The Darwin From Evolv!!!

[alexp843]

Usually puts them up at 6pm...my guess

 

[kingcobra]

Guess I won't be getting a t-shirt

Thanks for the responses, the thing is, I have 5 ego-t LR atties on the go which also consists of my entire hardware collection so right now that's pretty important to me I'm too cheap to set the stuff aside Naturally you can't vape under the watts from a standard battery, the idea was to look to cook things up a bit with the Darwin, so I'm not concerned about not being able to go below 8. I'm pretty damn satisfied now with my ego battery with the LR but they have been telling me I will graduate to mods one day and my resistance has been lessened I guess I need something where I can see how much juice is in the thing thus the tanks, I guess I could get a 510-t but what the heck am I going to do with all these atties is the thing.

So they won't last forever and when I'm down to my last couple, then maybe I could set them aside, so my next question is abouot whether you can swing the thing with a 510-t atomizer on it, which is smaller I take it.

 

[Credo]

Guess I won't be getting a t-shirt

Thanks for the responses, the thing is, I have 5 ego-t LR atties on the go which also consists of my entire hardware collection so right now that's pretty important to me I'm too cheap to set the stuff aside Naturally you can't vape under the watts from a standard battery, the idea was to look to cook things up a bit with the Darwin, so I'm not concerned about not being able to go below 8. I'm pretty damn satisfied now with my ego battery with the LR but they have been telling me I will graduate to mods one day and my resistance has been lessened I guess I need something where I can see how much juice is in the thing thus the tanks, I guess I could get a 510-t but what the heck am I going to do with all these atties is the thing.

So they won't last forever and when I'm down to my last couple, then maybe I could set them aside, so my next question is abouot whether you can swing the thing with a 510-t atomizer on it, which is smaller I take it.

I've used regular (Not LR) eGo T atties on the Darwin. I personally wouldn't push them past 3.7v....they do pop easily at anything over 4v if they get the slightest bit dry.

 

[Krisb]

Hi all! Just back from the meet! Had a great time Wish everyone who said "they should be able to make it" did, but apparently I'll have to do a RSVP next time!

First pic is me on your left on pamdane on the right. Second is the infamous Paul of evolv.



Sent from my ADR6300 using Tapatalk

 

[Krisb]

First has Brandon in the far middle, to his left (your left) is Drew.

Second has darkfalcon standing up. Vchick behind him and Heather (Brandon's wife) across from her.

Sent from my ADR6300 using Tapatalk

 

[Krisb]

And..... THE MONKEY!!



Sent from my ADR6300 using Tapatalk

 

[nanovapr]

Guess I won't be getting a t-shirt

[snippage ensues}

Hi Kingcobra, I started the joke here, that "I read the whole 600 pages of the Darwin thread before I ordered". Yet, I see that KrisB has the Real Deal!

I had to throw out my whole former thinking about LR versus High Voltage versus VV. With Darwin you set a preferred heat range (best expressed in Watts). As your atty or carto ages, Darwin constantly adjusts the voltage compared to the resistance, to make it like you want it. My best experience is with higher resistance 'Heating Thingies'. LR will suck more amperage, shorten the battery life, and will not provide a better experience.

I like it because I can swap parts around, and it remains the same. The multi-day battery is a good thing, also. I charge it every other night, whether I need to or not.

 

[Krisb]

Yes, Nano... I read the entire Darwin thread and I got a t-shirt

Sent from my ADR6300 using Tapatalk

 

[Panky]

Guess I won't be getting a t-shirt

Thanks for the responses, the thing is, I have 5 ego-t LR atties on the go which also consists of my entire hardware collection so right now that's pretty important to me I'm too cheap to set the stuff aside Naturally you can't vape under the watts from a standard battery, the idea was to look to cook things up a bit with the Darwin, so I'm not concerned about not being able to go below 8. I'm pretty damn satisfied now with my ego battery with the LR but they have been telling me I will graduate to mods one day and my resistance has been lessened I guess I need something where I can see how much juice is in the thing thus the tanks, I guess I could get a 510-t but what the heck am I going to do with all these atties is the thing.

So they won't last forever and when I'm down to my last couple, then maybe I could set them aside, so my next question is abouot whether you can swing the thing with a 510-t atomizer on it, which is smaller I take it.

The 510-t atty works just fine on the darwin. You won't want the LR one unless you already have it though It is just a bit annoying to use with the ego-t atty on it. I think you have to keep the arm at a 90 degree angle with it.

 

[Pamdane]

I loved trying these. I couldn't believe the vapor! It's awesome. If you've been thinking about it- do it. It's like nothing I've tried before. Volts and mAh just dont cut it. This melds them together and just smother things out. Nothing burns, it's smooth and mellow.

 

[Chornbro]

Sent from my ADR6300 using Tapatalk

What are those little thingies attached to the juice bottles?!

 

[lowboy]

I would call then dripper bottles.
Make for drippers...............LOL
You take the cap off and put that ring on the bottle. Put cap back on. Then if you drip you just remove the small cap drip and then replace small cap. Don't have to worry about screwing the larger cap back on. Great ideal.

 

[kingcobra]

The 510-t atty works just fine on the darwin. You won't want the LR one unless you already have it though It is just a bit annoying to use with the ego-t atty on it. I think you have to keep the arm at a 90 degree angle with it.

OK thanks, I'm looking for some kind of tank system to use and I definitely would be going with regular 510-t atties. I would like to have the thing work like it should though and it won't fit in the pocket with the arm at 90 degrees. No way I'm using filler type deals though and I'm too lazy to drip so it's got to be a tank So thanks for everyone who has given their advice and it seems I've got something to try now.

 

[Panky]

I would call then dripper bottles.
Make for drippers...............LOL
You take the cap off and put that ring on the bottle. Put cap back on. Then if you drip you just remove the small cap drip and then replace small cap. Don't have to worry about screwing the larger cap back on. Great ideal.

I've been trying to find something like that because it is a pain to unscrew the cap every time I want to drip. I would like to have a flip-top bottle or something for one handed operation

 

[otrem]

the gooseneck i think would work well with ego t attys. ( using Darwin).

 

[Katdarling]

Ahem. Pinata???? Donde esta the monkey pinata??

Looks like it was fun! Thanks for the pics, Krispy!

 

[lowboy]

Panky
Look in your hobby stores/shops. I have seen them around here.
At least that is where I think I saw them.
This sometimers disease is killing me.

 

[lowboy]

Krisb

You need to give us names of who is in your pics.
Forum names that is..................................

 

[Chornbro]

I would call then dripper bottles.
Make for drippers...............LOL
You take the cap off and put that ring on the bottle. Put cap back on. Then if you drip you just remove the small cap drip and then replace small cap. Don't have to worry about screwing the larger cap back on. Great ideal.

So.. it's sole purpose is to keep you from having to take the cap off the bottle every time you need some drops? Weird...

 

[Katdarling]

Not sure I understand it actually. Is it just so that you do not lose the larger cap? It's a tether?