~The Billet Box~ page 1559 continued...

[DougFNJ]

HB's method is exactly how I do it. Curious for fellow nautilus coil fans....anybody get a percentage of coils that are not threaded right leading to the setup being too long top to bottom to fit in the tank? Any fixes?


Sent from my iPhone using Tapatalk

 

[Katdarling]

Between @DPLongo22 's 'splanation and @HBcorpse 's pics, I say WOW! Good job, boyzers!

However, the maniacal insertion is too much for me. I prefer the BVCs any day.

 

[NGAHaze]

the maniacal insertion is too much for me

 

[DPLongo22]

^ What he said ^

 

[TheSneakerHoarder]

So I dropped in the smaller chimney on the Flow. With no AFC it is a restricted DL pull. I date not use the AFC as it will be tighter than a ducks ..... Still, great flavor and nice heat. As of today with 10 different builds in it the Flow is the most forgiving atty yet. No downsides other than the postless build that takes a little more time.

Sent from my SM-G935T using Tapatalk

 

[MsLoud]

So I dropped in the smaller chimney on the Flow. With no AFC it is a restricted DL pull. I date not use the AFC as it will be tighter than a ducks ..... Still, great flavor and nice heat. As of today with 10 different builds in it the Flow is the most forgiving atty yet. No downsides other than the postless build that takes a little more time.

Sent from my SM-G935T using Tapatalk

Sorry if it's been asked and answered but....does it fit the BB Rev3.a?

Thanks!

 

[HBcorpse]

Sorry if it's been asked and answered but....does it fit the BB Rev3.a?

Thanks!

I don't have one, but after my experience with trying to put the Exocet and Insider in a Rev3 Boro, I would guess no.

The Rev4 Boro tank's bottom hole is dead center in the tank, whereas the Rev3 Boro tank has an offset.

That's why the Exocet and Insider don't fit quite right.

 

[MsLoud]

Well that's ok. I still have my 2 Sophia v2s waiting on rev3.a

Sophia v2 wont fit in the rev4 - too long. Real disappointing - glad I love the Exo so much!

The Flow looks like it took the best of both the Insider and Exo and pushed it over the top with a post-less deck. Reminds me of the Nuppin.

 

[ToolmanTexas]

Well that's ok. I still have my 2 Sophia v2s waiting on rev3.a

Sophia v2 wont fit in the rev4 - too long. Real disappointing - glad I love the Exo so much!

The Flow looks like it took the best of both the Insider and Exo and pushed it over the top with a post-less deck. Reminds me of the Nuppin.

@MsLoud, there are 3 lengths of the Sophia V2s, 35, 45 and 50mm... which one do you have?

 

[MsLoud]

@MsLoud, there are 3 lengths of the Sophia V2s, 35, 45 and 50mm... which one do you have?

I have the all - I bought 2 complete sets. The 35mm should have fit but it doesn't - even when the Sophia liquid control is screwed all the way down. When you unscrew it to open up the liquid control, it's too long and stick up so that the 510 nut sticks up.

Broke my heart it didn't work on the rev4 but I have been told it will work in the rev3 Boro. Also I've seen pics of the Exocet working in the rev3 Boro - one side of the wick is against the wall of the Boro and the other side you leave the wick sticking out. I'll give it a go when my rev3s get here the end of the week. Have a few new Boros I ordered that should get here about the same time.

 

[ToolmanTexas]

I have the all - I bought 2 complete sets. The 35mm should have fit but it doesn't - even when the Sophia liquid control is screwed all the way down. When you unscrew it to open up the liquid control, it's too long and stick up so that the 510 nut sticks up.

Broke my heart it didn't work on the rev4 but I have been told it will work in the rev3 Boro. Also I've seen pics of the Exocet working in the rev3 Boro - one side of the wick is against the wall of the Boro and the other side you leave the wick sticking out. I'll give it a go when my rev3s get here the end of the week. Have a few new Boros I ordered that should get here about the same time.

That stinks that none of the Sophia's work on the Rev 4!!

 

[MsLoud]

So another quick question. I watched the video on the Aspire BVC Billet Bridge and notice you can change out the coil easy by pushing it through from the top - I still have a few Battlers (woot for old school stuff you thought you would never have a use for and forgot about!).

I have a few packs of the Aspire Nautilus BVC coils and the Bridge for it - will it fit in the rev3 Boro tank? I imagine you can not change the coil like the original BilletBridge (Aspire BVC) because of the "flange".

 

[HBcorpse]

So another quick question. I watched the video on the Aspire BVC Billet Bridge and notice you can change out the coil easy by pushing it through from the top - I still have a few Battlers (woot for old school stuff you thought you would never have a use for and forgot about!).

