The FastTech Thread for All FastTech Posts (Part 2)

[GinnyTx]

ok so a couple weeks ago I decide for two drip tips to give fast tech another chance..check this out..

posted 10 days ago
by Cherry Staff
During packaging, we discovered that the item SKU 1959811(1 pcs) we were about to ship you is lacked because that we had mistaken the stock.

Please note that the status of your order is displayed as packaging in the system, but actually it is not available now. Your order will be shipped once this item is restocked. A shipment notification will be sent to you when it is shipped.

Please let us know if you have questions about this arrangement. Thank you.
About your order #A11$$$%%

I'm done with their "mistaken" and weeks on weeks to get you the WRONG freaking product!! it was 7 last time..and who knows how long this time..or what was sent..if they can't even get drip tip orders right? I'm not trusting them with more...CREDIT my account and I'm DONE!

 

[aikanae1]

I'm getting frustrated with everything that I want never showing "in stock" anymore. Usually most products do eventually show up (often more than the 7 days they initially promise) otherwise I'd say they are showing "ghost" products to attract more customers.

 

[bussdriver]

I've got a recent order in with a couple mods, some RTAs, and a fair number of accessories.

My biggest worry is that they can get everything out before this Chinese New Year party gets underway!

 

[KTMRider]

I've got a recent order in with a couple mods, some RTAs, and a fair number of accessories.

My biggest worry is that they can get everything out before this Chinese New Year party gets underway!

Chinese new year is Feb 19.

 

[boomerdude]

Does anyone know if FT has a Marquis clone yet? If so, what are they calling it?

 

[InTheShade]

Does anyone know if FT has a Marquis clone yet? If so, what are they calling it?

Alibaba has the 1:1 clone right now, I don't think FT has it yet. Keep stalking the new arrivals, I am sure it'll be released soon enough.

 

[Nailz]

DOVPO GX-200 Mechanical Mod came today from fasttech, ordered on 12/6, so not bad at all for this time of year, and this looks a lot nicer than the pics on fasttech

 

[KTMRider]

Got my Hana mini clone ordered 11/20. There was a 7 day wait and then pushed another 5 days. Took 12 days from when it was marked shipped to arrive.

 

[b.m.]

DOVPO GX-200 Mechanical Mod came today from fasttech, ordered on 12/6, so not bad at all for this time of year, and this looks a lot nicer than the pics on fasttech

These things are nice.I got one a few weeks back that i won here in a contest and love it.That's funny though,you even have the same batteries i got for mine haha.

 

[freedomfighter]

Lazy and tired build my KF coil just order this

Pre-made Wires and Wicks for Atomizer (50-Pack)
Pre-Coiled Wires for Rebuildable Atomizers (50-Pack)

and some spare for my KF
Replacement Tank Section for Kayfun 3.1 / Kayfun Lite
Replacement Polycarbonate Tank for Kayfun 3.1 / Kayfun Lite

got some saving money after xmas need suggest is cloupor mini is good ? or should i am wait Kamry mini20W?
Thanks

 

[freedomfighter]

after saw your post i Got this one too today hope is working well for my SMPL Thanks

I posted a few days ago that mine had been stuck in this status for 8 days. Well it just showed up in my mailbox. I should have known better as it's happened before. Waiting on it to move from China and getting frustrated and it's here. Yay.

10 days this time, 6 days before that. I am looking for a reason to stop ordering from FT, and so far, I can't find one.

While I am posting, has anyone else noticed the DOVPO Safelink for mechs on FT?

It's basically a control head that screws into any mech mod and gives it some protections found in most APVs. Very interesting for sure.

$12.92 DOVPO Safe Link for Mechanical Mod and Atomizer - aluminum + brass / black + gold at FastTech - Worldwide Free Shipping

View attachment 396379

Edit - not the best pic sorry - I can't make it bigger

 

[InTheShade]

after saw your post i Got this one too today hope is working well for my SMPL Thanks

I'd greatly appreciate it if you could post up how it works for you. I find it very interesting and would like to know exactly what it does and what it doesn't do.

 

[freedomfighter]

ASAP Sir! i will take a picture

I'd greatly appreciate it if you could post up how it works for you. I find it very interesting and would like to know exactly what it does and what it doesn't do.

 

[VapinWolf]

I purchased the AK41 RDA. I cannot in good conscience recommend it, especially for less than experienced RDA vapers.
Machining is below par, o rings are very tight. One set screw will not tighten down on 30ga or smaller. Another slices through 30ga with no noticeable resistance.
For $11 it vapes good. I expect it might shine with a high wattage device but it is a PITA to set up and adjust (air intake/rotation)

Sent from my SM-G900V using Tapatalk

 

[readeuler]

Misunderstood... Thought InTheShade wanted a closer look at the SMPL clone.

 

[jbarrick]

Lazy and tired build my KF coil just order this

Pre-made Wires and Wicks for Atomizer (50-Pack)
Pre-Coiled Wires for Rebuildable Atomizers (50-Pack)

and some spare for my KF
Replacement Tank Section for Kayfun 3.1 / Kayfun Lite
Replacement Polycarbonate Tank for Kayfun 3.1 / Kayfun Lite

got some saving money after xmas need suggest is cloupor mini is good ? or should i am wait Kamry mini20W?
Thanks

cloupor mini will not ship for 20 day!!

Get a Authentic IPV Mini 30W by P4U - Black $51.00

 

[InTheShade]

Misunderstood... Thought InTheShade wanted a closer look at the SMPL clone.

Ah readeuler, you can show me your SMPL clone if you like - I'll gladly look at your pictures

 

[auxsend]

Ah readeuler, you can show me your SMPL clone if you like - I'll gladly look at your pictures

I recently got a copper SMPL clone from fast tech, and it's awesome. I'll have to get a picture. I am beyond happy with it.

 

[VapinWolf]

I wanted to do an updated post for my purchase of the AK41 RDA that I purchased from Fasttech. One thing I forgot to mention in the original post is you can only do a dual coil build.
For the update: I mentioned the o rings are very tight. I also have noticed the heat sink fins are kinda edgy. I lubed up the rings and vaped it about an hour last night. Performed well. I adjusted the air intake. I have a large section of skin missing from index finger a chunk of meat gone for my trouble. Even lubed the o rings are excessively tight.
I just can't recommend this even though it vaped well.

 

[crxess]

I hate dealing with USPS almost as much as I like dealing with Fasttech.
Great deals on good equipment.........................then USPS plays hide the package.

Not sure what this one is doing. First it went to New Jersey then to Dulles. Not it has left for Who knows where.