TexasT's House
- Thread starter TexasT
- Start date
- th_trl_thread_readers 0
-
- Tags
- mods closet
- Status
Quick in and out is for UTC ?
hmm can't wait for lent to be over.
Hey I been having trouble getting on here all day. now I see all of the "My Posts" are gone. damn.
How's TT today?
How's TT today?
Getting ready to call now. They were fixing the bad server.
As of 18:51 Still working on the problem, looks like a hardware problem with the switch that links the servers.
As of 18:54 Until the hardware issues at the data center are resolved you can expect intermittent outages and reduced functionality.
As of 18:56 They guys at the data center had to do a reboot of the server as part of the emergency maintenance they are performing.
As of 18:54 Until the hardware issues at the data center are resolved you can expect intermittent outages and reduced functionality.
As of 18:56 They guys at the data center had to do a reboot of the server as part of the emergency maintenance they are performing.
Well, Don't they know CPU CPR?
Pump it's hard drive 4 or 5 times and blow in it's USB port.
Pump it's hard drive 4 or 5 times and blow in it's USB port.
Hey Gummy how is it arry can have a tank made with screw caps top and bottom and no leakage from the threads and vision stone outfit on version 3 still has leakage ?
Arry's has delrin threaded caps going into some sort of plastic treated tank on actv3
and
Stainless threaded cap threaded into stainless tank with gasket on threads on Actv4
Not a cheap costing tank but there are no problems with the 2 tanks.
Vision stone had aluminum threaded caps going into plastic tank with gaskets and they leaked bad.
newer version has stainless threaded cap going into thicker plastic tank with gasket and i read some are still having leakage?
I'm glad i dont mess with vision stone tank any more.
Arry's has delrin threaded caps going into some sort of plastic treated tank on actv3
and
Stainless threaded cap threaded into stainless tank with gasket on threads on Actv4
Not a cheap costing tank but there are no problems with the 2 tanks.
Vision stone had aluminum threaded caps going into plastic tank with gaskets and they leaked bad.
newer version has stainless threaded cap going into thicker plastic tank with gasket and i read some are still having leakage?
I'm glad i dont mess with vision stone tank any more.
The 2 stones I had one leaked from the bottom seal there the positive connector goes in. (the other one the wire broke off) I think the difference is in the mass production Chinese thingy. ya get what you pay for.
Its not horrible. They are just back to not knowing what is causing the bleeding.
Hopefully they will see something tomorrow though. TT said that he hopes that they have a wide angle lens 
ah ha,, ok.
How is he doing? up and awake? talking trash with the Nurses? board silly?
How is he doing? up and awake? talking trash with the Nurses? board silly?
Yeah Gummy similar here i had 5 total tanks 2 diff versions and nothing but problems.
At first it was great then the leaks started on them right where the thread meet the tank, then after a while from foilling the tank and screwing on that top cap the ce2 would spin and break the fragile soldered wires which i resoldered on one of my good tanks then that particular tank sprung a leak right at the threads.
I quit fussing , still have a tank or 2 brand new but not useing them.
I did make suggestion several times prior that a permamnet 510 connector in bottom cap would be nice or a machined cap with o-ring where a ce2 could pop in and out.
Instead when version 3 came out the used a type of screw post for the ce2 a grounding spring and another type of spring on the post where they then soldered the wires to and mention now the ce2 will not spin and break the wires.
So its a proprietor thing your forced to buy there replacememts, and that were that also a problem cause they said "oh we will have replacement innards , thats when version one first hit the market but they finally came out when version 3 hit the market and then said well the replacements are on a limited run and once there gone there gone.
Its a shame but i moved on from this game.
But i was not happy how they did all this.
Too much junk in those tanks and your absolutely right when you say
You Get What You Pay For.
Well most of the time hopefully.
Its a throw away society nowadays.
At first it was great then the leaks started on them right where the thread meet the tank, then after a while from foilling the tank and screwing on that top cap the ce2 would spin and break the fragile soldered wires which i resoldered on one of my good tanks then that particular tank sprung a leak right at the threads.
I quit fussing , still have a tank or 2 brand new but not useing them.
I did make suggestion several times prior that a permamnet 510 connector in bottom cap would be nice or a machined cap with o-ring where a ce2 could pop in and out.
Instead when version 3 came out the used a type of screw post for the ce2 a grounding spring and another type of spring on the post where they then soldered the wires to and mention now the ce2 will not spin and break the wires.
So its a proprietor thing your forced to buy there replacememts, and that were that also a problem cause they said "oh we will have replacement innards , thats when version one first hit the market but they finally came out when version 3 hit the market and then said well the replacements are on a limited run and once there gone there gone.
Its a shame but i moved on from this game.
But i was not happy how they did all this.
Too much junk in those tanks and your absolutely right when you say
You Get What You Pay For.
Well most of the time hopefully.
Its a throw away society nowadays.
- Status
Similar threads
