The Evel One

[908Tracy]

Lmao!! I'm with you Bov. DID's, rba's, T3's....I'm like huh?

Just give me my BP, M1A1, and some Boges and I'm a happy girl!!!

Of course it wouldn't hurt to find out what those things are and if we are missing out on something perhaps? lol

 

[FranC]

rba is a rebuildable atty

 

[908Tracy]

rba is a rebuildable atty

Ah!!! Thanks for clearing that up for me Fran! So RBA's are solely for dripping then?

 

[FranC]

Not exactly but some. A T3 is a 3ml clearo tank with a replaceable bottom coil.

 

[Bovinia]

Fazed just put up a vid on how to rebuild the T3 if you are too cheap to buy replacement coils

 

[El Dee]

The re-buildable atty....My newest obsession...

Most are 510 connection tanks. The top of the tank has a center post that is your positive connection with a ground connection off to the side. There is also a hole for filling and a wick hole on top of the tank. You can use several materials for the wick...I'll be using stainless steel mesh...You gotta cut the mesh to size, oxidize by burning it and finally roll it into a tube. Then you gotta wrap a coil from the ground, around the wick and terminate at the positive connection..Your coil wrap determines your resistence. Daunting at first but when you have the system down you're golden. From that point you will need only mesh and wire. When I was here last the RBA was only mentioned by members I viewed as technical wizards...I'm thinking they are taking this thing way to far...then Nick Grim Green asked me if I'd tried one...I saw the vapor coming off that thing and the hunt was on. I said the Hades with the tank and carto....The Buzz is sporting a Joye 510 and a way sexy lime green Ming...I should have got a link but I didn't..Go to Phiniac Glass and look at the Cobra atomizer or google DID Atomizer and check it out...MMAVapors or something similar. I can't wait to blast that thing....

 

[Wharf Rat]

I just got my #500 mesh in today LD.... feels like silk.... not kiddin'..... MY HF torch died, got to get a new one. I'll let you know.

 

[FranC]

Fazed just put up a vid on how to rebuild the T3 if you are too cheap to buy replacement coils

I will buy the replacement coils thank you!!

 

[El Dee]

That's what I'm saying Fran. Looks like a bit much when the replacements aren't that expensive and most say they last about a month. I saw one fellow replace the silica wick with stainless mesh. That too IMO was a bit much as being a bottom feeder it should have no issues feeding juice too the coil. The only issue I've got with T3s is the Ego connection. My Buzz meets the dirt often so adapters would increase the possibility of failure. As I stated earlier the new vapors have much better choices. An Ego VV sporting a T3 wouldn't be so bad..Maybe the BuzzKillah should look into an Ego top cap..

Wharf I read the 500 mesh thread...Free wicking from a jar it was by far the best and should work without tipping...Well maybe a tip when you're needing some stress relief...Due to my chosen occupation I've got the big daddy butane torch already....butane though.....giving my DID has a ways to go I should have no trouble getting some butane on hand. Wharf I've read that many leave out the fill plug in order to improve wicking. 500 should improve this as would leaving a bit of head room in the tank...Do you install the fill plug or run it without?? I'm planning on running the DID at all times and would really like to keep the fill hole plugged....

 

[FranC]

No RBA's for me Dee. I'm not real mechanically inclined. FYI I did pick up a couple 1300Mah ego Spinners. They work very well.

 

[Wharf Rat]

I have a ZAP ZAG and a ss Line LD, and they have a 1mm? fill hole. I would leave the screw in the fill on the DID. It looks like the DID has a good size wick hole and I don't get the sense that there's any restriction of wicking with the RBA's I've seen. All these will leak though if they are left on their side.

 

[FranC]

You just left me way behind Wharf. LOL

 

[908Tracy]

And I'm even farther behind in Frans dust!!! lmao

 

[Wharf Rat]

..........

 

[908Tracy]

lol

 

[El Dee]

Wharf now don't hold me to this...I'm thinking you can wick outta either hole allowing the wick to be on the bottom when vaping...I hold my pv so the fire button is around 11 o'clock. I know some RBAs give that choice. The ZAP I know doesn't because someone was complaining about it..I'll be needing a ZAP at some point myself...Kinda like the lottery there with having cash on hand when stock is available. I've a satin black/blue led unit that the ZAP was made for on the way here now..USPS LowPriority Mail...SMDH..Then you got the customs thing with the DID that still hasn't shipped...Correct me if I'm wrong but I don't imagine much illegal stuff is coming here outta Greece....I'm hoping it doesn't get stuck...Would also be nice to see it start it's journey. I got 2 sheets of 500 in there...measured in cm...that's a crap shoot for me so I just got 2...

