The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

Madison76

Senior Member
ECF Veteran
Jun 26, 2013
105
108
Columbia, SC
I am using this charger
https://www.fasttech.com/products/1119501

I made my own kit when I ordered my SS Vamo V2 instead of ordering one of the pre made kits. One thing I have read several times is to pick the Nitecore/Panasonic kit over the "fire" kits.

They seemed to have learned and are offering a kit with a Nitecore charger.

$53.63 Vamo V3 Variable Voltage E-Cigarette Battery Compartment Set with OLED Screen - with Nitecore I2 US battery charger/charger cable/2*Panasonic 18650 batteries at FastTech - Worldwide Free Shipping - this is what I am eyeballing.
 

Borescoped

Ultra Member
ECF Veteran
Verified Member
Jun 24, 2013
1,814
5,178
Minot, ND
I am using this charger
https://www.fasttech.com/products/1119501

I made my own kit when I ordered my SS Vamo V2 instead of ordering one of the pre made kits. One thing I have read several times is to pick the Nitecore/Panasonic kit over the "fire" kits.




Which clearo did you get?

I did the same also, ordered the SS VAMO v2, the PD's and the Nitecore I2, basically making my own kit up. Now, it just needs to gets here!!!

Note: built my kit myself, because I wanted the PD's, and you can't get that as part of their premade kits. The kits have been out for a little while, the ones w/ the CH's.
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK

Many people advise getting the stainless steel over the silver as the finish on the silver and chrome wears off eventually. I haven't got one and am just repeating what others have said though.
 

HazMatt

Super Member
ECF Veteran
Verified Member
Apr 12, 2013
446
295
Columbia, TN, USA
I did the same also, ordered the SS VAMO v2, the PD's and the Nitecore I2, basically making my own kit up. Now, it just needs to gets here!!!

Note: built my kit myself, because I wanted the PD's, and you can't get that as part of their premade kits. The kits have been out for a little while, the ones w/ the CH's.

I chose the i4 because I am a gadget guy. I also ordered a flashlight that uses 18650s. I wanted to be able to charge 4 batteries at a time.
 

Nkayy

Senior Member
ECF Veteran
Jun 18, 2013
142
121
Los Angeles
What was the juice?

Sigh ... now I'm not sure. My taste buds are all messed up. It's juicy peach Hangsen from fassttech. I think it needs steeping. I tried carto and clearo back to back, tastes much better on carto, but has a strange perfumey taste. One clearo, its definitely more machine oil. I cleaned the wick in vodka and the whole body washed on hot water. I wonder if they just need to be soaked for a few days .. I'm not patient. I'm starting to think I should stick to cartos.

Otherwise the clearos have a really nice build quality. don't leak at all, its all easy to take apart and but toghether, and the colors are pretty.

Edit: Wine and Juicy peach together are incredible. Not overly sweet. Tastes kind of like sangria.
 
Last edited:

HazMatt

Super Member
ECF Veteran
Verified Member
Apr 12, 2013
446
295
Columbia, TN, USA

I have not tried them. So, I can only suggest that you thoroughly clean the clearos.

Though, I have had some clearos come with bad heads. In that case, you have to replace or rebuild the head.

I guess the e-liquid could be the cause. I have only tried 2 from FT and both were fine. Liqua cola and traditional tobacco. I have tried one juice that I absolutely hate. I am going to let it steep for a couple months and try it again.
 

tA71ana

Ultra Member
ECF Veteran
Verified Member
May 26, 2012
1,243
2,531
Round N Round the Mulberry Bush
Actually, I just tried the juice in the cartomizer and I think its the juice. Incredible how they could get a machine oil aftertaste in there.
Oh lawd I hope it isn't the juice, I just ordered 30ml of the Juicy Peach, lol
I would have ordered it in the Dekang but they didn't have it (this is my first Hangsen juice)
 

nipurava

Super Member
ECF Veteran
Verified Member
Nov 6, 2012
409
264
India
Many people advise getting the stainless steel over the silver as the finish on the silver and chrome wears off eventually. I haven't got one and am just repeating what others have said though.

black chrome version is the worst,it wears of with in days if you have sweaty hands
chrome finish better that black chrome . ss finish is the best
 

Nkayy

Senior Member
ECF Veteran
Jun 18, 2013
142
121
Los Angeles
Oh lawd I hope it isn't the juice, I just ordered 30ml of the Juicy Peach, lol
I would have ordered it in the Dekang but they didn't have it (this is my first Hangsen juice)

I don't like it as much as other peaches I have tasted, but it seems to be good for mixing. I like complex flavors, so I'll mix 2-3 things that don't normally go together, and I'll like it. I think it will get better with steeping. It kind of has that "please steep me" taste.
 

Nkayy

Senior Member
ECF Veteran
Jun 18, 2013
142
121
Los Angeles
Wow, that's really bad, esp to L.A. Def a problem w/ usps not ft. Hopefully it was just a mixup somewhere along the line.

really? It was pretty in line with my expectations. I order from various venors from Asia (not just e-cig stuff) and 2 weeks is decent. If I got it in 1 week I would be pretty shocked.
 

shannannagans

Super Member
ECF Veteran
Jun 6, 2013
446
582
Alabama USA
dont know about t2's but t3's don't work it seems

shannannagans i would like to know if evods work on x6 battery

My evod broke, so I don't know about that, but I have a Kanger that is the same width (a Kanger T2), and the T2 fits. The T4's also fit. It's snug, but they do fit. I'd worry about not being able to grip the bottom with my hand and unscrewing the bottom from the tank and leaking all over the battery because of the snug fit.

Evods may not fit because my MT3 and MT3s will not fit because of the metal overlay.
 
Status
Not open for further replies.

Users who are viewing this thread