The FastTech Thread For All FastTech Posts

Status
Not open for further replies.
Nice...not sure if these are new or if I just missed them

Serviceable eGo unit

eGo batteries that you can replace the batteries! Which means if the batteries "wear out" you don't chunk the whole device, just replace the battery, I have a Cree flashlight that takes 14500 batteries[AA sized Li Ion] (still recommend getting the IMR eFest or better from rdtvapor however [and DO NOT recommend using that unknown purple battery that comes with it])
$9.48 EGO 850mAh Rechargeable Battery for Electronic Cigarette - 1*14500 battery included at FastTech - Worldwide Free Shipping
1390801-1.jpg

Not a threaded base cap (spring loaded type locking cap)

Similar to the Kamry eCab V2 but a few bucks cheaper (has a threaded base cap which is WORTH it for a few bucks more]
https://www.fasttech.com/product/1372007
1372007-4.jpg

Threaded base cap

Yeah they are new on FT,,were added a few days ago..
 

SimianSteam

Super Member
ECF Veteran
Verified Member
Feb 2, 2013
941
1,322
46
The Jungle
Reminder and Notice :

http://www.e-cigarette-forum.com/forum/ecf-forum-rules/51178-forum-rules.html

9. Flaming, trolling, other misconduct
a. These are not permitted -
Trolling (includes but is not restricted to:
Posting something deliberately inflammatory - either to start a "flame war" or simply to cause difficulties for the Moderators.
Engaging in behaviour which is disruptive to the general operation of the Forum.

Who is this in reference to? Just want to make sure I didn't accidentally cross a line somewhere.
 

E_Cig Vicious

Senior Member
ECF Veteran
Verified Member
Apr 28, 2013
250
337
Gateway to the Midwest
After mechs and the MVP, my SVD has been demoted to ohm/battery checker because of the size :p


As a size reference an Astro kicked with 18350 and igo-w is the same size as an SVD in 18350 mode without a topper. I never did a test but it seems the battery life of the 18350 is also better in a kicked mech.
 

mgjohn

Senior Member
ECF Veteran
May 5, 2013
88
57
DiabloGrande
Nice...not sure if these are new or if I just missed them

Serviceable eGo unit

eGo batteries that you can replace the batteries! Which means if the batteries "wear out" you don't chunk the whole device, just replace the battery, I have a Cree flashlight that takes 14500 batteries[AA sized Li Ion] (still recommend getting the IMR eFest or better from rdtvapor however [and DO NOT recommend using that unknown purple battery that comes with it])
$9.48 EGO 850mAh Rechargeable Battery for Electronic Cigarette - 1*14500 battery included at FastTech - Worldwide Free Shipping
1390801-1.jpg

Not a threaded base cap (spring loaded type locking cap)

Similar to the Kamry eCab V2 but a few bucks cheaper (has a threaded base cap which is WORTH it for a few bucks more]
https://www.fasttech.com/product/1372007
1372007-4.jpg

Threaded base cap

I have a couple of the Kamry V2's they're great. Nice size and long lasting with the 14500 battery. The only problem I've had with them is the head will loosen from the tube. Easily fixed with a drop of super glue.
 

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
I have a couple of the Kamry V2's they're great. Nice size and long lasting with the 14500 battery. The only problem I've had with them is the head will loosen from the tube. Easily fixed with a drop of super glue.
Do they have the" low volts 10 flash" like regular ego's so the battery won't overdrain? And are they multi-volt regulated (from the discussions) or just straight voltage?

If it does...might be a great rig...this way they aren't just throw em away if the battery goes bad rig
 
Last edited:

mgjohn

Senior Member
ECF Veteran
May 5, 2013
88
57
DiabloGrande
Do they have the" low volts 10 flash" like regular ego's so the battery won't overdrain?

Yes, seems like there is flashing when the battery is discharged.

Regarding the head, it is a crimp fit on top and every movement of your clearomizer/atomizer will wobble it loose. Gets continually worse. I just haven't recrimped and glued mine yet.
 

goober

Super Member
ECF Veteran
Verified Member
Sep 4, 2011
400
247
PA
Ahhhhhhhhh, I laughed so hard I had a coughing fit :p

Well, this is my current rotation and I must say that I am VERY PLEASED with the potential =] I've got 2 packages with PV/topper displays in Acceptance, 2 orders waiting for a Fairy Godmother to wave her wand over them [1 is 100% ready to ship & 1 is restocking a replacement that was damaged in shipping], and finally, 2 items in my cart that I'm thinking about but are not in stock anyway LOL

e8phmt.jpg


101vape black carbon wrapped MVP2 with K101 atomizer sleeve [Backwoods Brew Conundrum]
101vape white carbon wrapped MVP2 with HealthCabin Bronze Hypertank [Mt Baker Vapor Cinnamon Roll]
Silver FastTech MVP2 with a Valley View Vapes 8ml polypro Boge carto tank [Caterpillar Vapes Apple Martini Hangsen Shisha]
FastTech kicked Poldiac with an AGA T2 [Waffle+Brown Sugar+Cotton Candy+Blueberry+Cherry DIY]
FastTech ePipe with a Valley View Vapes 3ml polypro Boge carto tank [FastTech Dekang Turkish]

Where do you get those slanted drip tips?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????



Just incase I didn't make myself clear

?
 

RANGERmsr

Super Member
ECF Veteran
Verified Member
Yeah they are new on FT,,were added a few days ago..