Is the EGO Spinner VV??? How do you charge it???...I was thinking about picking up an EGO for those T3s. Hey you never know when there could be a pv crisis RIGHT??? and those T3s look easy peasy...There's a vape shop near here and he sells EGOs..He's also sent word my way several times about buying my joose....Maybe I'll drop in...

Man the life of a born hustler...Last week I cut a sheet ton of wood with my new saw...I rented a wood splitter yesterday that was supposed to be back by 5 today. It was 4:30 when I found I'd locked my keys in the truck...the truck with the splitter behind it...So I broke into my shop...pulled out my favorite metal finishing hammer and a magnet attached to a 4 ft extendable antenna...to the truck I go. Now 2 weeks back a dang turkey had flown into my windshield...it's caved in...I pulled the duct tape off the small hole and enlarged it a bit with the hammer. The magnet at full extension was about 1/2 inch short...Ain't that priceless...Fingers in the glass a little deeper and whabamm!!!! I called in my dilemma and got a pass until 8:30...guess I'll be up all night cause there ain't no possibilities I'll be getting up that dang early. Two days of splitting wood and I'm feeling it. If I'm able I'll stack and rack the wood tomorrow...A break is coming in the weather and I got another coat of stain to get on a ladies deck....Then I gits PAID!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! For my next trick I'll be needing an assistant....


The Pyrex SS hybrid Wick ............. Seen this Wharf??? In the modding section should the link not work..........It didn't........

 

[Bovinia]

Wharf now don't hold me to this...I'm thinking you can wick outta either hole allowing the wick to be on the bottom when vaping...I hold my pv so the fire button is around 11 o'clock. I know some RBAs give that choice. The ZAP I know doesn't because someone was complaining about it..I'll be needing a ZAP at some point myself...Kinda like the lottery there with having cash on hand when stock is available. I've a satin black/blue led unit that the ZAP was made for on the way here now..USPS LowPriority Mail...SMDH..Then you got the customs thing with the DID that still hasn't shipped...Correct me if I'm wrong but I don't imagine much illegal stuff is coming here outta Greece....I'm hoping it doesn't get stuck...Would also be nice to see it start it's journey. I got 2 sheets of 500 in there...measured in cm...that's a crap shoot for me so I just got 2...

Is the EGO Spinner VV??? How do you charge it???...I was thinking about picking up an EGO for those T3s. Hey you never know when there could be a pv crisis RIGHT??? and those T3s look easy peasy...There's a vape shop near here and he sells EGOs..He's also sent word my way several times about buying my joose....Maybe I'll drop in...

Man the life of a born hustler...Last week I cut a sheet ton of wood with my new saw...I rented a wood splitter yesterday that was supposed to be back by 5 today. It was 4:30 when I found I'd locked my keys in the truck...the truck with the splitter behind it...So I broke into my shop...pulled out my favorite metal finishing hammer and a magnet attached to a 4 ft extendable antenna...to the truck I go. Now 2 weeks back a dang turkey had flown into my windshield...it's caved in...I pulled the duct tape off the small hole and enlarged it a bit with the hammer. The magnet at full extension was about 1/2 inch short...Ain't that priceless...Fingers in the glass a little deeper and whabamm!!!! I called in my dilemma and got a pass until 8:30...guess I'll be up all night cause there ain't no possibilities I'll be getting up that dang early. Two days of splitting wood and I'm feeling it. If I'm able I'll stack and rack the wood tomorrow...A break is coming in the weather and I got another coat of stain to get on a ladies deck....Then I gits PAID!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! For my next trick I'll be needing an assistant....


The Pyrex SS hybrid Wick ............. Seen this Wharf??? In the modding section should the link not work..........It didn't........

I'm lookin for a second job...and I'm built Ram tough

 

[FranC]

The Ego Spinner is VV Dee.

 

[908Tracy]

Oh ElDee, you crack me up!!! I just love reading your adventures!!!

 

[Wharf Rat]

I just bought some 2.5 & 3 mm OD Pyrex. Looks promising though Dan didn't look like he was blowin' plumes but worth a try as it would solve lots of hassles. Thanks for the heads up LD