The Darwin From Evolv!!!
- Thread starter Drewsworld
- Start date
- th_trl_thread_readers 0
- Status
Finally finished the threadJust took a week. undlike2no2 Got some duel coils cartos already. More of an atty person myself. Have any atty recommendations? Just ordered a couple new ones to try out.
Not really I don't like the fuss and muss of using an atty but what I do like and is clean as hell is the Vortex after I mod them, its like dripping clean and tasty. I am waiting for more to come out they are my fav and I hope they fix them. I even use it to drip for tasting juices mainly like this:
I saw on a couple of forum's back someone cut down a vortex and used it for dripping. I thought i was a grate idea so i tried it. I didn't cut it down i just took the inner tube out used 3 drops 1 in center and 2 down the sides. This worked grate it fills around sides and doesn't over flow you can see everything and wicks grate. What I found out is if your testing juices this is way better than the attys because when you are down there is no metal taste and u take outer tube off and a fast dry burn and its clear of all juice ready for the next 3 drops Now i can test juice all day and get it clean every time and fast.
Dunno if the next batch will allow this...but if you like DIY at all it isn't hard to wind yourself a new coil
No solder or anything like that required.Nhaler actually has Ato-mizer kits that'll take alot of the guesswork out of ordering nichrome wire and silica ropes and stuff.
Hey Avideditor,
The reason they all dont say Custom made is that half of them I inroduced to the Market....Including the LR , and HV lines of atomizers...SO when I started selling them they really werent avaiable anywhere else....The LR attys on My site are Cisco's, which is who owns Avid Vaper....AS far as the price of those they are $9.00 with 5% off coupon they are $8.55... I think Cisco sells his for $8.99 and also offeres coupons from time to time... They are head and shoulders above the rest and clearly the best on the market....I worked with, and watched Cisco work on these for almost a year in the developement process...
Low Resistance Atomizers (901, 306, 510 and 801)
All my attys LR and HV are made with Spec NiChrome and are NOT made by SLB...I could, and have, had attys made by other companies that I could sell for less but have found that they just dont hold up that well...I do sell cheaper generic 306s on my site for $7.00 but if you try them you will see a distinguishable difference in performance.
Low Resistance 306 Generic Atomizer
And the Joyes for $8.00
Low Resistance 306 Joye Tech Atomizer
But I cant get the good ones cheap...
I recently had another round of Custom atomizers made specifically for use with the Darwin and some other VV devices that offer more rugged performance as well as a unique airflow that is pretty impressive.
306 Atomizers
http://shop.nhaler.com/510-Custom-Atomizers-510customatty.htm
I try my best to introduce the latest designs with the best quality and dont always have everything thats out there right away , but I almost always have the ones that are actually working, in the highest quality I can find.
Thanks for your interest in my products...I apreciate it.
Drew
The reason they all dont say Custom made is that half of them I inroduced to the Market....Including the LR , and HV lines of atomizers...SO when I started selling them they really werent avaiable anywhere else....The LR attys on My site are Cisco's, which is who owns Avid Vaper....AS far as the price of those they are $9.00 with 5% off coupon they are $8.55... I think Cisco sells his for $8.99 and also offeres coupons from time to time... They are head and shoulders above the rest and clearly the best on the market....I worked with, and watched Cisco work on these for almost a year in the developement process...
Low Resistance Atomizers (901, 306, 510 and 801)
All my attys LR and HV are made with Spec NiChrome and are NOT made by SLB...I could, and have, had attys made by other companies that I could sell for less but have found that they just dont hold up that well...I do sell cheaper generic 306s on my site for $7.00 but if you try them you will see a distinguishable difference in performance.
Low Resistance 306 Generic Atomizer
And the Joyes for $8.00
Low Resistance 306 Joye Tech Atomizer
But I cant get the good ones cheap...
I recently had another round of Custom atomizers made specifically for use with the Darwin and some other VV devices that offer more rugged performance as well as a unique airflow that is pretty impressive.
306 Atomizers
http://shop.nhaler.com/510-Custom-Atomizers-510customatty.htm
I try my best to introduce the latest designs with the best quality and dont always have everything thats out there right away , but I almost always have the ones that are actually working, in the highest quality I can find.
Thanks for your interest in my products...I apreciate it.
