The Crown Variable Wattage/Voltage Module

[forcedfuel50]

Hey David,

Has there been any word from Artisan vaping?

Cheers,
Abe

Just emailed for an update, will status when i find out...

 

[rojo]

John Pinkney mentioned elsewhere today:

There'll be a ton in stock next week. Got 400 boards coming in.

And the Crown goes up to 12 watts, if you use it in VV mode.

Figure another week to ship from Canada to Minnesota? And a day or two after that to add the inventory to the website, depending on whether you're working on my ELA when they arrive? <grin>

 

[forcedfuel50]

Yep, same thing i found out today, thanks Rojo!

 

[coho72]

I just realized we were out. I will inquire on stock status and let you know.

Hey David , not to bust your coconuts but it's been a bit , any word from artisan on those "beeping" crowns?

 

[Riverboat]

Im very impressed with the Crown.... 8 hours of vape time and not a single misfire +1 recommened...

 

[LadyMaMa]

Hey David , not to bust your coconuts but it's been a bit , any word from artisan on those "beeping" crowns?

I was wondering the same thing. I asked him for an update this morning. We should hear something from him soon.

Susan

 

[Riverboat]

I also feel Im getting longer run times with the Crown vs the Kick....both using a AW 18490 IMR set @ 10 watts.....
Plus the Crown is shorter then a Kick so if you use it in an ELA it keeps it more compact...

 

[vaptamist]

I think the crown has a lower cutoff voltage

 

[Riverboat]

I think the crown has a lower cutoff voltage

That makes sense then....

 

[forcedfuel50]

The current status is we are just in a holding pattern. I have an order in and they are trying to get a batch of Crowns finished to fill our order. I'll post up as soon as they are on the way. It shouldn't be too much longer now.

 

[Riverboat]

Good you can sign me up for a 2nd Crown.........

 

[d3mon]

Good you can sign me up for a 2nd Crown.........

and me...for a first.

 

[OnTheFidele]

Thanks for the update, David.

 

[Riverboat]

Snork can you tell me one more time how to switch a Crown fro VW to VV.... I cant find your post where you told me.... Thanks

 

[snork]

Make sure it's unlocked, then 6 beeps & hold.
When in volts mode it adjusts in .2 volt increments up and down. To hear the volt setting 3 beeps and hold - low beeps indicate whole volts, high beeps indicate fractions, e.g.
BEEP BEEP BEEP BEEP beep beep beep = 4.3 volts.
make sure to lock it when done.

 

[Riverboat]

Thanks Snork......

 

[Riverboat]

Question.... Since the Crown has a 5.5 voly limit... If set for VW if an atty reads 3.2 ohms like the new 3.0 HH I have(They start off higher sometimes) will it still be able to produce 10 watts? For a 3.2 ohm atty it needs about 5.7 volts to produce 10 watts...

Edit.... Actually My Crown goes up to 5.6 volts....

 

[snork]

I believe it will. I also believe it will do 5.5 volts on a low ohm atty.

 

[Riverboat]

Heres my problem.... My Crown was working perfect for 19 days.... Then I put on a new 3.0 HH atomizer on it... It was in VW mode set at 10 watts/checked it=10 beeps.... I started to vape and noticed that the vapor was weak... Hmmm so I put the atty on my Provari set at 5.5 volts=10 watt vape... Great vapor, working perfect... So I put an inline voltage tester on the Crowned ELA set at 10 watts... Only delivering 4.3 volts with a 3.0 ohm atty attached(thats not enough volts to deliver 10 watts..needs to be 5.5 volts)... Ok so next I put the Crown in VV mode set at max 5.5 volts... No load, the inline tester reads 5.6 volts, under load and it only drops to 5.4 volts with the 3.0 ohm HH = 9.72 great vape...
So why would it work perfect in VV mode and not be working correctly in VW mode.... Im going to e-mail SuperT about this problem and see if there is a warrenty.......

Just to let you know I have Mastered the Crowns operation so there is no user error with this issue and the HH357 atty reads @ 3.0 ohms when checked on my Provari....... Inline voltage tester is also working perfect....It was checked on my provari set at 5.5 volts=5.5 volt reading...

 

[snork]

There is a warranty.
Rather than Super-T, I'd go to artisanvaping.com | Home of the Ego Booster and register your purchase. Then deal direct with them. I emailed them once, took a few days but got a great response.