Have you tried a different atty? Which are you using? I see that you're into GG.. If you're using a NR/R wire build, I would check your wire joins, and go over the entire build, or try another atty if you haven't already. If you're using the Ithaka with the straight R wire kit, I would still check the build. Your issues kind of seems like what would happen if something were off in the build, and placing stress on the battery.
Regardless, with the 1 year warranty, you should have no problem getting an exchange. Please keep us posted on what happens, and how you are taken care of if it comes to that..
EDIT: If it's not the atty build, I would try running the current update to see if that sets things straight..
EDIT: Perhaps I'm misreading some of your post... "Tried swapping out battery's and checked center pin .. Everything looks great lol".... Was it just the battery, and swapping it out, and messing with the center pin solved the problem? It's close to 5:00 AM, and I kind of took it that you are still having issues even after swapping the battery.. I just may be tired though...
...Board is working great, figure I'll use it for a week or so to make sure nothing's gonna go screwy before I void the warranty on it with a torx driver.
Oh you do .. then can you tell me if the Aqua V2 by Footoon that you carry has the 1st batch shark logo, or 2nd batch Dolphin? I am looking for a 1st batch Aqua with shark
High praise indeed coming from you, Ms. Nikki, thank you for the kind words. Guess it wasn't too awful for a single continuous take, but I had to resist the urge to edit. Course I would've been left with just under 3 minutes of footage if I'd gone through with that.
My new grey mini is gorgeous! Not sure if I'll wrap it after seeing it and holding it. Finish is much smoother than on my black one, almost like a finer media was used to blast it.
Board is working great, figure I'll use it for a week or so to make sure nothing's gonna go screwy before I void the warranty on it with a torx driver.
.. its more impressive that it was a one take as well. I appreciated the lack of "blah blah blah" that too many video reviews have, at least for me. I like the look of the wraps that I have seen, but the gray/silver is quite sharp looking so I don't want to cover it. I've been enjoying the Powerful mode at 20W with my Aqua V2 built to .7. Just switched it up to the Kayfun V4/1.5ohm/16W in standard mode, but still need to play around with this mod and atty to find my sweet spot for this build. I'll check in to that and let you know tomorrow
My inquisitive nature will be the death of me. I figured I should at least go ahead and deprive myself of easy access to the torx screws by doing this:
I've gotta admit, as far as the naked finishes go: If I were buying for the first time, I'd go with grey. It looks really classy. I already miss it, so I'm not sure how long these wraps will last.
