Tank-O-Matic Liquinator v4.1

[debb]

Thanks...maybe I will throw it on my Infinity tomorrow as well.....just to try it..

so when you draw on the carto without firing do you hear juice in the carto? Just wondering ...mine sounds so dry...no crackling of juice (when fired) or anything....almost like the juice doesn't feed the carto at times...

 

[Wylie]

I don't draw on the carto usually without firing, but I just tried it and don't hear anything-- just air. When I fire it, it sounds snappy like any other Boge. One thing to watch out for... the carto never becomes saturated like you're used to. The juice feeds into the bottom portion of the cartomizer and vaporizes there. Only the bottom part of the carto gets wet. If you pop the drip tip off and look at it, the top should look dry.

What voltage and resistance are you using? (I've only used the standard resistance)

 

[debb]

lol...I was just looking in the top...it's dry...lol..using lr...ohms say 2.1 tho...

 

[Wylie]

Hmmm, that's what it should be. Ok, let's see what you get tomorrow. Sounds like you may have an issue with either your juice or your atty. Should be plug and vape.

On the airflow, if you want, you can also use a 510->510 connector to lift it off its base (though I don't think it's necessary). And on the Infinity, yes-- that's the one I was thinking of.

 

[debb]

ok...also have a reg resistance to try tomorrow...Thanks for your help, Wylie..

 

[Wylie]

You're welcome. Try it in the morning before changing anything. Maybe the juice is just really, really thick.

 

[MXBNW]

Ok this will this tank take most standard cartos. Or is there a special size

 

[Wylie]

Standard size is best if you're using the standard 3ml tank. If you want to use longer ones (like the dual coils), you should consider getting the dual coil tank-- it's longer.

Here's a post on why:

Page 3: http://www.e-cigarette-forum.com/fo...-o-matic-liquinator-v4-1-a-3.html#post3261495

Basically, the 3ml tank is designed to start and stop at a certain point. But... if you are using a longer than normal cartomizer on the 3ml tank, it still works. Just make your cut higher up on the carto and you should be fine.

 

[MXBNW]

Standard will be good not crazy about the duel coil cartos. I like a good 1.5 or 2.0

how fast is your shipping if I order tomorrow mid morning. I will be picking up two.

 

[Wylie]

I buy mine at the retail shop, so I'm not sure how long it takes to ship. Sorry.

BTW, their LR cartomizers are 2.0Ω.

 

[MXBNW]

cool are they any good do you know who makes there attys.

 

[Wylie]

Cartomizers are Boge 2.0 LR and 3.0 Standard. I'm not sure who makes their atties, I think it's Joye.

 

[debb]

took mine about 6 days, MX..

 

[MXBNW]

That's cool I will place the order in the am.

 

[debb]

working good, Wylie....wasn't the tank...lol..I turned my provari down a volt...tastes great!..I knew it was user error....the concept was fool proof!....just not when a fool gets hold of it...lol

 

[debb]

anybody know if a small hobby dremel will cut the cartos?

 

[MXBNW]

anybody know if a small hobby dremel will cut the cartos?

It should I have used mine on cartos and attys for other projects.

Did you see the Review that Grim Green did on this. I here is the video for all to see. There was also a vid on how to cut the carto and he was using a dremel with a standard cutting wheel.

 

[debb]

thanks mx...I don't know about dremels..so I don't know what kind of power specs to look for....heading out to get one in a few...
BTW..my tank works great!

 

[MXBNW]

Got mine today now to start filling and testing this thing out. I got lots of cartos left over from my carto days

 

[debb]

cool...let me know how you like it....on my second tank now....