The FastTech Thread For All FastTech Posts

[pcrdude]

I tried one of my FT EVODs. Filled with coumarin pipe from MVP (50/50), let soak in for about 5 minutes, and vaped. It tasted burnt after the third draw. All my FT EVOD coils are the long ones, and this particular one measured out at 2.5 ohms. Based on this, I may need to replace the coil with a Kanger and try again. I may not be liking these FT EVODs too much.......

 

[Geee]

I pulled the trigger and ordered $200+ of gear on the 12th. fasttech sent me a photo of the addressed envelope last Monday. Also was a tracking number. Still cant track in US but one of the links on this thread did find the package in Hong Kong for processing.

This is one of those times when you just need to sit back and relax. Having bought quite a bit of stuff off of E-bay from China, some items have taken 30 days to arrive.

 

[Butters78]

I tried one of my FT EVODs. Filled with coumarin pipe from MVP (50/50), let soak in for about 5 minutes, and vaped. It tasted burnt after the third draw. All my FT EVOD coils are the long ones, and this particular one measured out at 2.5 ohms. Based on this, I may need to replace the coil with a Kanger and try again. I may not be liking these FT EVODs too much.......

Try the kanger heads like you said. I did yesterday and they work fine.

 

[NGAHaze]

https://www.fasttech.com/products/0/10004946/1384100-did-v2-mini-rebuildable-atomizer-for-diy-18ml
what are your thoughts on this?

I bought the version of this that has a clear tank ... I didn't get much use out it before the tank cracked and I wasn't using any known tank cracking juices either. That one has a SS tank so obviously this wouldn't be an issue however, you should be aware that it is very small, much more so than it would appear from the pics on the FT site.

 

[ricardo rt]

Hi all. Have bought of fast tech and vaporbreak before. Vaporbreak is cheaper for me with bigger orders. Got a bunch of vamos there! But i just found another site that sells the blade and the wife wants colors and the blade from cheapezy is to her liking. Anyone tired the blade? Is it ok or just a gimmick. Searching for it on ecf is leading me to this thread so if you have an opinion. chime in! Thanks.

 

[ricardo rt]

i also pass on orders to friends for fun and the girls want colours (faceplant) so the blade seems like it could be the solution? Cheapest Blade mod here if you do not know it any advice appreciated.

 

[Butters78]

Thank you members that replied to me

So registered mail is the fastest option to use? or regular?

Definitely USPS.

 

[Dusif]

what batteries do you have?

Trustfire IMR 18350
800mah 3,7v

 

[DeeDee1234]

Definitely USPS.

I just saw that Kamry knock off protank. If it's coming today can you let me know how it works? Thanks


D

 

[Butters78]

I just saw that Kamry knock off protank. If it's coming today can you let me know how it works? Thanks


D

I will. I'll take a pic as well. I'm also getting in the AnyVape bcc but Fastech doesn't sell those. I'm sure they will though if it takes off.

 

[nipurava]

Trustfire IMR 18350
800mah 3,7v

as far as i know 18350 is not good for sub ohm vaping as they have less amp limit than 18650
and trustfire is ICR not IMR dont use them for sub ohm vaping.
panny cgr18650ch 10A discharge rate is the best battery for mech mods.
if you wan less that 0.6 ohm coil then get MNKE battery which has 20A discharge rate.
2cent safety fuse for short circuit protection,muiti meter to check the resistance and shorts.
these are things that you must have in hand before you try building a sub ohm coil.
safety fuse is must

 

[DaxFX]

https://www.fasttech.com/products/0/10004946/1384100-did-v2-mini-rebuildable-atomizer-for-diy-18ml
what are your thoughts on this?

I have 1 with plastic tank, the one you post is metal tank, is a very solid tank, mine is setup with silica cuz i wass not succes with mesh and after set it up with silica i did prefer the flavor on silica.. You wont be wrong is a very good tank , go get it.