I got two of these in some of my first orders from here. (the ones with the purple batts). I also have the kamry. The ego's are better, and work great, but I had to use lr coils to get to my happy spot. I usually carry these around to work. I won't feel as bad if I lose/break them

For me, they work best with a mini pro tank coiled at 1.5 ohms. I measured voltage off the top with a fresh battery @ 3.4 (no load). Of course the VOM I used was a cheap one
 

Patkid

Vaping Master
ECF Veteran
Verified Member
Apr 15, 2013
3,349
22,010
78
Rockford, IL
Ahhhhhhhhh, I laughed so hard I had a coughing fit :p

Well, this is my current rotation and I must say that I am VERY PLEASED with the potential =] I've got 2 packages with PV/topper displays in Acceptance, 2 orders waiting for a Fairy Godmother to wave her wand over them [1 is 100% ready to ship & 1 is restocking a replacement that was damaged in shipping], and finally, 2 items in my cart that I'm thinking about but are not in stock anyway LOL

e8phmt.jpg


101vape black carbon wrapped MVP2 with K101 atomizer sleeve [Backwoods Brew Conundrum]
101vape white carbon wrapped MVP2 with HealthCabin Bronze Hypertank [Mt Baker Vapor Cinnamon Roll]
Silver FastTech MVP2 with a Valley View Vapes 8ml polypro Boge carto tank [Caterpillar Vapes Apple Martini Hangsen Shisha]
FastTech kicked Poldiac with an AGA T2 [Waffle+Brown Sugar+Cotton Candy+Blueberry+Cherry DIY]
FastTech ePipe with a Valley View Vapes 3ml polypro Boge carto tank [FastTech Dekang Turkish]

Hi, Lisa,
what is a topper display, pls and TY?
Could you link the sku?
Pat
 

RANGERmsr

Super Member
ECF Veteran
Verified Member
Yes, seems like there is flashing when the battery is discharged.

Regarding the head, it is a crimp fit on top and every movement of your clearomizer/atomizer will wobble it loose. Gets continually worse. I just haven't recrimped and glued mine yet.
Yep. That was the problem I had with these too. I quit using it. It couldn't keep up with me

I like the ego better. It also has the low volt flash warning
 

Burnie

The Bug Man
ECF Veteran
Verified Member
Jul 1, 2009
5,565
18,198
Sunny Florida
Nice...not sure if these are new or if I just missed them

Serviceable eGo unit
Kamry eCab V2 but a few bucks cheaper (has a threaded base cap which is WORTH it for a few bucks more]
https://www.fasttech.com/product/1372007
1372007-4.jpg

Threaded base cap

I have 2 of these from FT, work great. Only thing is the battery diameter you have to be wary of, some are too big.

Do they have the" low volts 10 flash" like regular ego's so the battery won't overdrain? And are they multi-volt regulated (from the discussions) or just straight voltage?

If it does...might be a great rig...this way they aren't just throw em away if the battery goes bad rig

Yes 10 flash, and yes multi-volt, 3 settings and off with 5 clicks.

Vape On
:vapor:
 

Camaroboi13

Senior Member
ECF Veteran
Verified Member
Oct 28, 2013
170
185
San Bernardino, CA, USA
Does anybody know if fasttech (or any clone vendor for that matter) sells the bagua 14500 clone in 2 tone stainless/brass? I've seen the variants in the 18XXX size but not the 14XXX size. Looking for a good pocket piece but I want it to be all pretty n stuff lol. The only 14500 clone of the bagua I've seen has been the all stainless or brushed stainless one, but I want the top ring and locking ring to be brass. Anybody know if parts from another one are compatible?
 

Patkid

Vaping Master
ECF Veteran
Verified Member
Apr 15, 2013
3,349
22,010
78
Rockford, IL
You know what?
I have been progressing from v2 cig a likes to egos to itazte vv vw 3, to MVP2 and enjoying the ride!!
I've been very happy w/ my FT purchases and have learned not to sweat the delivery.
I got sidetracked
sorry
My favorite battery of all time ( just a few months LOL) is the evod clone batters from FT. I just love them. Not sure why but my juice tastes better whether it is in an evod or a mini protank or an i16 while using those batters.
Now I see FT has evod batters w/ vv.
I am debating taking a chance on ordering them.
They are less than 1/2 the price I can find here in the US.
If it were just a couple bux I would not consider taking the chance, but they are about $11 cheaper and even have more of a saving if I order the 7 pack of various colors.
Thoughts?
 

pmcode

Senior Member
ECF Veteran
Verified Member
Sep 22, 2013
270
246
Barstow, CA

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
You know what?
I have been progressing from v2 cig a likes to egos to itazte vv vw 3, to MVP2 and enjoying the ride!!
I've been very happy w/ my FT purchases and have learned not to sweat the delivery.
I got sidetracked
sorry
My favorite battery of all time ( just a few months LOL) is the evod clone batters from FT. I just love them. Not sure why but my juice tastes better whether it is in an evod or a mini protank or an i16 while using those batters.
Now I see FT has evod batters w/ vv.
I am debating taking a chance on ordering them.
They are less than 1/2 the price I can find here in the US.
If it were just a couple bux I would not consider taking the chance, but they are about $11 cheaper and even have more of a saving if I order the 7 pack of various colors.
Thoughts?

Buy just one to see, if you like it buy the 7 pack and don't forget to tell us if they are good or bad.
 
Status
Not open for further replies.

Users who are viewing this thread