Ya I can , it is not going out until Monday , remember this is a prototype ! no guarantees that it will work the way you want it to !
Let me know ! ASAP
Let me know ! ASAP
The " BUZZ " VariVolt Pv's coming SOON !
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
Buzz You da man. I got my buzz today and it look like my house is on fire hehe. Too much smoke vaper coming out my ears.LoL
I got an adopter from madvapes a few week ago 901/808 bat to 510 atty and it work fine with my 510 cartomizer. I dial it up al ittle bit and it hit better than my 5v box mod. I didn't have any problem with airflow, But I I did have a problem with a much better TH LoL. I'm loving this thing.
Thanks again BUZZ for the BEST vape I ever Had.
I got an adopter from madvapes a few week ago 901/808 bat to 510 atty and it work fine with my 510 cartomizer. I dial it up al ittle bit and it hit better than my 5v box mod. I didn't have any problem with airflow, But I I did have a problem with a much better TH LoL. I'm loving this thing.
Thanks again BUZZ for the BEST vape I ever Had.
Go for it. If it doesn't work the way I like it I send it back and have you replace the connector. My cost of course.
OK , I will try to not scratch the top cap but NO Guarantees!! I really do not have the right setup to do this correctly and not scratch anything .
Ok we will find the correct hole size eventually ( Hell I guess I could measure a 808 battery hole ? )
DONE ! shipping Mon.
Ok we will find the correct hole size eventually ( Hell I guess I could measure a 808 battery hole ? )
DONE ! shipping Mon.
Last edited:
I used a ruler...
my battery has 2 holes and they measure in at just under 1mm diameter each (the hole fits between the 2 lines on the ruler...). maybe not exact science, but it's a starting point
my battery has 2 holes and they measure in at just under 1mm diameter each (the hole fits between the 2 lines on the ruler...). maybe not exact science, but it's a starting point
I read somewhere on ECF where you can file straight across the top of the connector to accomplish the same result.
LOL I dug out my V4L 808 batteries, some have two holes, some have 3, some the holes are bigger than on others. No set design on these things.
The short adapter I just got yesterday has slots down the sides of the threads on two sides, no holes. Hmmmm now that's interesting and I like how it works.
Gotta love the uniform designs. Makes your life so easy Mike
The short adapter I just got yesterday has slots down the sides of the threads on two sides, no holes. Hmmmm now that's interesting and I like how it works.
Gotta love the uniform designs. Makes your life so easy Mike
I think i remember reading that too, way back when...
if i recall, they used a dremel tool with a cut-off wheel
Oh YA I love the consistency of design LMAO !
It all works out in the end , usually just trade offs here and there .
Like the batteries being loose , well If I did not do that then certain batteries would NOT fit so ???
It all works out in the end , usually just trade offs here and there .
Like the batteries being loose , well If I did not do that then certain batteries would NOT fit so ???
Well the way you did the batteries is great since everything fits! I'm sure you'll get the hole issue down pat too
I understand that, I've got quite a few batteries that are the exact same, same maker even, and the diameters are different. so I just work around that problem. felt or muleskin works perfectly for killing battery rattle.
Cool Jag !
I just tried the 808 connector I made today ( hole in the side ) and used a 901 atomizer , the air flow was killing the hit , to much air !
So I put a rubber O -ring around the 901 connection and WALA Great hit is back ! so If you get a 808 top cap use an O-ring ( I have some ) when using a atomizer .
I sent some with Harpos unit and WItchways test top
I just tried the 808 connector I made today ( hole in the side ) and used a 901 atomizer , the air flow was killing the hit , to much air !
So I put a rubber O -ring around the 901 connection and WALA Great hit is back ! so If you get a 808 top cap use an O-ring ( I have some ) when using a atomizer .
I sent some with Harpos unit and WItchways test top
I'm a pure carto person, I tried carts for a while, and no bueno, so I went back to cartos,
Regular carts I will never use again. I like cartos for the ease, especially when out and about or very busy working. However, my true love will always be dripping on a pen style atty. There is just something about vaping freshly dripped juice on the right atty at the right voltage that is blissful and relaxing and oh so tasty
Ok I made the DRIPPER available online .
$14.95 , ( I gotta pay myself LOL )
I dont have any velcro dots ( for attaching it ) right now I will get them ASAP
On order !
$14.95 , ( I gotta pay myself LOL )
I dont have any velcro dots ( for attaching it ) right now I will get them ASAP
On order !
Last edited:
I just made a version of the 808 with a slot across the threads and that work good to !
So I will be trying different ideas along the way
well the SLOT seems to be the trick ! easy to do and if you use an O-Ring to seal the slot you can use atomizers.
So I will be trying different ideas along the way
well the SLOT seems to be the trick ! easy to do and if you use an O-Ring to seal the slot you can use atomizers.
Last edited:
I just received my Buzz and have a question about using a voltage adapter to measure it as I adjust the voltage. I purchased a digital multimeter from Amazon and the voltage adapter sold by notcigs.com, but I do not get any reading when I try attaching the leads from the adapter (screwed into the Buzz) to the leads coming out of the multimeter -- just a blank screen. The multimeter itself may be defective or maybe the adapter has a loose connection, but I want to make sure I am not doing something wrong. Everyone else seems to know how to use a voltmeter to test e-cigs, so please help this technically-challenged newbie with some instructions. Thanks!
I just got mine today also and tested it, everything works good. I didn't have an adapter for testing but I set the meter to 20 and put the red wireof the meter to the center of the 901 and the black wire to the outside and press the button like you're vaping and the meter should read what the volt are set at. HTH I'm not that experience with electronic but this I do know. Happy vaping.
Are you getting any indication that the multimeter has good power (battery), like does anything happen when you simply turn it on?
- Status