Sent from my iVap using Tapatalk HD

 

[DeeDee1234]

I will. I'll take a pic as well. I'm also getting in the AnyVape bcc but Fastech doesn't sell those. I'm sure they will though if it takes off.

They have these,

https://www.fasttech.com/products/0...x9-protank-clearomizer-with-pyrex-glass-tanks

 

[donesmokin]

Just for kicks I put the big tube on mine with 18350's stacked to see what that was like. Turns out it could probably get you busted for carrying a concealed weapon. I'll stick to the short mode

That's how I run mine all the time. With three battery tubes you could run stacked 18650's and get some serious run time. And maybe get arrested.

 

[DeeDee1234]

That's how I run mine all the time. With three battery tubes you could run stacked 18650's and get some serious run time. And maybe get arrested.

Get the man a cloak he already has the light saber

 

[sbc83]

13 days total from purchase date:

Delivered
June 21, 2013, 2:29 pm
GRAYSLAKE, IL 60030
International Letter

Arrival at Unit
June 21, 2013, 5:31 am
GRAYSLAKE, IL 60030

Depart USPS Sort Facility
June 21, 2013
ELK GROVE VILLAGE, IL 60007

Processed through USPS Sort Facility
June 21, 2013, 2:14 am
ELK GROVE VILLAGE, IL 60007

Processed through USPS Sort Facility
June 18, 2013, 11:36 am
BURLINGAME, CA 94010

Origin Post is Preparing Shipment

Processed Through Sort Facility
June 15, 2013, 8:27 am
HONG KONG AIR MAIL CENTRE, HONG KONG

Acceptance
June 14, 2013, 12:05 pm
HONG KONG

---------------------------------------------------------------------------

8 days total from purchase date:

Arrival at Unit
June 22, 2013, 5:12 am
GRAYSLAKE, IL 60030
International Letter

Depart USPS Sort Facility
June 22, 2013
ELK GROVE VILLAGE, IL 60007

Processed through USPS Sort Facility
June 21, 2013, 9:52 pm
ELK GROVE VILLAGE, IL 60007

Depart USPS Sort Facility
June 20, 2013
SAN FRANCISCO, CA 94128

Processed through USPS Sort Facility
June 20, 2013, 11:00 am
SAN FRANCISCO, CA 94128

Processed Through Sort Facility
June 19, 2013, 9:17 am
HONG KONG AIR MAIL CENTRE, HONG KONG

Acceptance
June 17, 2013, 3:13 pm
HONG KONG

I think this one got flown over from SF. Should be delivered in a couple hours

 

[TheSystemHasFailed]

as far as i know 18350 is not good for sub ohm vaping as they have less amp limit than 18650
and trustfire is ICR not IMR dont use them for sub ohm vaping.
panny cgr18650ch 10A discharge rate is the best battery for mech mods.
if you wan less that 0.6 ohm coil then get MNKE battery which has 20A discharge rate.
2cent safety fuse for short circuit protection,muiti meter to check the resistance and shorts.
these are things that you must have in hand before you try building a sub ohm coil.
safety fuse is must

Or...those new ORBTRONICS (a'hem) PD2900 NCR's. Much more whack than the MNKE's. 18a hit 5-6 max discharge seconds. Straight from the sub-ohm god himself's mouth. Bishopheals.

Although, you DO want a fuse. I recommend the short stop. Reusable and durable.

 

[puchox]

They added more Hangsen flavors today but those bottle aren't hangsen i'll contact them and see if they are placeholders or what.

If it's the real deal for 3.6 for 30mL it's amazing, the mango i have is better than the liquas i have.

 

[kiwivap]

My SVD is in transit to NZ. According to tracking. If that's the case the actual delivery time will be fast for international. And its Singapore Post.

 

[Heavyrocker]

https://www.fasttech.com/products/0/10004946/1384100-did-v2-mini-rebuildable-atomizer-for-diy-18ml
what are your thoughts on this?

I dont like tanks where i cant see the juice,i have a couple of all metal nova tanks tho just in case i vape ''cracking'' juices.