SXmini Q Class Powered by YiHi SX450 Chip Part 2

[jamesthoryoon]

Will this mod be "better" for an atomizer or an RDA. And if someone can assist me with which type of ohm I should look into for my uwell Crown Atomizer.

I currently have their dual 0.25ohm coils and their dual Ni200 0.15ohms.
What temp / jules / watts should I set them both at to get the best flavor and clouds? I don't mind heat. My throat can handle quite the punishment Maybe there's a forum dedicated to the uwell Crown's here on e-cig someone can assist me with? Tried searching.

Also if someone can assist me with an RDA build, I like using two twisted kanthal wires from amazon. They're the pre-made ones from amazon. What temp / jules / watts should I set this for as well?

Any insight or additional knowledge would be greatly appreciated.

 

[Akuma888]

I think someone here pointed out that Q class chip is a bigger brother of SX350J V2, I assume the chip will fire at pulse if you give it a full throttle. Not sure if they will change this in the Q class. We shall know soon enough.

 

[Hyperspace]

Will this mod be "better" for an atomizer or an RDA. And if someone can assist me with which type of ohm I should look into for my UWell Crown Atomizer.

I currently have their dual 0.25ohm coils and their dual Ni200 0.15ohms.
What temp / jules / watts should I set them both at to get the best flavor and clouds? I don't mind heat. My throat can handle quite the punishment Maybe there's a forum dedicated to the UWell Crown's here on e-cig someone can assist me with? Tried searching.

Also if someone can assist me with an RDA build, I like using two twisted kanthal wires from amazon. They're the pre-made ones from amazon. What temp / jules / watts should I set this for as well?

Any insight or additional knowledge would be greatly appreciated.

Here's the Crown users thread. You should be able to get all your answers there.

Uwell Crown

 

[Fictitious Character]

That's good to hear.

Perry said it is about 7.5 ounces with batts. So that is around 212 grams with batts.

 

[Moto-EC]

That is Yihi SX Pure tank?!!! Then IPV SX Pure tank looks so much nicer. Imo.

I think it only holds 2ml of juice which is way low in comparison.

 

[David Grossman]

I am thinking of either getting the Boxer 133 watt dual 18650 or their version that has the YIYI SX450-J chip. any suggestions on vaping in TC on which is better and what are the real differences?

 

[Akuma888]

I am thinking of either getting the Boxer 133 watt dual 18650 or their version that has the YIYI SX450-J chip. any suggestions on vaping in TC on which is better and what are the real differences?

If you wants a mod that comes with presets then YiHi. HCigar does not comes with presets. The only DNA133 that have presets is Think vape 133 box. SDNA and efussion mini comes with presets too but they are DNA200 running on lipo battery packs.

The real difference between these two chips I think they both are really good. You might want to consider DNA75 coming soon too.

 

[Moto-EC]

I found some images of the Q and the Pure at the TPE convention. The Tank looks like it has juice holes rather than the vertical cotton. I hope they can be closed off unlike the P4U tank. Still a very low ml capacity for most of us. Now I cant wait to see the differences if any in the element.

 

[Hyperspace]

The Tank looks like it has juice holes rather than the vertical cotton. I hope they can be closed off unlike the P4U tank. Still a very low ml capacity for most of us. Now I cant wait to see the differences if any in the element.

I'm guessing the element is the same because the P4U description says it's based on Yihi’s exacting technical expertise and technology. The element head says SX Pure on it. Perry says the SX Pure tank is better but I guess only time will tell what's better about it. The way you're talking about the P4U tank in the ML thread makes me think I should have waited for the Pure tank. I'll know tomorrow when I get mine. I'll still buy the Pure when it comes out to see what's better about it. They'll probably release it at the same time as the Q and that's sounds like the end of next month.

 

[Jake67]

I wish I had waited. The P4U isn't a tank I will use at the moment. Maybe with a different resistance coil in it I can learn to use it. As it stands now I tried it cleaned it and it's on the shelf with all the other relics in atty junkyard.


Sent from my iPhone

 

[Stinkytofus]

looks not bad, want a black version lol

 

[jamesthoryoon]

So glad I got the blue. Best part about the cosmetics for the Q is that at least the cases are replaceable.

 

[Tim Jenson]

I found a quick look at the SXmini Q Class on Youtube

 

[Hyperspace]

I wish I had waited. The P4U isn't a tank I will use at the moment. Maybe with a different resistance coil in it I can learn to use it. As it stands now I tried it cleaned it and it's on the shelf with all the other relics in atty junkyard.


Sent from my iPhone

Been vaping on mine for a day now and I have to say I like the tank. The flavor of the juice is better and I like that it has no popping sounds like my Crown has. Just wish the tank held more than 2ml of juice. I'm looking forward to trying the SX Pure and seeing what's better about it.

 

[Moto-EC]

I found a quick look at the SXmini Q Class on Youtube

I guess my ML is expecting a new member in the family! Thanks nice video!

 

[Hyperspace]

More info on the Pure from Perry. According to him the element is different than the X2.

"Those are IPV tanks. The SX Pure is YiHi tank. Having used both the YiHi version blows it away and its not even close. The SX Pure is like dripping... both in flavor and in the huge amounts of juice you consume.. But in all fairness its a new technology. YiHI's heating element is different but the general technology is the same. But they are working together as they have a very close relationship."

 

[jamesthoryoon]

Am I the only one who is getting a bit more impatient with this mod to arrive???? I'm hoping someone here has a strong knowledge in utilizing the programming capabilities with this new chip. I want to set it up for my Crown temperature and can someone please clarify if the new Q comes with an RDA? or an RBA or an atomizer? whats this talk about the Yihi Pure? or whatever that's called.

 

[Hyperspace]

Am I the only one who is getting a bit more impatient with this mod to arrive???? I'm hoping someone here has a strong knowledge in utilizing the programming capabilities with this new chip. I want to set it up for my Crown temperature and can someone please clarify if the new Q comes with an RDA? or an RBA or an atomizer? whats this talk about the Yihi Pure? or whatever that's called.

I've gotten a little impatient waiting and I'm sure others have too. I think YIHI announced it too early. They should have waited to announce it til about a month before vendors would have them. Programming it is easy. It's just like programming the ML class. You can you the presets or custom tailor it to your preferences. It doesn't come with a RDA, RBA, or atomizer. The Pure is a coil-less tank that you can purchase separately. The heating element is said to last 3 months.

 

[smokinGAVIN]

So glad I got the blue. Best part about the cosmetics for the Q is that at least the cases are replaceable.

It is also easier to paint or refinish without the difficult masking or mod dissasembly.

 

[Akuma888]

I've gotten a little impatient waiting and I'm sure others have too. I think YIHI announced it too early. They should have waited to announce it til about a month before vendors would have them. Programming it is easy. It's just like programming the ML class. You can you the presets or custom tailor it to your preferences. It doesn't come with a RDA, RBA, or atomizer. The Pure is a coil-less tank that you can purchase separately. The heating element is said to last 3 months.

Really... 3 months! That's it?!!! And we gotta buy a new tank after 3 months??!!!