I have a few packs of the Aspire Nautilus BVC coils and the Bridge for it - will it fit in the rev3 Boro tank? I imagine you can not change the coil like the original BilletBridge (Aspire BVC) because of the "flange".

The Nautilus Bridge was released before the Rev4, and it definitely fits the Rev3 Boro.

You are correct in that it does not have an easy coil change process.

The coil change process is simply the reverse of the installation process.

 

[HBcorpse]

Odis Flow Ti atty available on WicksandWires right now.

Got my purchase in.

I really want to pull the trigger on this...

But two things are making me hesitate.

1. Will my order be confiscated or sent back due to the FDA doomings?

2. Wicks And Wires isn't listed as an authorized reseller on the Odis website...and neither is the Flow atty!

 

[TheSneakerHoarder]

I really want to pull the trigger on this...

But two things are making me hesitate.

1. Will my order be confiscated or sent back due to the FDA doomings?

2. Wicks And Wires isn't listed as an authorized reseller on the Odis website...and neither is the Flow atty!

I have ordered from w&w did many times no matter what shipping method I've always gotten my stuff. Odis is lazy about updating their vendor list. W&w is legit. Best atty so far.

Sent from my SM-G935T using Tapatalk

 

[TheSneakerHoarder]

I'll just put this out there...if anyone buys one and doesn't like it, I'll buy it off of you (limit 1 as I only need 2 total).

Sent from my SM-G935T using Tapatalk

 

[AlphaGuitarist]

I ordered the Insider from Wicks & Wires and, other than the package sitting in the Chicago USPS distribution center for a week, the process was problem-free. With regards to the possibility of orders being confiscated, is this something that's been happening recently?

 

[HBcorpse]

I ordered the Insider from Wicks & Wires and, other than the package sitting in the Chicago USPS distribution center for a week, the process was problem-free. With regards to the possibility of orders being confiscated, is this something that's been happening recently?

It hasn't happened to me yet (knock on wood) but as time moves forward, I keep waiting for the first time.

It's not a matter of IF, it's a matter of WHEN.

Unless vendors are willing to mark their packages as containing "cosmetic plastic and metal parts", these packages run the risk of being "searched and seized" by customs, etc.

I'm hoping the W&W packaging is "plain clothes" and has no labeling to give it away...so it can fly under the radar.

 

[AlphaGuitarist]

It hasn't happened to me yet (knock on wood) but as time moves forward, I keep waiting for the first time.

It's not a matter of IF, it's a matter of WHEN.

Unless vendors are willing to mark their packages as containing "cosmetic plastic and metal parts", these packages run the risk of being "searched and seized" by customs, etc.

I'm hoping the W&W packaging is "plain clothes" and has no labeling to give it away...so it can fly under the radar.

This is one of the main reasons why I've been pulling away from pre-built coils and opting for RTAs. When the dooming (love the term, by the way!) fully kicks in, sourcing pre-built coils will undoubtedly become problematic.

With regards to W&W's packaging, it was a plain padded envelope with a printed shipping label. Based on my prior experience with them, you should be good to go. In fact, I'm considering picking up the Odis myself. I like the Insider quite a bit, but it's extremely unforgiving when it comes to wicking; I'd like something that requires a bit less attention.

 

[HBcorpse]

This is one of the main reasons why I've been pulling away from pre-built coils and opting for RTAs. When the dooming (love the term, by the way!) fully kicks in, sourcing pre-built coils will undoubtedly become problematic.

With regards to W&W's packaging, it was a plain padded envelope with a printed shipping label. Based on my prior experience with them, you should be good to go. In fact, I'm considering picking up the Odis myself. I like the Insider quite a bit, but it's extremely unforgiving when it comes to wicking; I'd like something that requires a bit less attention.

Thanks for the words of encouragement and the compliment!

Hoping there's one Odis Flow left by Thursday...aka PAY DAY MOTHA TRUCKAAAAAS!!! [emoji383][emoji383][emoji385][emoji385][emoji383][emoji385][emoji383][emoji385][emoji383][emoji384][emoji385][emoji385][emoji384][emoji384][emoji385][emoji385][emoji383][emoji383][emoji384][emoji388][emoji383][emoji383][emoji383][emoji385][emoji385][emoji387][emoji387][emoji387][emoji387][emoji184][emoji184][emoji184][emoji388][emoji385][emoji384][emoji388][emoji383][emoji385][emoji385]

It's too bad all that loot will be this: [emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389][emoji389]

Adulting SUCKS!!!