The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
eGo Lanyard Leather Carrying Pouch Bag for Ego-T/Ego-C/Ego-W/Ego-D
41cm, Carrying Bag / SKU: 1315802
Price
$1.70 QTY
1 › Reorder › Return, replace (RMA), and support
› Write a review


line total $8.61 Mini Protank-II Style Bottom Coil Glassomizer (1.5mL)
Pink, 2.2ohm(Glass tank) / SKU: 1494101
Price
$8.61 QTY
1 › Reorder › Return, replace (RMA), and support
› Write a review


line total $4.73 Authentic Protank Clearomizer Coil Heads (5-Pack)
Coil Heads, 1.8ohm, 5-Pack / SKU: 1476404
Price
$4.73 QTY
1 › Reorder › Return, replace (RMA), and support
› Write a review


line total $3.32 RGM2 Bottom Coil Clearomizer (2.0mL)
RGM2, Red, 2.2ohm / SKU: 1535301
Price
$3.32 QTY
1 › Reorder › Return, replace (RMA), and support
› Write a review


line total $3.32 RGM2 Bottom Coil Clearomizer (2.0mL)
RGM2, Stainless, 2.2ohm / SKU: 1535302
Price
$3.32 QTY
1 › Reorder › Return, replace (RMA), and support
› Write a review

Shipment Total $21.68


The 2 RGM2 must have been in a different warehouse and was holding up the order and was thinking of cancelling the RG's, I'm glad now I just waited.
All of those bottom coil designs (protank and EVOD coils)...I can attest to the full cotton rebuild, these things are BEASTS when are running cotton inside the wick and as a flavor wick! Heck they do a whole lot better than stock with a tiny bit of "tune-up" by replacing the silica flavor wick with cotton, and leaving the silica wick inside the coils

Just a FYI, I got the same neck lanyard, My Vamo fit right in it well with a bit of coaxing :D

 
Last edited:

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
1601320_10201619073506386_1674357134_n.jpg
 

boborone

Super Member
ECF Veteran
Nov 13, 2013
590
661
Plano, Tx
My order from the 18th just shipped. There's hope.

I've had one move from packaging to shipped. Luckily it was the one with Nemesis and Russian clones. Just going the other 2 move before the break. One has a kick that I'd like to have with the nemesis.

Sent from my Nexus 5 using Tapatalk
 

Exile

Super Member
ECF Veteran
Feb 5, 2013
544
410
Dallas,Tx
It was cheap enough ordering the "Ultimate Nemesis Mechanical Mod Upgrade" from "Fat Daddy V"

what does the upgrade kit do?

I had bought the "Nemesis Mechanical Mod Ultimate Upgrade" from FatDaddyVapes, and man did it make a world of difference to my Nemesis!

I cant speak for the FT Nemesis magnets, but this kit comes with 2 bigger/stronger magnets (than the Nemesis magnets that I originally got from VapeRoyalty), and longer/extended positive & negative post/pins so you can take the excess slop out and use the beauty/kick ring.

My bottom switch now feels sooo much better (not wobbly), and I can now finally stand my Nemesis up on end without it firing!

http://fatdaddyvapes.com/shop.html
 
Last edited:

mekc57

Super Member
ECF Veteran
Verified Member
Oct 27, 2013
530
2,748
Oregon
I had bought the "Nemesis Mechanical Mod Ultimate Upgrade" from FatDaddyVapes, and man did it make a world of difference to my Nemesis!

I cant speak for the FT Nemesis magnets, but this kit comes with 2 bigger/stronger magnets (than the Nemesis magnets that I originally got from VapeRoyalty), and longer/extended positive & negative post/pins so you can take the excess slop out and use the beauty/kick ring.

My bottom switch now feels sooo much better (not wobbly), and I can now finally stand my Nemesis up on end without it firing!

SHOP - FatDaddyVapes.com - Home of the best vaping equipment, eliquids, and supplies!!!

I'm going to try this! I picked up a magnet set online somewhere but It's to soft. Hope this will make a difference.
 

clg2dc84

Full Member
Jan 6, 2014
29
8
PA
YAY!!!!!
I just received my FIRST item ever from FastTech. Been waiting for near a month of Sundays. Vapemail is AWESOME!!!!
I ordered a M11. It is smaller then I imagined. First thing I put on it was my TRIDENT with a sub ohm nano coil. It hit like it was on my BOLT, but a lot smaller.
The BOLT is my first mod. Semi-mechanical, but this tiny M11 is my first full mechanical mod. I'm LOVIN IT!!!!!
Now, if my COBRA GENESIS CLONE arrives soon, I'll be even happier. I will need more 14500's for this M11. I have 2 in my 5v box mod I made, and 2 others I'll be using for the M11.
I'll have to get flat top ones to fit the M11 properly though. These button tops work, but doesn't fit properly. EFEST time......
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
My fasttech order from 1/21/14 is listed as shipped with tracking# as of early this afternoon :banana: .. I wasn't surprised that I didn't receive the usual email confirmation for shipping and photo of my package, they are probably working like dogs to get as many orders out as possible. My most recent Epacket order from Focalecig made it from acceptance to delivered in 7 days, I sure hope I have the same luck with this FT order. I have also had good luck in terms of shipping with all of my FT orders.
 

sbc83

Ultra Member
ECF Veteran
May 16, 2013
1,125
1,161
90210
Order placed 1/11 that shipped 1/17 (5day restock) and accepted on the 21st left Cali today and should be here middle of next week.

