aspiebride

Are you sure it's not just condensation? The BB's suffer from it because of the airflow inlet and space under the tank so you generally get it just underneath the tank and it runs down the plate where the display is and get's on the bottom part of the door panel. Sometimes it'll come out of the airflow holes on the side.

You can usually identify it by dabbing a bit and smelling it as the condensation is not very strong on flavour whereas if you leak some fresh juice that will be really strong on flavour. If that makes sense

As far as MTL coils go there are lots but i'm not an expert. It's too late now but tomorrow i'll check and see if I can respond more usefully.

 

[Nailz]

Also best mtl coils?

I think the nautilus coils are good for MTL, I am using the 0.70 ohm BVC coils right now, but that may change when get my hands on their mesh coils.

 

[Fredman1]

The EUCs give me the best flavor with the eLeaf Mesh a close second.

That is exactly the case for me to. For me the EUC coils out performs everything that fits into a BB. Its actually amazing considering what they're up against...and them being the oldest on the market. That is no mean feat.

The BB is the one vape product I wish i'd got earlier...its a superb vape

AMEN...and well said Charlie

 

[danielpm]

Hey guys. Do you know if the Bantam uses the same threads as the OG BB and if I can use a JMK hybrid in it?

 

[charlie1465]

Hey guys. Do you know if the Bantam uses the same threads as the OG BB and if I can use a JMK hybrid in it?

Hi Daniel

As far as I know yes. The first run of the sxk BB used different threads but they corrected this in later versions so I would assume that the Bantam box has the same spec as it also uses a Boro.

Hybrid DT's are pretty important for the user experience

 

[danielpm]

Hi Daniel

As far as I know yes. The first run of the sxk BB used different threads but they corrected this in later versions so I would assume that the Bantam box has the same spec as it also uses a Boro.

Hybrid DT's are pretty important for the user experience

Yes, they are. I can't use my BB without them anymore. The only SXK BB that i've had in hand had another threads, probably one of the first batches then. If anyone could confirm what you've said would be awesome

 

[charlie1465]

Yes, they are. I can't use my BB without them anymore. The only SXK BB that i've had in hand had another threads, probably one of the first batches then. If anyone could confirm what you've said would be awesome

@BillW50 can confirm. He has both versions. I originally thought that there was a difference in all the SXK threads until he told me otherwise. I'm not sure if Bill has direct experience with the Bantam though.

I would think you can buy the Bantam with confidence

 

[TrollDragon]

Hey guys. Do you know if the Bantam uses the same threads as the OG BB and if I can use a JMK hybrid in it?

This is in the FT forum comments on the Bantam Box.
"I forgot to mention you cannot your hybrid drip tips on this and my flush 510 doesn't fit."

 

[charlie1465]

This is in the FT forum comments on the Bantam Box.
"I forgot to mention you cannot your hybrid drip tips on this and my flush 510 doesn't fit."

That's bad news. I was told that the first run of the SXK's had different threads but the subsequent runs were the same? Do you have a Bantam box? I would have thought that given the above the Bantam would have the same threads as the later runs of the BB.

 

[danielpm]

This is in the FT forum comments on the Bantam Box.
"I forgot to mention you cannot your hybrid drip tips on this and my flush 510 doesn't fit."

Thats a shame

 

[charlie1465]

Thats a shame

I'm not sure whether @TrollDragon means the SXK or the Bantam...he'll respond in a minute I expect.....hellooo, helloo, anyone out there ....

 

[TrollDragon]

New EUC Mesh coil (0.6ohm 16-22W) coming for the VM Tank, it uses it Tea fiber instead of cotton.

Fasttech has the coils on Preorder at the moment.
$10.17 Authentic Vaporesso VM Replacement Meshed Coil Head (5-Pack) 5-pack - 0.6ohm (16-22W) at FastTech - Worldwide Free Shipping

 

[TrollDragon]

I'm not sure whether @TrollDragon means the SXK or the Bantam...he'll respond in a minute I expect.....hellooo, helloo, anyone out there ....

danielpm was asking about the Bantam Box from SXK, what one are you thinking about?

This is a Bantam Box.

 

[charlie1465]

danielpm was asking about the Bantam Box from SXK, what one are you thinking about?

This is a Bantam Box.

Yes...check my previous responses