The FastTech Thread For All FastTech Posts

[DaxFX]

Just ordered my birthday present. Couldn't decide between the SVD or the Vamo V3 Stainless so I ordered both. Hey! It's for my birthday at the end of the month.

This is sick we are all sick we need terapy,, my birthday is in september and ive being buyng my birthday present since may for the next 20 years.. SVD, EVIC, VAMO, ZMAX, sigelei #9 lots of OEM protanks and EVODS, and every rda clone possible etc, the worst part I havent found my perfect vape yet


Sent from my iVap using Tapatalk HD

 

[e-pipeman]

Your center post may be getting pushed down. This is a common problem with the Vamo, even more so if you use Vivi novas on them. You could try taking a little screwdriver and gently pull that pin up a little, I need to do that to one of my ego's from time to time.

Interesting. When I put it on the Vamo it shows 9.9 ohm. Something not right there.

Edit: Tried the center post trick - it worked! Now vaping it successfully on my Vamo - many thanks for your help!

 

[sbc83]

Tried Liqua coffee yesterday. Meh, not bad but not my flavor. Taramisu is a lot smoother while still having that coffee flavor. Vanilla did help though.

 

[Ref Minor]

The X9 I got really trips me out the way it sounds like glass when you tap it with something.

It's uncanny isn't it.

 

[Ref Minor]

FastTech

It seems we now have a dedicated community forum for FastTech topics.

 

[tA71ana]

Just got my USPS tracking notify out of Hong Kong! My juice is on the way!! YaY!

 

[Myk]

FastTech

It seems we now have a dedicated community forum for FastTech topics.

What are the rules? Is this thread supposed to die or is that just a dumping ground for people who refuse to post their FT things in this thread?

 

[Myk]

I just ordered a stainless Vamo V3 CGR kit.
And then another order for batteries, cones and a couple rebuildable drippers (V9 and IGO-L).

I separated them so I wouldn't have a problem like lilmrsyeti had with the Vamo not being included.

This was tempting
$5.32 Marlbora Quit Smoking USB Rechargeable Electronic Cigarette with 7-Refills - mint flavor at FastTech - Worldwide Free Shipping

Nothing hits the spot like a good old Marlbora, but I fought the temptation.

 

[e-pipeman]

but I fought the temptation.

I seem to be doing that quite unsuccessfully lately.

 

[Myk]

I seem to be doing that quite unsuccessfully lately.

I'm good with that. It's not "my birthday" excuse, it's my over one year anniversary for not smoking, that lasts all year. Plus I just started DIY, I'm GOING to be saving so much money I can spend more

 

[brock957]

I ordered at 5 this morning. Recieved notice it shipped at 1:00.

 

[Borescoped]

Ok, finally got my Phoenix v4 RDA (the stainless steel one) from FT in... But all my Allen wrenches are too big. Anyone know what size allen wrench works on these set screws?

Popped by a local tool & fittings shop... the Phoenix v4 RDA from FT takes a .9mm allen wrench. Bought a pair of M2x5 stainless steel allen wrench style screws also while I was there, and they fit also, with a larger allen wrench.

 

[Capt.shay]

FastTech

It seems we now have a dedicated community forum for FastTech topics.

Wow ! I think some mods are just sick silly of all the Tech buzz in the forum. It has gotten a little silly. I think people just need to try to keep the comments in this thread.

I also think it is kind of funny that this thread got shut down twice and now this is the only one they want to have open

We just need to remember not to feed the trolls (even for personal reasons). The mods are also doing a better job of nuking post that are starting to head in that direction.

 

[SouthernBliss]

It seems we now have a dedicated community forum for FastTech topics.

Does that mean we talk to much?

 

[tA71ana]

FastTech

It seems we now have a dedicated community forum for FastTech topics.

I subscribed so I wouldn't lose track of where it is located in the Forum.
Awesome!
I wonder if Fasttech is reading any of this stuff?

I emailed them to ask if they would carry the new KSD KMax VV/VW....Would be so happy if they did.
I know of a least one other person that has emailed them about the KMax, too

 

[Butters78]

Ordered on the 9th my Liqua and charger for the iPad and should be delivered this afternoon. I'm very pleased once again.

Here's the tracking.

https://tools.usps.com/go/TrackConfirmAction?qtc_tLabels1=LK030880250HK

 

[crawler65]

I might have screwed up I ordered one of these: https://www.fasttech.com/products/1368500 but I don't have an eGo style charger. Do they come with a charger? It says nothing about one in the listing.

 

[boipayn]

i just got notice that my iTaste shipped today along with a 5 pack of eVod atomizer heating cores and a crimson eVod atomizer. This is my first order from them and I did have to wait almost 2 weeks for it to ship, but they emailed to say the delay was due to the iTaste not being up to their standards and were waiting for a better batch from their own supplier. I just hope the iTaste is as good as it looks and sounds. A local shop has them for sale for double the price of Fasttech, and they are very nice looking and feeling.. I love the fact that they wont roll around if laid flat!!

 

[Myk]

Ordered on the 9th my Liqua and charger for the iPad and should be delivered this afternoon. I'm very pleased once again.

Here's the tracking.

https://tools.usps.com/go/TrackConfirmAction?qtc_tLabels1=LK030880250HK

Thanks, now you got me impatient. I was prepared not to think about it for another month or until my orders arrived, whichever comes first. Now you got me thinking a week.

 

[HughDaHand]

I might have screwed up I ordered one of these: https://www.fasttech.com/products/1368500 but I don't have an eGo style charger. Do they come with a charger? It says nothing about one in the listing.

I think it needs a charger with a shorter sleeve than most ego chargers. x6 Variable Voltage 1300mAh eGo Battery - MyFreedomSmokes.com At least according to that seller.