Not to be a cheap azz but I had to give some friends to the dollar tree so I thought why not go in where it's cool. Anyway I ran into these cell phone cases with a belt clip. I bought one and my Billet Box fit perfect.
~The Billet Box~ page 1559 continued...
- Thread starter Doug Dino
- Start date
- th_trl_thread_readers 0
- Status
Not to be a cheap azz but I had to give some friends to the dollar tree so I thought why not go in where it's cool. Anyway I ran into these cell phone cases with a belt clip. I bought one and my Billet Box fit perfect.
What a great buy.
Got my Rev4B today and not sure I like the looks of the large screen plate. There is something about the engraving that I really like.
Now on a plus side it is ready for a DNA60
Sent from my SM-G935T using Tapatalk
Aww man! Tell me that's an option and not a new revision! I like the BB engraving on the plate!
Sent from my Commodore 64 using Tapatalk
Soooo... I got my Uno in the other day and after the oring confusion I set it up today to see how it works! All I can say is:
"Man Oh Man!!!!" This thing is fantastic! After the In'Ax Carto heartache/aneurism (I could NEVER get that thing working right) I thought I would be tied to cartos or BVC coils forever! I'm so glad I found a ReBuildable that works and works great!
I built a 2.5mm 11 wrap 28g micro coil which came out to 2 ohms. It fits perfectly with room to spare. If anyone's rebuilt the old Protank coils, this thing is a breeze to build! I put a bit thicker wick in it than I usually would for a 2.5mm coil just to insure it wouldn't leak, and it wicks like a champ!
With both airflow adjustment orings installed it's still a bit airy for my taste (a touch more airy than the Bridge) but it's nothing I'm concerned with. It performs great!
If you don't have one of these already it's a GREAT RBA! I'm just glad I got it for the Vapeocolypse!
Sent from my Commodore 64 using Tapatalk
"Man Oh Man!!!!" This thing is fantastic! After the In'Ax Carto heartache/aneurism (I could NEVER get that thing working right) I thought I would be tied to cartos or BVC coils forever! I'm so glad I found a ReBuildable that works and works great!
I built a 2.5mm 11 wrap 28g micro coil which came out to 2 ohms. It fits perfectly with room to spare. If anyone's rebuilt the old Protank coils, this thing is a breeze to build! I put a bit thicker wick in it than I usually would for a 2.5mm coil just to insure it wouldn't leak, and it wicks like a champ!
With both airflow adjustment orings installed it's still a bit airy for my taste (a touch more airy than the Bridge) but it's nothing I'm concerned with. It performs great!
If you don't have one of these already it's a GREAT RBA! I'm just glad I got it for the Vapeocolypse!
Sent from my Commodore 64 using Tapatalk
Last edited:
So where did you get it?Soooo... I got my Uno in the other day and after the oring confusion I set it up today to see how it works! All I can say is:
"Man Oh Man!!!!" This thing is fantastic! After the In'Ax Carto heartache/aneurism (I could NEVER get that thing working right) I thought I would be tied to cartos or BVC coils forever! I'm so glad I found a ReBuildable that works and works great!
I built a 2.5mm 11 wrap 28g micro coil which came out to 2 ohms. It fits perfectly with room to spare. If anyone's rebuilt the old Protank coils, this thing is a breeze to build! I put a bit thicker wick in it than I usually would for a 2.5mm coil just to insure it wouldn't leak, and it wicks like a champ!
With both airflow adjustment orings installed it's still a bit airy for my taste (a touch more airy than the Bridge) but it's nothing I'm concerned with. It performs great!
If you don't have one of these already it's a GREAT RBA! I'm just glad I got it for the Vapeocolypse!
Sent from my Commodore 64 using Tapatalk
Got myself a plain silver this morning (not the Piebald). I actually feel a little guilty since I just got a Fawkes last week - but I'm done now and can just enjoy them knowing I'm all set now. 
Vapeocolypse preparedness? Haha
Now I just need an Uno.
Sent from my SM-N920V using Tapatalk
Vapeocolypse preparedness? Haha Now I just need an Uno.
Sent from my SM-N920V using Tapatalk
Last edited:
Nice!
Sent from my SM-N920V using Tapatalk
@HBcorpse !
I give you permission to call me ______ or a ________ing ________...
So... The second hand BB Rev3 I was using was handicapped with my build/etc. I was using the hybrid drip tip pictured below with my Nautilus kit... So..... Yeah... Air was seeping in at the connection point between the drip tip and the Nautilus adapter. So not only was air seeping, but the connection probably wasn't as solid as it should have been either...
I was wondering why the vape seemed so cool, and not as satisfying as it should have been... LOL.
I threw the brass adapter back in there and it changed the whole experience. (I bought it second hand and that hybrid tip was installed on it when I opened it, and I didn't think anything of it and/or didn't know what I was doing when I out the Nautilus adapter I bought in.
So... Yeah... I now have 2 Rev4's and a Rev3 (that I was going to sell) - but not anymore... Haha
I feel... A little like a word I can't say on the forum. Lol
Sent from my SM-N920V using Tapatalk
I give you permission to call me ______ or a ________ing ________...