I made another purchase on the 17th cause I sold some old vape supplies, normally I don't exceed my monthly budget but this is different. It was pretty much a stock up on my fav juice order. 5 30ml Hangsen Marb Mix mint, 10ml Hangsen blackberry and dekang fruit punch for something different, wick and a ego charger cause I had to give one up.

So, ordered on the 17th and shipped today. It too had a 3day ship date.
 
Last edited:

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
Well here it is...

I was very disappointed when I got mine (a week or so ago) and the top cap 510 thread had a burr in it and it just sat on my desk mocking me...could not screw down the Caravela RBA on it, or any 510 device, ordered a 7x.5mm thread tap and waited a week for it to arrive [was NOT going to wait another flipping month unless I couldn't fix it], removed the insulator (it unscrews) and positive pin, cleaned up the threads and now the tank screws on nicely (definitely had other issues as the tap pulled of very tiny bits of metal all the way thru the threads..maybe they used a dull tap...who knows)

Put a 18500 and a kick in it, found that there is a gap [due to center firing pin about 2-3mm too long], will have to get the shorter positive center pin to tighten everything up.

All in all quite impressed by a $21.96 mod and a $17.29 matching RBA (even thought the tank is pretty much an I-Atty with pretty etching on it) So for less than $40 got a pretty nice looking rig...

Caravela_zps5b7caf7b.jpg


There is another flaw...the center positive pin is maybe 2-3 mm too long, none of the tanks will screw down and/or the base, either will have to grind down the center positive pin or go to lowes and get a M4 or M5 setscrew and use that... shortening it maybe an 1/8" of an inch will fix most of these problems (I tried it with a flattop Efest 2000mAh 18650 and a Efest 1100mAh 18500 w/ kick...same thing..the darn pin is just a wee bit too long (or the body is too short on all three sizes)
 
Last edited:

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
YAY!!!!!
I just received my FIRST item ever from FastTech. Been waiting for near a month of Sundays. Vapemail is AWESOME!!!!
I ordered a M11. It is smaller then I imagined. First thing I put on it was my TRIDENT with a sub ohm nano coil. It hit like it was on my BOLT, but a lot smaller.
The BOLT is my first mod. Semi-mechanical, but this tiny M11 is my first full mechanical mod. I'm LOVIN IT!!!!!
Now, if my COBRA GENESIS CLONE arrives soon, I'll be even happier. I will need more 14500's for this M11. I have 2 in my 5v box mod I made, and 2 others I'll be using for the M11.
I'll have to get flat top ones to fit the M11 properly though. These button tops work, but doesn't fit properly. EFEST time......
Pics and shipping list (w/ ordered and received dates) with linkys to the SKU's...it's what us fasttech folks do :D
 

soupy1970

Senior Member
ECF Veteran
Nov 22, 2013
117
68
United States
Links links links people....sheesh :D

Looking for a really good flashlight to put some of the not good 18650's you might have gotten into?
https://www.fasttech.com/p/1520403
1520403-8.jpg

Honestly this thing throws a TON of light, and then can be focused down to a small beam for really far away viewing

+1 I have this flashlight and really like it. I bought it to have something to toss my salvaged laptop batteries into. I don't think I will have to worry about a dead flashlights anymore.
 

vapero

Ultra Member
ECF Veteran
Verified Member
Mar 13, 2013
2,830
3,566
monterrey,mexico
YAY!!!!!
I just received my FIRST item ever from FastTech. Been waiting for near a month of Sundays. Vapemail is AWESOME!!!!
I ordered a M11. It is smaller then I imagined. First thing I put on it was my TRIDENT with a sub ohm nano coil. It hit like it was on my BOLT, but a lot smaller.
The BOLT is my first mod. Semi-mechanical, but this tiny M11 is my first full mechanical mod. I'm LOVIN IT!!!!!
Now, if my COBRA GENESIS CLONE arrives soon, I'll be even happier. I will need more 14500's for this M11. I have 2 in my 5v box mod I made, and 2 others I'll be using for the M11.
I'll have to get flat top ones to fit the M11 properly though. These button tops work, but doesn't fit properly. EFEST time......

14XXX batteries are not safe to use with sub-ohms!
 
Status
Not open for further replies.

Users who are viewing this thread