The FastTech Thread for All FastTech Posts (Part 2)

Status
Not open for further replies.

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
Howdy FasTechiens, long time no stressing over asian tracking. Time to take the plunge again. I have my order all set but I would like to add a nice basic 18650 flashlight. I don't know flashlights and trying to search through FT is a nightmare. I would like one that is fairly bright, does flood and zoom and a high and low and wont break the bank. That's all I really want. Any other features are just fluff. I'm not looking to get in to modding or any thing. I had a cheap light I got from FT about 4 years ago but they don't carry it any more. I just want something like it or better.

I was looking at this light or for something similar

$9.41 Cree XM-L T6 3-Mode 975-Lumen Zooming LED Flashlight - 1*18650 / with clip / beam range 500m at FastTech - Worldwide Free Shipping

Any suggestions?
Here is the one I ordered
$9.09 UltraFire SH98 1*Cree XM-L T6 3-Mode 910LM Cool White LED Flashlight - black / 1*18650 at FastTech - Worldwide Free Shipping

Just stumbled across this though
Same thing with a charging port!?
$19.14 SIPK K118 1*Cree XM-L T6 3-Mode 900LM Zoom Cool White LED Flashlight - black / 1*18650 at FastTech - Worldwide Free Shipping
1657200-11.jpg

1657200-8.jpg

only issue I see, is the daggum artifact rings (that could be due to the LED not being centered in their demo model)...uggh!!!

I have subsequently build my own driver (used a fellow flashlight afficianados open source PCB from OSHPark) and replaced the crappy Hi/Lo/Strobe with a Nanjg 105C style driver that I flashed custom firmware (I had to strip the components off the Nanjg to solder em to the board), it now has Turbo (wide open) with automatic fallback to high after 2 min, high, med, low (and no more crappy flashies or blinkies! [and it has low power alert/shutdown])
topa_zps08135b8b.jpg
 
Last edited:

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
absolutely LOVE the floating pin on the stingray.

comparing it to the nemmy again

Nemmy:
Ok, you want to change atomizers on your nemmy. Unscrew top cap, back off center pin, flush mount atty with pin, screw back on top cap, then fix battery rattle.

Stingray
want to change atomizer? back off switch on bottom, screw on atty, then screw switch back on. done

no removing caps of any kind. it's effortless
 

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.

Thanks for the comeback WH. I got antsy and placed my order. I went with the one I posted ($9.41 Cree XM-L T6 3-Mode 975-Lumen Zooming LED Flashlight - 1*18650 / with clip / beam range 500m at FastTech - Worldwide Free Shipping). It appears to be pretty much identical to the one you list, only a few cents more . I like the idea of an on board charger a lot but don't like the switch placement on the unit you listed. I see it getting turned on accidentally if it is rolling around the tackle/tool/glove box.
 

jp_cfc09

Super Member
ECF Veteran
Verified Member
Aug 5, 2013
302
191
lost
My Fasttech order shipped March 6, via Singapore Post. Tracking shows Despatched Overseas. But when I plug the tracking number into USPS, it still only ever says "origin post preparing shipment". Is this normal?

Sent from my Nexus 7 using Tapatalk


Seems singopore post are messing about everyone lol, im in the same boat too mate and if you cheek the fasttech forums under shipping theres loads. Seems mostly all orders that dispatched overseas on the 5th, 6th and 7th havent arrived yet, a few are saying they are starting too but mines hasnt yet. Thats one long a.. flight lol, 18 days and counting from dispatched overseas. :):)
 

puchox

Super Member
ECF Veteran
Verified Member
May 2, 2013
658
828
42
Montevideo, Uruguay
Seems singopore post are messing about everyone lol, im in the same boat too mate and if you cheek the fasttech forums under shipping theres loads. Seems mostly all orders that dispatched overseas on the 5th, 6th and 7th havent arrived yet, a few are saying they are starting too but mines hasnt yet. Thats one long a.. flight lol, 18 days and counting from dispatched overseas. :):)

One order i made on 3/18 using SGP with another vendor just got sent back to him :S idk
 

Jerms

Vaping Master
ECF Veteran
Jan 1, 2011
9,252
25,832
Fargo
Received my 2014 SS Astro clone today. It's a smartly designed mech that works in many configurations. Top cap has a very cool design, which is engraved well instead of laser etched like the 2013 brass/SS mix option at FT. Brass floating pin isn't too tight and works well. The locking ring isn't reverse threaded like the previous batch of this listing, but with the knurl it's easy to grasp and works well.

There's a couple fairly minor issues. It looked pretty clean when it came, but a good cleaning and polishing revealed a fair amount of hidden much and improved the switch and threads. The threads are good, not great. There's a handful of sharp edges and imperfections in the threading, which is pretty common with clones. The switch has a nice short through and is good, but I'm not 100% happy with it. I'll get the magnetic upgrade which may improve it for me.
 

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
72
Williamsport Md
The Fasttech Nemesis are like any other nemesis clone. They're hard hitters with wonky switches. The best clone Fasttech has is the M16 and it's not close. Though I am curious to get the Stingray.

You would be totally agitated if you used my FT Brass Nemesis for a day. Very low v-drop and the switch truly is butter smooth.

Both my orders are now in acceptance at HKP - Moving along ahead of expected shipping dates(2 days early)
I think China is close to business as usual again.
 

Sucker_dad

Ultra Member
ECF Veteran
Verified Member
Oct 3, 2013
1,009
944
topeka, ks, USA
Well, my order was shipped on the 3rd of march and made it to the US in 11 days. Fastest any order has made it over yet for me. Now the USPS has held it in Chicago for 7 days and apparently are going to take a U.S. tour before they ship it to KS. It has left Chicago and been scanned in Michigan and now Ohio. So, someday it may make it to KS just not this day.
 
Status
Not open for further replies.

Users who are viewing this thread