So... The second hand BB Rev3 I was using was handicapped with my build/etc. I was using the hybrid drip tip pictured below with my Nautilus kit... So..... Yeah... Air was seeping in at the connection point between the drip tip and the Nautilus adapter. So not only was air seeping, but the connection probably wasn't as solid as it should have been either...
I was wondering why the vape seemed so cool, and not as satisfying as it should have been... LOL.
I threw the brass adapter back in there and it changed the whole experience. (I bought it second hand and that hybrid tip was installed on it when I opened it, and I didn't think anything of it and/or didn't know what I was doing when I out the Nautilus adapter I bought in.
So... Yeah... I now have 2 Rev4's and a Rev3 (that I was going to sell) - but not anymore... Haha
I feel... A little like a word I can't say on the forum. Lol
Sent from my SM-N920V using Tapatalk
@HBcorpse !
I give you permission to call me ______ or a ________ing ________...
So... The second hand BB Rev3 I was using was handicapped with my build/etc. I was using the hybrid drip tip pictured below with my Nautilus kit... So..... Yeah... Air was seeping in at the connection point between the drip tip and the Nautilus adapter. So not only was air seeping, but the connection probably wasn't as solid as it should have been either...
I was wondering why the vape seemed so cool, and not as satisfying as it should have been... LOL.
I threw the brass adapter back in there and it changed the whole experience. (I bought it second hand and that hybrid tip was installed on it when I opened it, and I didn't think anything of it and/or didn't know what I was doing when I out the Nautilus adapter I bought in.
So... Yeah... I now have 2 Rev4's and a Rev3 (that I was going to sell) - but not anymore... Haha
I feel... A little like a word I can't say on the forum. Lol
Sent from my SM-N920V using Tapatalk
Stanley...
I'm not gonna shake my head, or face my palm...
I'm just gonna pull my rear end out of my pants, point it at you, fart, and say "Neener neener neener!"
Hahahaha!!!
It IS a bit odd that you're having that air leak with the hybrid tip to the Nautilus Bridge...
It's probably why you thought the vape was so airy as well!
My hybrid tip (appears to be the same one) has no issues connecting flush to the top of the Nautilus Bridge.
Maybe try it on your BVC Bridge?
You may find you like the BVC Bridge better in the Rev 3! Despite my loyalty to the Nautilus coils, I've grown quite fond of the BVC (Shut it DP! You're still in the fake dog house over that Zen comment!)...
Anyway...I hope you're really enjoying that Rev3 now!
I kept trying to tell you...
Saw this a couple days ago, forgive me if it's been posted already. Coming soon from Ohman...If I'm not mistaken, that is a supertank coil, which means it should fit any Atlantis style coil. I'm hoping that is the case, love the .9 vaporesso ccell coils!
Posted with the pictures: " You didn't think I was finished with billet box did you??!??
Llikely won't make any deliveries by the 8th so....
We Shall call this one. Ohmans Hot Tank (aka kangaroo tank )
Will include tank body and needed parts to make this happen.
I've been asked a long time for this. Even today while in the middle of prototyping the parts."
Posted with the pictures: " You didn't think I was finished with billet box did you??!??
Llikely won't make any deliveries by the 8th so....
We Shall call this one. Ohmans Hot Tank (aka kangaroo tank )
Will include tank body and needed parts to make this happen.
I've been asked a long time for this. Even today while in the middle of prototyping the parts."
Just had a thought, due to fda does it mean we won't get any new revisions of the billet box?
Damn it, I should have grabbed a piebald when I had the chance, I was holding out for a dna 60 but that's very unlikely I guess! I was hoping even without a USB the dna 60 could come pre installed with the profiles for ss etc, heck even a Billet box logo could have been uploaded before being installed in the BB.
Damn it, I should have grabbed a piebald when I had the chance, I was holding out for a dna 60 but that's very unlikely I guess! I was hoping even without a USB the dna 60 could come pre installed with the profiles for ss etc, heck even a Billet box logo could have been uploaded before being installed in the BB.
All I know is you guys are making me regret not going for Ratbald or piebald instead of the classic clear/silver with the black g10 and button.
Oh well - I'm sure I'll love the one I got! I LOVE my Fawkes much much much more than I expected too.
Sent from my SM-N920V using Tapatalk
Oh well - I'm sure I'll love the one I got! I LOVE my Fawkes much much much more than I expected too.
Sent from my SM-N920V using Tapatalk
I just took a quick picture of my Rev 3a BB's, the 4 on the left I have to set up yet.
KAS
KAS
I just took a quick picture of my Rev 3a BB's, the 4 on the left I have to set up yet.
KAS
Brilliant I love them all.
Brilliant I love them all.
Thanks, I would still like to get a few more, The pic doesn't really show the wear on number 5 & 6, but they do have the a lot of marks. I was going to take some more close up pic's, but I spent the weekend re-bottling nicotine.
KAS
Here is another with the picture cropped, I like this a bet better.
Last edited:
I just took a quick picture of my Rev 3a BB's, the 4 on the left I have to set up yet.
KAS
What are their names?
[emoji23][emoji23][emoji23][emoji23][emoji23]
- Status
Similar threads
- Locked
- Locked
