~The Billet Box~ page 1559 continued...
- Thread starter Doug Dino
- Start date
- th_trl_thread_readers 0
- Status
C'mon now, DP deserves the orange - it appears made for him!
@DPLongo22 - I'll try and get one for ya!
C'mon now, DP deserves the orange - it appears made for him!
@DPLongo22 - I'll try and get one for ya!
Awwwwww..... thanks, F2V!
But please, if you were to be so fortunate, name it after me (if you REALLY want to), but do be vaping on that beauty yourself, for years to come.
L'Orange II. The Sequel.
Had no doubt that it would
Was sure of that as well
that's what I'm sayin, but he can't get it for another week, so someone's gotta sit on him til thenC'mon now, DP deserves the orange - it appears made for him!
Had no doubt that it would
Was sure of that as well
that's what I'm sayin, but he can't get it for another week, so someone's gotta sit on him til then
Well I first built 1 coil with the 30 Ga. for my sabot with a horizontal coil, and got a 2.2 OHM coil, it works but the flavor is muted. Then I tried one for the BVC with the long leg made with 30 Ga NR wire, it did not work out the OHM's were to low. Finally I made another one, 12 wraps of 30 GA Kanthal with the NR wire coming right off the top of the coil, to end up with a 2.4 OHM coil, a little high but that will work. I am tired of messing with coils right now, but I want to try one for my sabot next, to see if a vertical coil will improve the flavor on those.
KAS
KAS
gotta hand it to ya for your perseverance! Do you enjoy tinkering with stuff like this, or is it kinda a pain, but ya just gotta get it exactly how ya want it? I'm not a tinkerer. Lemme find something I like, and I'll stick with it for years.I am tired of messing with coils right now, but I want to try one for my sabot next, to see if a vertical coil will improve the flavor on those.
I just want to figure out how to build the original BVC coils as they were originally made, I don't like the new ones and just want to have another option. I tried the coil that I made last night, I still have some work to do, the wick is blocking the air flow, but at least I know now how to build the coils.
KAS
My UNO is out for delivery
Sent from my SM-N910V using Tapatalk
I haz, I haz, I haz!
Just competed the 'Special Order' for my V4... Seriously doing a happy dance!
Shipping notice!!!!
My GAWD! You can really DANCE, dude!!!
Huge congrats! Need I say we need pics?
Oky Doky.My GAWD! You can really DANCE, dude!!!
Huge congrats! Need I say we need pics?
After some searching I think the ceramic paper I am looking for is also called kiln paper.
KAS
i looked and looked and couldnt find the 1/4 inch wide 50ft roll of the exzact same looking stuff we take out of the aspire/nautilus coils...dangit i wish id have book marked it.i tried but this was as close as i came and idk if its the same thing that comes out of an aspire/nauti.
also if you get the old coil out and take the burnt paper off then dryburn it while you have it on the drill bit that fits it you can reuse the factory coils.ive bneen doing it for a few years.i use a pipe cleaner to get the burnt stuff off and it works great.been rewicking the horizontal subtank coils for a while also.
ya just have to clean the inside of where the coil is with a qtip to get the gunk outta there.takes some trial and error but it does work.sorry for the long post.hope this helps ya and yerah you may ruin a few but you will get it right after some trying and its satisfying to get them redone and reuse them for sure!!
Amazon.com: Microwave Kiln Paper for Glass Fusing 10 Sheets
Last edited:
if you need one LMK.they give a more airy vape then the aspire bridge but if you add lil orings to where the pin end is its supossed to slow down the air some.pm if you want.they both work great but ST coils are almost a lunghitter for a BBox...did it for me anyways....opps sorry i didnt read all the way.my mistake...DISREGARD
Last edited:
the screen is the coolest thing ive heard so far and way easier to mess with then the crimping wadding up the paper does some...errr most of the time.lol.
I have no idea, but there is no way the original stuff, that was in the original BVC coils was toxic.
KAS
Yes, I agree that the stuff in the BVC is not toxic. I just meant that stuff in the link may be.
- Status
Similar threads
- Locked
- Locked
