Status
Not open for further replies.

Bovinia

Divine Bovine
ECF Veteran
Jul 17, 2010
14,449
50,826
65
South Carolina
At least if you (me too) are too lazy to rebuild the T3, you can just pop a fresh replacement coil in it. I was finding last night that as a chain vaper, I get a dry, sorta burnt tasting hit every now and then, even tho I turned the voltage down a bit. It's a cooler vape than I'm used to. With my tanked Fusions, I vape my caramel cocnut cookie at about 4.6, on the T3 I've had to adjust down to about 4.3 to keep it from tasting burnt. I'll keep playing with it...I want to see how long I can get out of this coil.

The up side is fabulous vapor, and a nice draw that I like. Easy as heck to fill for me since I use a spike cap on my main mix bottle.

micro_tip_set_b3.JPG=450
 

El Dee

Ultra Member
ECF Veteran
Verified Member
Apr 1, 2010
1,700
12,261
65
DIXIE
Bovina I got one of those "Slap Ya Momma" tools as well....Pretty dang sure that's where the credit card fiasco occurred....Still a good tool for keeping the o-rings in the tanks happy...didn't take the Chinese long too copy it either...

I picked up a set of bottles in varying sizes with blunt syringe tips...they have attached silicone caps...They work good and came in 5/10/15ml...My favorite I picked up whilst ordering nicotine...Holds 30ml and the syringe is a bit larger...It fills a carto tank or the T3 lickity split...

The T3....I'm pretty dang sure I've been running 4.2 and less...Guessing it's me but it seems too like more voltage and then less too produce the same amount of vapor...Sounded like bacon frying when I hit it on carto level!! Still it's rocking though I switiched out too the DID last evening. Given the fact a coil for the T3 is @ the same cost wise as a carto...Add in it's easy too fill...Performance IMO is better than a carto...The T3 is a winner...BTW it's still working...My cartos can last anywhere from not at all too @ 5 days for a record setter...Nothing quiet like filling a carto and inserting it into a tank filled with juice too find out it's a DUDLEY...

Be it known I'm a coil wrapping fool extraordinare.....that dang thing is purdy!!!!!!!!!! Now I've read wick thread after wick thread...Seems everyone has a wick that works well for them..My fat wick was with a juice that did not play well in the DID..The one in there now is pretty dang fat as well...but...it's gonna get even fatter...I've learned that a quick tilt before vaping will make it rock and roll..The flavor rivals the Joye atty...I'm sure it will be my go too device soon...Maybe I should get off my .... and mix some juice...Genious Jones concocted up 120ml of StrawNanna....because like "this wick is the bomb"....StrawNanna was also someone's idea of the bomb...well at least it burns clean...unlike that meh carmel I had too have...If it's crap it's crap...Thinking of venturing back too my roots and concocting an RY4..

I was sitting around talking with an old friend earlier tonight. He was smoking Camels...Let me tell you cigarettes make me feel sick...The chemicals or something I just can't take it...Thank you baby Jesus!!
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
At least if you (me too) are too lazy to rebuild the T3, you can just pop a fresh replacement coil in it. I was finding last night that as a chain vaper, I get a dry, sorta burnt tasting hit every now and then, even tho I turned the voltage down a bit. It's a cooler vape than I'm used to. With my tanked Fusions, I vape my caramel cocnut cookie at about 4.6, on the T3 I've had to adjust down to about 4.3 to keep it from tasting burnt. I'll keep playing with it...I want to see how long I can get out of this coil.

The up side is fabulous vapor, and a nice draw that I like. Easy as heck to fill for me since I use a spike cap on my main mix bottle.

micro_tip_set_b3.JPG=450

i have those too and two brand new replacement heads with coils and wick laying next to it but I just can't get the vapor and flavor like I do from my tanked fusions. I do have one set up on my Infinity with a different flavor in it that I puff on now and then. I like switching off so I don't get burnt out on one flavor or device. I'm currently vaping on a vv box mod I built a long time ago that is so broken up from dropping it that it's held together with masking tape and rubber bands but it still works so darn good. I got to build a new box for it if I ever get time. I started to twice. As far as filling them I got a device I made that works great. I filled one while driving one day. Like I said I devise ways to make vaping as easy as I can.

El Dee This carto I'm using now is on week 5. I've never had one last that long.
 
Last edited:

El Dee

Ultra Member
ECF Veteran
Verified Member
Apr 1, 2010
1,700
12,261
65
DIXIE
Dang I just got off a thread where they're throwing out conductivity tests of various metals.....I fully understand wanting an all mechanical mod...I also understand the big advantage of VV. Nothing quiet like polishing your brass too restore a lost connection...I sold that sucker.....

From memory the Fusion is an 801/510 hybrid...I got Fusions here...Just never really found much success with them and I much prefer the 510 connection. I need too order a short tank as the Fusions are short and too my knowledge don't come in XL. All my Fusion experience came before tanks arrived on the scene...They're vintage!!!!!!!!!!!!!

My wick seems too be performing better with a little age...A clean burning juice makes all the difference...No noticeable difference in the coil/wick after a few days...Vapor production is on par....flavor is on par with the 510 atty...I got a Boge in the tank with the gummy burning carmel juice...Given I've been mostly using the T3 and DID but the Boge has some age on it now and is still rolling vapor...No way will it last 5 weeks..........
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
They do come in Xl and Pre-punched LD oh and soon a 510 version. I've been using a prototype 510 fusion in a 6ml. tank for 5 weeks and it still out performs anything I've tried but it does work best on a Buzz or Infinity Pro. The brass does corrode fast. That's why gold is so high because of electronics using it. Silver is another one they're trying so they can cut costs. Your right on the juice too. I always use clean juice too and stay away from the darker ones.
 
Last edited:

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
I emailed Mike and talked to him about the lower voltage and dry hits on the T3, and I'll share his advice...and the obligatory snicker that I'm sure will follow ;)

"Blow into it a couple of times to prime it before you hit it...and pull on the wicks a little for thicker juices." :laugh:

No, I'm not kidding!
I had an old lady that used to do that.:facepalm:
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
I can see that I'm going to have to seal this adapter, but the priming is helping. I just took my tweezers and pulled the wicks out a tiny bit too, we'll see how it goes.

Fran, I have the Black 'n Milk loaded in it :) Never in a million years would I have expected to fall in love with a tobacco flavor!
You want a great tobacco flavor try Isaacs Tobacco Gold. It tastes more like the real deal than anything I've tried. I go back and forth between that and V4L Traditional Tobacco so my taste buds don't get flat.
 

FranC

Long time vaper.
Supporting Member
ECF Veteran
Verified Member
  • Oct 1, 2010
    195,630
    646,193
    New Hampshire
    Bov I'm a dunce. I forgot to tell you......unscrew the base coil unit from the T3. You will see a little plastic cap that sits above the wicks. Just pull it up a little off the wicks or take it right off and turn it around.If you turn it around be careful when cleaning not to lose it cause when you take it apart it will probably stay on the long tube.
     
    Status
    Not open for further replies.

    Users who are viewing this thread