Drew
Last edited:
Shoot me an email at DGliem00@gmail.com (thats double zero) and I will send you something...I have around fifty of the Vortex cartos left from my samples that I turned down. They are not assembled and have 2 different kinds of rubber tips...I didnt like either of them...Dont get me wrong I loved the way they vaped and all , but couldnt figure out how to stop them from leaking and cracking...I have some new samples coming this week , as I have been working with the Engineer on these since I was in China...I have turned down 4 versions so far , so Im hoping 5 will be the charmer...Thanks
DRew
OK Credo what do you know that we don't on these Vortex's are you saying they will not come apart lol 8( well that might not be a bad thing if they don't leak at all
The last run didnt leak but they were like sucking a golf ball through a garden hose...If you hit them hard enough they were great, but you would probably faint after the 3rd or 4 th hit!!!LOL...They are supposedly working hard to get them finished...
Drew
Last edited:
Thank that sounds grate was waiting on the new ones so i hope you get ones that I can get from you when they fix them.
I am out of them to mess with so that would be grate.
Drew btw you don't have a drive up do you or is it all mail, I travel a lot.
No Drive Thru yet?!?!? That sounds like a great idea though!!! lol...I'll ship em tommorow though and you will have them pretty quick...Thanks
Drew
Drew
Thanks Drew for the info. I am sure you have the highest quality products with reasonable prices. I have the HV 306 one in my cart right now I am just curious about these ones. Your HV 510 HV 901 and the HV 801 11 bucks each one and they don't say custom on them. HV atties are the best with the darwin? Just wondering if these last long, have a good taste, and have nice vapor production. I am new to the darwin and really impressed. Just want to make as informed decision as possible because my bank account is now hurting but my lungs are thanking me.
I am just curious about these ones. Your HV 510 HV 901 and the HV 801 11 bucks each one and they don't say custom on them. HV atties are the best with the darwin? Just wondering if these last long, have a good taste, and have nice vapor production. I am new to the darwin and really impressed. Just want to make as informed decision as possible because my bank account is now hurting but my lungs are thanking me.
Thanks Drew for the info. I am sure you have the highest quality products with reasonable prices. I have the HV 306 one in my cart right now
Avideditor - atty's are sort of like juice. You need to try a few before you find which one really floats your boat. Me I am partial to the 306's. I have them in LR and HV and I have them from many places including nHaler. I can attest to what Drew has posted previuosly and have found with atty's you certainly get what you pay for. In my gear box I am sitting on well over 75 different atty's and I keep going back to the LR 306's (1.5 and 2.0 ohm versions). Around 50 of my stock is in the 306 version. The atty you fall in love with will deepend on how you like your TH, flavor and vapor. I have found the 801 and 901's to be big on flavor but a little to cool for my liking. We all know the 510 and the HV version will last longer than the standard but the hit and flavor will be basically the same. The 306 is the sweetspot for me since it is the warmest vape of them all and provides monster TH but it will mute flavors. I hope that helps a little
I guess so. I have over 100 juices. Looking to get more atties now to try out with my darwin. Because I find it works better with with higher Ω atties and most of the atties I have now are low Ω. Is that what you found with the Ω number? Just wished some placed sold atty sampler packs Guess I will slowly find the one for me. Just shipping costs add up Thanks for you input.
Guess I will slowly find the one for me. Just shipping costs add up Thanks for you input.
Last edited:
Like it. Atty sampler packs!
Guess who's nic'd out right about now (on an LR 306, btw, and an LR 510).
Nooo, baby, you can't have the ring back.
Guess who's nic'd out right about now (on an LR 306, btw, and an LR 510).
Nooo, baby, you can't have the ring back.
I guess so. I have over 100 juices. Getting looking to get more atties now to try out with my darwin. Because I find it works better with with higher Ω atties and most of the atties I have now are low Ω. Is that what you found with the Ω number? Just wished some placed sold atty sampler packs
Yes AE the higher ohm stuff will work well on the Darwin. Do you have any standard resistance stuff (you know the 510's that came w/egos) at say around 2.8 ohm. You can breath new life into them by dialing up the watts. For the Darwin I have been pretty much running cartos at 8.4 to 9 watts. The Dual coil ones Drew carries are really nice and even though this is an nHaler thread some of us have been using the Iken V2's and 801 fusions with much success. The "big gulp" that Drew has also fires great on the Darwin. I am sort of an overzelous dripper and the Darwin is not very forgiving when it comes to overdripping therfore 99% of the time I have a carto on the unit. Happy vapes and I can not believe you read the whole thread. Now be careful these ladies here have a tendancy to draag you into the gutter if you are not careful.
Like it. Atty sampler packs!
Guess who's nic'd out right about now (on an LR 306, btw, and an LR 510).
Nooo, baby, you can't have the ring back.
Well then the new toy is bringing it huh??? You are happy with it?? I just knew you would love it. It is so you. BTW - If you don't stop trying to marry Parralex then we will need to go to counseling
LOL, Avid, you're safe.... sort of
No you are not she has the blue winky thing out, next comes the red .... hat and I am afraid to type the rest
- Status
